Reviews
"It was attached to Aprio type 2. Although a genuine lens was not broken, since it was cheap on sale and spring came, I purchased for a custom. Appearance changed by the clear lens and it became very good touch. The attached bulb is not used and I set L
"It was attached to Aprio type 2. Although a genuine lens was not broken, since it was cheap on sale and spring came, I purchased for a custom. Appearance changed by the clear lens and it became very good touch. The attached bulb is not used and I set LED. Since attachment is also easy, it is recommended for an introduction custom." View detail
Fits: HONDA GB250 Clubman, HONDA VRX400 Roadster, HONDA VT250F/Integra, HONDA Shadow 400, HONDA Shadow 750., HONDA Shadow Slasher 400, HONDA Steed 400, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA Hornet 250, HONDA Hornet 600, HONDA Magna (V-twin Magna), HONDA Magna 750, HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F
It was used for XELVIS which I had ridden before. Although a product which was alike are also sold from the other company, a price is reasonable and it is good for a poor rider like me. It was perfect and good shopping.
It was used for XELVIS which I had ridden before. Although a product which was alike are also sold from the other company, a price is reasonable and it is good for a poor rider like me. It was perfect and good shopping. View detail
Fits: HONDA GB250 Clubman, HONDA VRX400 Roadster, HONDA VT250F/Integra, HONDA Shadow 400, HONDA Shadow 750., HONDA Shadow Slasher 400, HONDA Steed 400, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA Hornet 250, HONDA Hornet 600, HONDA Magna (V-twin Magna), HONDA Magna 750, HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F
"I was charmed by the coolness of the appearance and purchased. It arrived and I attached instantly. However, I felt uncomfortable that I grasped. Although the lever of AREBA was attached until now, this lever missed something. As for the grip feeling, I
"I was charmed by the coolness of the appearance and purchased. It arrived and I attached instantly. However, I felt uncomfortable that I grasped. Although the lever of AREBA was attached until now, this lever missed something. As for the grip feeling, I feel an angle hits strongly and it is not good. When I grasp, it hits immediately the third finger and the little finger which are holding the grip, and it hurts. It seems that it does not suite the form of my hand somehow. Since texture is good, it is regrettable." View detail
It purchased to APEs. Cheap one is this general-purpose Bikini cowl exceptionally in the Bikini cowl. It is with made in overseas [ ], and although it was, since it is cheap, the worries about some are purchased. When the produc
It purchased to APEs.
Cheap one is this general-purpose Bikini cowl exceptionally in the
Bikini cowl.
It is with made in overseas [
], and although it was, since it is cheap, the worries about some are purchased.
When the
products arrive and it unites, the Headlight attached now fits in exactly and is crowded.
Since the position of the hole is however shifted a little, depending on the case, extend a hole, it shifts, or thing smallness processing is required.
The
color suited the color of the car body of its own Motorcycle perfectly.
in the case of, paint application is unnecessary -- it was . [
]
By attaching the
Bikini cowl, a car body becomes tight and it is a little visible to a Race ish.
Please purchase, if it is wavering.
View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125
Compared with a genuine, structure is bad. After rain, waterdrop remains in a lens. However, since the bulb is also attached, it is an acceptable price.
Compared with a genuine, structure is bad. After rain, waterdrop remains in a lens. However, since the bulb is also attached, it is an acceptable price. View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI EX-4, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI KLE400, KAWASAKI KLE400, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400
It attached to ZZR250 instantly. The relation Response and Position of the Clutch at the time of real run could also be set up finely, and I have satisfied them. You are easy to treat the one where the Lever itself is longer (+10~15 mm). Although I ha
It attached to ZZR250 instantly.
The relation Response and Position of the Clutch at the time of
real run could also be set up finely, and I have satisfied them.
You are easy to treat the one where the Lever itself is longer (+10~15 mm). Although I have also said the Design well to mind, doesn't the back become for a while?
pure [ like a Clutch / in brake operation ] in case of the present Reach -- because it is shorter, rather than former, grip will be needed and a Stress will be felt.
View detail
It was good. It is also easy to attach and it is large satisfaction.
It was good.
It is also easy to attach and it is large satisfaction.
View detail
Fits: HONDA GB250 Clubman, HONDA VRX400 Roadster, HONDA VT250F/Integra, HONDA Shadow 400, HONDA Shadow 750., HONDA Shadow Slasher 400, HONDA Steed 400, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA Hornet 250, HONDA Hornet 600, HONDA Magna (V-twin Magna), HONDA Magna 750, HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F
Since lever handling was performed by an index finger and the two middle fingers, and a difference with an exactly sufficient Short lever was adjusted to six steps, the one where a hand is smaller was also able to simplify attachment which becomes good to
Since lever handling was performed by an index finger and the two middle fingers, and a difference with an exactly sufficient Short lever was adjusted to six steps, the one where a hand is smaller was also able to simplify attachment which becomes good touch. View detail
Fits: HONDA Super CUB (Custom), HONDA Super CUB (Custom)
Same as a cub, custom is very dark light, but it was regrettable that there was no external lens, and since it is a low price with the multi-reflector, I purchased as the trial in order to exchange for the cloudy lens. As there is barry and a gap, there
Same as a cub, custom is very dark light, but it was regrettable that there was no external lens, and since it is a low price with the multi-reflector, I purchased as the trial in order to exchange for the cloudy lens. As there is barry and a gap, there is no accuracy of components. However, even if it ignored them, it became bright dramatically, but an optical axis is terriblly upward, so it is regrettable. View detail
Fits: HONDA GB250 Clubman, HONDA VRX400 Roadster, HONDA VT250F/Integra, HONDA Shadow 400, HONDA Shadow 750., HONDA Shadow Slasher 400, HONDA Steed 400, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA Hornet 250, HONDA Hornet 600, HONDA Magna (V-twin Magna), HONDA Magna 750, HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F
It attached to the HONDA xelvis. They are completely dress-up parts. It was shorter than the pure lever, and since far regulation of a lever was also completed, 2 finger control became easy. However, it compared that it was pure and the portio
It attached to the HONDA xelvis.
They are completely dress-up parts.
It was shorter than the pure lever, and since far regulation of a lever was also completed, 2 finger control became easy.
However, it compared that it was pure and the portion which is in contact with the master cylinder is sticking out greatly.
Gatun and a brake came to be effective only by grasping lightly probably for the reason.
If those who are operating it by three in four [ /] from usually use nothing for not knowing, a front lock may be carried out simply.
After changing into this lever, it changed to 3 operation -> 1 operation.
It and a grip feeling may not be so very well.
If it is used empty-handed since it is a thick and square lever, a finger hurts.
since what is necessary is just to carry out a glove, it is not caring, either -- it is more than ?.
considering a price, it is solid, and since appearance is also smart, it can do easily -- custom -- we carry out and it is recommended.
View detail
Although [Webike-monitor] attachment is easy, appearance is also good and a price is also handy, since stay has jumped out that the cap nut which has stopped fiber reinforced plastics brief is unexpected, depending on a vehicle type, it may interfere in a
Although [Webike-monitor] attachment is easy, appearance is also good and a price is also handy, since stay has jumped out that the cap nut which has stopped fiber reinforced plastics brief is unexpected, depending on a vehicle type, it may interfere in a switch box or a lever.
Since it is dangerous if you do not notice the slack of a screw which the cap nut loosened and it has lost one in vibration but a plastic part falls during a run, a measure is required.
View detail
It is used at the time of the company's bikini cowl attachment of a [Webike-monitor] photograph. The washer, the rubber for vibration proof, etc. are a set at a nice condition, and it was not troubled by attachment. I think that they are the good
It is used at the time of the company's bikini cowl attachment of a [Webike-monitor] photograph.
The washer, the rubber for vibration proof, etc. are a set at a nice condition, and it was not troubled by attachment.
I think that they are the good contents of a set in which a hand reaches an itchy place.
View detail
It attached to the maxam. Stay purchased and attached about 100-K general-purpose stay short. Although it is shaky by wind-pressure & vibration, probably, it is such a thing well. Although the protection-against-wind effect was tried to the 15
It attached to the maxam.
Stay purchased and attached about 100-K general-purpose stay short.
Although it is shaky by wind-pressure & vibration, probably, it is such a thing well.
Although the protection-against-wind effect was tried to the 150-K run and the maximum speed of 80 K, its glove for summer was also OK.
I did not think that it was different like this by there is nothing in It is.
View detail
Protection against wind is a design which is made exactly and also is not worried. However, unless it is another and prepares stay by a vehicle type, it cannot attach. Stay will shake fairly by vibration, if harder stay is not prepared. It wil
Protection against wind is a design which is made exactly and also is not worried.
However, unless it is another and prepares stay by a vehicle type, it cannot attach.
Stay will shake fairly by vibration, if harder stay is not prepared.
It will be more effective, if it is another and there are grip litter and an electric heat glove, since it is the touch which delays getting cold.
View detail
Although attached to SR400, very short, by its original work, stay extended by 45 more mm and has attached at last. It is pleasing, without breaking the image of a motorcycle by the design which was felt refreshed unlike the object for off-road one, a
Although attached to SR400, very short, by its original work, stay extended by 45 more mm and has attached at last.
It is pleasing, without breaking the image of a motorcycle by the design which was felt refreshed unlike the object for off-road one, and a cover on which a grip is put entirely.
It will be a cinch, if that the feeling of a fingertip is lost by operation of a winter season decreases and the glove of protection against the cold is collectively used, since the wind of the fingertip which starts a lever exactly is interrupted.
If stay has flexibility more, I will think that four stars are nice by the low price and design of a price, but a saying, even by making stay on one's own person may not be able to do recommendation.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI ZRX400II, KAWASAKI Zephyr X, KAWASAKI barios, KAWASAKI Varios 2, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI ZRX400II, KAWASAKI Zephyr X, KAWASAKI barios, KAWASAKI Varios 2
Since head lamp exchange was carried out, it changed in passing. Compared with the original manufacturer's product, it was touch as kana with thin thickness for a while. Although it attaches with it and was hard to sometimes suit at a case for a w
Since head lamp exchange was carried out, it changed in passing.
Compared with the original manufacturer's product, it was touch as kana with thin thickness for a while.
Although it attaches with it and was hard to sometimes suit at a case for a while, I think that there is no problem in particular.
View detail
although what was necessary was just to have attached ordinarily, there is a meter having no cowl which was attached to NS50F, out of which it was too large and came very much and which was carried out, it comes out, and changes very much -- he is smart -
although what was necessary was just to have attached ordinarily, there is a meter having no cowl which was attached to NS50F, out of which it was too large and came very much and which was carried out, it comes out, and changes very much -- he is smart -- or [ that it was / attachment / easier to also set .. to 150 ] .. View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Estrella RS, KAWASAKI Estrella RS, KAWASAKI Estrella RS, KAWASAKI Estrella., KAWASAKI Estrella., KAWASAKI ZZR600, KAWASAKI ZZR600, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400
Since the lever bent by [Webike-monitor] fall, it purchased to exchange. To grip condition and operation, satisfactorily [ a price is also cheap and ], since the delivery date was also early, it was referred to as *5. Accuracy has come also out of
Since the lever bent by [Webike-monitor] fall, it purchased to exchange.
To grip condition and operation, satisfactorily [ a price is also cheap and ], since the delivery date was also early, it was referred to as *5.
Accuracy has come also out of the hole containing a boss, and the mating part went into the smooth.
Even if attached to vehicles, there were not GATA etc.
Moreover, there were also no defects, such as a bali, a chip, and discoloration.
View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI EX-4, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI KLE400, KAWASAKI KLE400, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400
Although it is comment which attached and use the red of the short lever of MADMAX ... It is the highest when it says at a word. Although I have ridden on GSR400 (ABS), I can also perform attachment satisfactorily and have no problem. Compared wit
Although it is comment which attached and use the red of the short lever of MADMAX ... It is the highest when it says at a word.
Although I have ridden on GSR400 (ABS), I can also perform attachment satisfactorily and have no problem.
Compared with the lever of normal, it is easy to grasp positively, and also when disengaging a clutch, it goes out snappily truly.
The impression of the motorcycle also changed and it is very much satisfied only with exchanging levers.
View detail
Fits: KAWASAKI ESTRELLA [Estrella]., KAWASAKI W400, KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI W650, KAWASAKI ESTRELLA [Estrella]., KAWASAKI W400, KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI W650
This product was discovered, when the left blinker was damaged by [Webike-monitor] fall and the thing cheaper than brand-name parts for repair was looked for. Although it is the difference from an original manufacturer's product, since it is finer tha
This product was discovered, when the left blinker was damaged by [Webike-monitor] fall and the thing cheaper than brand-name parts for repair was looked for.
Although it is the difference from an original manufacturer's product, since it is finer than an original manufacturer's product about 1~2 mm, orange is felt deep for the granularity of the pause eye of XY of an orange cover compared with an original manufacturer's product a little.
Moreover, about a thread part, since the form of a mountain is flatter than the screw thread of an original manufacturer's product, unless it uses an attached spring washer and nut, it does not cling.
Since the flanged nut of an original manufacturer's product cannot be used for this product, the direction which only one side exchanges cannot unify a fastening part by right and left.
On the function, satisfactorily, since a color was not worried at all, either, and the difference in a nut also hid in the back side of a blinker mounting bracket and I was satisfactory, I was set to *5.
View detail