Reviews
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Beautiful nuts
I bought these nuts on the Honda SuperCub and Monkey - they fit both motorcycles. They are not expensive, but they protect the screw from harmful influences from below. The quality is good. I bought these nuts for a Honda SuperCub and Monkey - they fit both motorcycles. They are not expensive, but they protect the screw from harmful influences from below. The quality is good. View detail
Fits: Others NS1:NSR50:TZr50R:TZM50R:RZ50:MONKEY 12V:GORILLA:APE50:APE100:TW:SR400:SR500 etc
Colorful and Beauty.
[How is it used?
I purchased this product along with a plug replacement because the Engine was not working properly.
Was the one you received as per Image?
It was softer Material than Image.
Was the installation difficult?
Simply replace with OEM Plug cord & Cap.
How was your experience with it?
I am not sure about the functionality of the engine, the startability of the engine was not different and I could not feel any difference.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
The functionality did not change, but the appearance became Beauty.
▼I might be able to tell the difference if the body is an older year, but I couldn't really tell.
View detail
Firmly usable
[How is it used?
I used it when I changed the Silencer on my YAMAHA XJR400R from MotoGEARΦ100 to K2tecΦ86.
The Φ14 thinner Silencer band is now farther away and cannot be handled by the existing Bolt.
We measured the amount of gap and decided to put aluminum collars on the rear suspension and silencer band side to fix them in place.
How was your experience with it?
The measurements were perfect and firmly fixed.
I have also done a good job of Torque management, so I don't think there will be any problems.
How did it compare to other products?
This time I bought 80mm and 50mm.
Home center also sells Bolt, but basically they don't sell P1.25, so you have to buy it at motorcycle supply stores or on the webike.
I think it's good
[Points to note]
Aluminum is surprisingly soft.
Be careful when working with Overtorque, as it can easily be severed when tightened with Overtorque.
View detail
pochPlug cord
Used on a Uotani Coil. Perfectly sized and installed with no problems. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
High Class Accent!
These Posh 24K bolts are small bits of quiet elegance, like fine jewelry. I am very impressed by the presentation! The price is a bargain! My Web!ke Japan feedback is 100% for product quality, speed of order processing and shipment. Keep up the great work friends! View detail
It has a sense of luxury.
Installed on PCX160.
It is quite luxurious.
Reflector is also satisfactory with good design.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
It can be used for CD90!
[How is it used?
The shape changed and hardened over time, leading to the purchase of a new one.
How was your experience with it?
Elasticity returns and Oil does not drip.
You can operate the system without worrying about leakage.
How did it compare to other products?
OEM Parts is slightly cheaper, but I was in a hurry.
That said, the price difference is within the margin of error, so you should purchase according to Timing such as Sale.
[Points to note]
Material when exposed outdoors for years.:Deterioration is inevitable because of Rubber products.
Recommendation for periodic replacement.
O-rings, which are not oil-resistant, are sold at home centers as water supply packing, but dedicated products are safer and more secure.
View detail
Buy with brake lever set change
The finish looks good and I'm satisfied with the design I want Recommended as a mirror hole replacement when changing the genuine front brake set View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA XR50 Motard, HONDA XR100 Motard, HONDA Ape 100, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard, HONDA Ape 100, HONDA Ape 50
first-time entrant
I replaced it because the Engine suddenly stopped working and I felt the spark was weak. It looks good and is a good product. View detail
Fits: HONDA SUPER CUB 110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB 110
Change rodSupport
There was also an Installation Instruction Manual, so I think this is a friendly product. It took about 20 minutes to complete the work.
My impression of its use is not good.
There is a sense of being able to firmly Shift change.
I think it could be a little cheaper.
View detail
Protection of SR400 License Plate.
I feel that the License Plate does not shake so much when idling. Also, I feel that the License Plate Holder and the License Plate are firmly fixed. View detail
Posh Terminal nut Item number:800024
The old Plug always came with a terminal nut, but that has since disappeared.
I recently had difficulty starting the engine, and after inspecting each part, I noticed that the terminal nut was missing, so I decided to purchase it this time.
View detail
Stainless black
The Flat Washer is also stainless black along with the Fixing Screw in stainless black.
It looks nice, but this price for two pieces is ….
I wish it was cheaper.
View detail
Black
The Black bracket and Silver Fixing Screw stand out, so I bought it to unify them with Black.
Stainless Steel's Black, I couldn't find a place near me that had it, so it was a great help.
View detail
Stainless Steel Fixation
Fixing Screw to be rust resistantMaterial:Replacement with Stainless Steel.
It helps that I can choose the Size I want.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
no problem
CB223S is not in the list of compatible models but can be used.
I chose it for dress-up as well, since the original Nut had left on its journey after forgetting to fasten the main fastener.
I think it is overpriced for something that is hard to see.
View detail
Fits: HONDA NSR80, HONDA NSR50
Coil and cord in one piece
Coil and cord are integrated into one unit, reducing the risk of poor contact during installation.
Note that the Plug to be used is the one with Terminal, so if the original is Screw Type, the Plug cannot be used.
The Coil side has the same shape as the NORMAL, so there was no confusion in installation.
View detail
impulsive buying
I saw it on social networking sites and thought it would be a good product to personalize Motorcycle.
We considered other Manufacturer's products, but because there were many users of this product, we purchased this one.
Spec. to be sandwiched in a circular Acrylic, so depending on the Ideas, it can be personalized with various Materials and Designs.
View detail
easy manual cruise control
I have used many type of throttle assist but most of them are not fixed when I turn the throttle on a long journey, especially when it rains. I installed CF Posh throttle assist on Suzuki V-strom 1000 (and now on Ducati SF), it can fasten to the throttle grip so I feel very comfortable during long journeys. View detail
Fits: YAMAHA TZR50, HONDA NSR250, YAMAHA XJR400, YAMAHA RZ50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NSR50, HONDA CB400SF, HONDA NS-1
Easier to adjust.
I bought it because I thought it would be easier to adjust by making the Screw part larger.
Satisfied with the results, as they are easier to adjust.
View detail