Reviews
need not be lost
It is used on the Key of Motorcycle.
It stands out and I don't have to lose it in the house.
I like the fact that the eyes glow.
View detail
Spoke Wrap
Spoke Wrap installed on WR
To install, simply match the length, cut, and put it on.
The only tool you need is the power of your fingertips (laughs).
Install with patience. We have only partially installed it yet.
It looks better now.
View detail
Convenient
It is very small and compact, so it was convenient to carry it with me and use it on a sudden rainy day.
It is easy to put on shoes and dries quickly, so you don't have to worry even if it rains for days on end.
View detail
Good
Red and Black colors are fashionable.
WRing is useful for removing only the necessary keys.
The design is also simple and never boring.
View detail
Tabletop use
Compact, so it can be used on a tabletop.
It is easy to install because it works as long as a USB power supply is available.
This is useful when doing RemoteWork in the summer.
View detail
Mirror Bracket
I purchased this product because I wanted to shorten the Stay of Mirror that I am using.
This is a customization of Mirror for old cars while keeping the OEM style. I also used it on an old Yamaha two-stroke car, and the mirrors were lowered to make it more stylish.
View detail
Consumables of any kind
Vibration is an inherent part of single-cylinder, especially SmallEngine Displacement VolumeMotorcycles.
Tail lamp bulbs often burn out, but after many years of use, the tail lamp lens often develops cracks. It is a consumable item.
This product is OEM compatible.
good point
The position of the screw holes, etc. is also exact because it is an OEM compatible product.
Visibility is also satisfied.
Easy to obtain, inexpensive.
There are no drawbacks as it is a security PARTS.
In my experience, rain can penetrate through cracks in the tail lamp lens and cause problems with the electrical system, so it is a good idea to check this area.
The price is cheap, so I don't think you'll have a problem with Stock.
By the way, I always have about three Stocks (laughs).
You can ask a Motorcycle shop to do it for you, but if it is this replacement, it is more economical to do it yourself.
View detail
It's solid
Easily installed on the air-conditioner's air vent louver.
The Smartphone Holder can hold a Smartphone securely.
It is a simple shape, so you will never get tired of it.
View detail
I'm glad I changed you.
I replaced it with this product to clean up the Handlebar area.
I think the price is a little high, but I am Large satisfied with the look of the design.
View detail
Good price
I have installed the Lever Cover on most of the motorcycles in my garage, and when I first installed it, it felt strange because the lever was a bit thicker, but the fit was good and it looked fashionable, so once I used it, I got used to it. I am very happy with the results.
To install, it is difficult to insert the cover into the lever, but if you put a little detergent on the lever, soak the lever cover in water, and slowly and unhurriedly turn the cover round and round, it will go in. Once it is in, make sure to rinse off the detergent and dry thoroughly. Never use lubricant because it will not fit.
View detail
Fits: HONDA MAGNA50, HONDA MAGNA50, HONDA MAGNA50, HONDA XR50 MOTARD, HONDA MONKEY RT, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY R, HONDA XR100MOTARD, HONDA NSR80, HONDA NSR80, HONDA NSR80, HONDA NSR80, HONDA NSR80, HONDA NSR50, HONDA NSR50, HONDA NS50F, HONDA NS-1, HONDA NS-1, HONDA NS-1
Brake lever of the cheapest NSR50
It breaks off as soon as it is put away if it rubs, but it is enough for the low price.
It helps me when I ride Circuit with NSR50 because I don't have enough room in my Gold.
I think it can be used with NSR50ALL MODEL.
View detail
Fits: HONDA MBX50, HONDA MBX50, HONDA NS50F, HONDA NS50F, HONDA NS50F, HONDA NS50F, HONDA NS50F, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50, HONDA NSR50, HONDA NSR50, HONDA NSR50, HONDA NSR80, HONDA NSR80, HONDA NSR80, HONDA NSR80, HONDA MBX50, HONDA MBX50
Can be used for the first half of NSR50.
It can be used only for NSR50 types that have a clutch lever on the switch box of Blinker and Light.
I think it is used only for First Model Type.
View detail
Bass heavier than expected
It is a change from Small, and it sounds moderately good now. I will run with this for a while. View detail
The car passed inspection.
I found this product when I was looking for something inexpensive for vehicle inspections because LED lights are not compatible with vehicle inspections.
It does not correspond to Japanese Vehicle Inspection.
I don't know about durability as I switched back to LED Light immediately after inspection, and I don't know if it will pass inspection on another vehicle, so you are on your own when purchasing.
View detail
Plastic model of real Large
[How is it used?
I purchased this product for maintenance of D-Tra.
Was the one you received as per Image?
Well, it's like a so-called "maid in china" itself.
Was it difficult to assemble?
My initial expectation was that I would be able to assemble this thing in 30 minutes, but to my surprise, it took me 1 hour and 30 minutes! This is not worthy of being a pillar! If there was a hole, I'd want to get in it! W!
First of all, there is no Instruction Manual. No, there is a photographic illustration, but there is no verbal explanation at all.
There are two different Bolt lengths, but they differ by about 5mm, so it is not clear which is which in the picture. It is only when you actually assemble it that you can tell which one to use. The Bolt fixing method for the top panel and the four legs is, oh my! The picture shows that the washer is supposed to be inserted on the Bolt side (Front side), but in reality, the legs cannot be fixed unless the washer is inserted on the Nut side (Reverse side). The diameter of the hole in the leg side is larger than that of the nut, so the nut cannot be used unless a washer with a larger diameter than the hole is inserted. (See the photo:the area circled with a blue double circle)
Since plastic is tightened with bolt and nut, if it is tightened too hard, it will crack, so it is tightened with moderate torque, but it is expected to loosen while being used, so all bolt and nut are fixed with Screw Loosening Fluid.
How was your experience with it?
I just put a D-Tiger on it once as a test, and it was fine, but not too bad. There is a 75mm diameter hole in the center of the top panel, so I can use this hole to drain engine oil with a motorcycle in STAND.
[Included Parts:were they on?
All the necessary parts were available for assembly. Tools needed were a 4mm Hexagonal Wrench and a 10mm Spanner.
[Was there anything that disappointed you?
I didn't expect much from the beginning... . w
Other items that would be helpful
Point of assembly and hang:. "If you do, it will be done; if you don't do, it will be done." by Uesugi Takayama
Instruction Manual availability and clarity:don't read the Instruction Manual! Feel it!
Note:Assemble when you have time to spare. w
Items to buy together:Screw Loosening Solution
Opinions and requests to Manufacturer:verbal explanation Pulley's w
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
I can't fix it.
I couldn't fix it, so I had to devise my own way to fix it.
I don't know if brightness is an issue.
View detail
Fits: Others Communal to 12V/24V
There is a caveat
First of all, only the cap is waterproof. The cord drawer is not waterproof.
The length of the cord is about 90 cm, and the end of the wire is soldered up, but the terminal etc. must be provided separately.
When the Switch is turned ON, the Red color LED located behind the Small hole in the Center will light up.
If you want to use it all the time, you will probably want to fix it to a handlebar or the like, but a fixed bracket does not allow for fine adjustment of the orientation, etc.
I decided to place it under the Seat because my purpose of using it is to be able to charge my phone while on the move.
Since there is a switch, it is durable even when directly attached to a battery, but if you are concerned, you may need to use Relay from ACCLine, etc.
View detail
Good stuff
Installed on CYGNUS X2 model.
Since it is a scooter, the replacement work is a bit tedious, but since it has been my partner for more than 10 years, I was careful not to scratch the body of the scooter by applying Dustcloth to the claws of the Cover, and the installation was completed in about 30 minutes! The "M" is the name of the machine.
And for Light removal, a star-shaped Hexagonal (T-25) Is required.
I went to the Tunnel and back a few times to check it out, and the light was very good, so I adjusted the optical axis, went back and forth to the Tunnel again, touched the headlight, and then went back to the Tunnel again. I wondered how much heat it would generate, but it was not very high, so I went home.
Since it is a Scooter, the Light and Harness are separate, so the installation is smooth, but for older Small Type cars, we recommend that you tidy up the Light case before installation.
View detail
Blinker is now blinking!
The OEM Blinker was used and expensive, so I went with the SR400 Blinker, which has a similar shape.
When the voltage dropped, the Blinker stopped blinking.
I just had it looked at by a motorcycle shop. The winker relay seemed to be wrong as it was. If you don't know any better, just get one of those ICRelay ones." So I decided to go with this inexpensive, 2-pin product.
After replacing it with this product, it started flashing without any problem even without the Engine running (even with low voltage).
When I installed it. The direction of the pin was different from that of the original Relay, which made me nervous.
I was able to attach it without any problem with the original wiring length. (Is the wiring a bit of a burden?).
The side cover also came on without any problem.
The blinker doesn't blink when the voltage is low... Refreshing!
I heard it's not water resistant, but I'll think about it then.
View detail
Products that are dangerous in winter
The first thing that failed me was the material:the plastic was too slippery and too thick to grip with thick gloves in this cold weather. I will replace them in a few days. I'll replace it in a few days. View detail