Reviews
surprisingly easy to drink
It's a very nice cup. View detail
It looks and sounds great!
It was installed to the Full Exhaust System of beet, it is a pretty good sound. The high-pitched sound when the Axel is opened is the best. View detail
Good!
Motorcycle riders will love this product. I don't need to tell you how beautiful it looks. "For racing use only. It's nice to play around with things like that! It's a bit pricey, but I think it's a one-of-a-kind product, so if you're curious, go for it! View detail
This is great
We've seen a lot of different Rear Sets
The rear brake hardness adjustment is the best
Position is fine for me and I'm glad I bought it
is Thank you very much
View detail
Great looks and performance
I installed it on my Z900RS Cafer
Full Exhaust of Earls GearWyvern classicR SystemSilencer
MV83 Titaniumium Silencer/I replaced it with a Slash Cut 300?
Wyvern Exhaust System is quieter than NORMAL Exhaust Because it is a system, I changed it to make a little presence
The length is almost the same as the Wyvern, but it is much lighter and slimmer and Stylish
The volume at the time of Idling has not changed much from Wyvern Full Exhaust System It was a nice miscalculation
I appreciate that I don't have to worry about it when running warm
Of course, if you twist the Axel, you can hear the sensual sound quality
The exhaust system of super light weight and the construction is the same as Wyvern, etc
Sound Quality:The sound quality is quite good, and the only way to describe the sound is as good as Maverick
Volume:20-30% more (no change in Idling)
Torque feel:Improved high-revving extension, even at low speeds
It's a great exhaust system with the volume and sound quality you're after
View detail
I'm glad I bought it (*^^*)
Not only does it look and feel different, but you can feel the difference as soon as you get on the car (a change that even I am insensitive to) I'm glad I bought it (which is lol)! is (*^^*)
I'm not sure if the durability is unknown because I just started using it, so I'm not sure how it will feel I'm not sure if it's a good idea, but it's a good idea
to install to r750, you need to change the way the reservoir hose is handled, but you don't need any other parts It is easy to install
View detail
Rear Sets also have performance
For me, the requirements were as follows
Pass the inspection
Adjustment function of return spring is available
You can use a NORMAL Mechanical Type Brake Switch (The Hydraulic Sensor I used in the past was not as reliable as it should be)
Rear Sets have been released by various manufacturers, but the above This is the one that meets and parenthesis is good The texture is great
Since the position of Master Cylinder is above NORMAL, in my case it is 50 I had to replace it with a brake hose that was 2.5mm longer
View detail
Large satisfied
I've had it on for about 2,000km and it started to sound great
It wasn't monotonous at first, but I recommend WITHOUT Baffle!
View detail
It's slim and stylish
What made you decide to buy?
Carbon silencer and slim profile
I wanted a Slash End Silencer
I bought it because I thought that Maverick would be large and sturdy in quality
How was your experience with it?
First of all, it looks great!
Silencer band is also included without using the Included Parts:collar It was Exactly
The sound quality is … it's a blast (laughs)
There are no Baffle holes at the end, and STREET may require some countermeasures …
Was the installation difficult?
Just plug it in and install the spring
[Was there anything that disappointed you?
The sound is Large
Do you have any wishes or improvements you would like to make for the Manufacturer?
I wish there was a quieter Silencer that looks the same but is a bit quieter
Well, you can't, but …
[Do you have any products to compare it to?
Choose Maverick!
View detail
It looks and performs brilliant!
I didn't want to be plain on my feet, and I didn't want to look like other people, so I chose Gold alumite to make my feet Glaringly
Because the shift change can be done easily, I like Large change But I can't install the FootBrake one well at first, so I have to wait a little longer I thought it would be nice if the Instruction Manual was carefully written, NORMAL When I put it on, I had a hard time removing the bolt from the rear master, so I put the Spanner of 11? It's good to be prepared It would be nice if the prices were a little lower
View detail
Satisfied with the beauty of the design and sound quality
I bought it to install it on my CB1300SB
i was using Slip-on Silencer of techserfu, but I was a little dissatisfied with the volume I was confused with the MV97, but I decided on the MV83 because it was closer to my desired volume
Exhaust pipe is raised for techserfu, Pushing for CB1300SB We are diverting Spec
Silencer is a little slender, but it's nice in Race ish
Best of all, the beauty and sound quality of the welds is outstanding!
The only drawback is that it doesn't come with a heat-resistant sticker
View detail
Straight exhaust, but not too loud!
This exhaust system is not JMCA, but as I explained, it's 99dB, so it's not a JMCA system Compared to Manufacturer's Slip-on Silencer, it's much quieter and more vulgar The exhaust pipe doesn't have any burned out color at first I turned it with a chassis die and it got the color The color of the exit is good from the beginning
Installation Bolt (Tandem Footpeg side) was too short, so I changed to a different length of Bolt
View detail
I'm glad I bought it
Full Exhaust System Japanese Vehicle Inspection I have a Correspondence exhaust system installed and I can't help but notice the sound Not enough to buy it The sound is now Race ish, not a nice blast, direct to the Manufacturer When I asked for an explanation, it was also Large strange and kind View detail
Baked color beautiful
I love it with a rather Race ish sound with installation without Baffle from Full exhaust titanium of Wyvern.
Easy to install BandQuantity : It can be installed if 2 pc and Nut are removed.. early morning ? Midnight launch ? I will care about returning.
View detail
Cool!
Anyway, it is cool.
There is also a sense of luxury, unlike cheap Silencer.
There are many cheap similarities, but they are different things.
Recommendation!
View detail
I am not honest
Mounting on '99 GSX 1300R.
It is an absolute evaluation rather than a relative evaluation because of the first Rear Sets.
* Design seems to be different from Large. Below is the contents of Initial Model GSX 1300 R HAYABUSA.
【Mounting, accuracy】
Because Brake switch is diverted from OEM, Brake line does not have to touch.
However, as there is little explanation about the installation, I think that it will be difficult if you do not understand the structure around footpeg accordingly.
It would be better if you do not have confidence to partner with Fee Ring, leave it to the store.
Although it was packed in the temporary assembled state, since it is really temporary set, it is essential for all Bolt to be properly tightened with Torque.
Regulation Torque was instructed by kg of M6, M8 respectively. I think that it is surely kgf ? m.
Since FootpegMounting Bolt is arranged deeply, when using Torque wrench for retightening, it is long (There are about 100 mm) Type or Ball point 6 mm Hexagonal is required.
After that Ikechi if you have a basic tool, but be careful as Bolt's head of Large half is shallow and it's shallow taste.
Spec. As you can see, OEMPosition is not set.
For the time being, we attempted to install to Position which is closest to OEM, and it interfered with Exhaust pipe with Brake pedalFull stroke.
Since my exhaust system is changing for my vehicle, I can not do this.
According to Instruction Manual, it is confirmed that OEMExhaust pipe and Maverick's exhaust system will not interfere.
Although Left Side does not also interfere, Side Stand and Change Pedal are too close and legs hit when SHIFT UP, so personally NG. Does this depend on the physique?
The most severe Position (Up & down) change to. Quantity : Pair (for Left and Right) And the interference is like Limit Safe. In my case the Change Pedal side has lowered to the limit of the range of adjustment so it may not bring the Pedal position to the best depending on the physique and preferences.
Although it is not limited to this Rear Sets, as changing the position of footpeg changes reservoir Hose of RearBrake master cylinder becomes painful Routing, so adjust the position of reservoir tank with appropriate Bracket, change Hose etc. We need to devise.
【Quality / texture】
Although there were scratches to the extent that you did not know well if you did not see it well, packaging was polite and reached in Beauty state.
Firmly textured with Aluminum Cut-out.
I chose Gold, but there was no color unevenness, etc..
【Performance / Function】
As feeling of Shift, feeling of moderation increased. The power to step in to that extent became necessary, but is this neighborhood a matter of taste?.
Personally it was okay because I felt it was not good for OEMPedal's moderation of moderation.
However, as I wrote above, it is not possible to choose only real 1-position due to interference.
Personally fatal is that Heel plate is too low and you can not hold the car body with the heel - ankle when the toes are placed on the footpeg. I hear that "the rigidity around the footpeg has improved with Rear Sets", but it is a thought that it is impossible for me to stop pressing even if the rigidity rises.
[Feeling of use]
Fortunately the toughest Position (Up & down) So there was no sense of incongruity so there was no problem as Position.
, But as I ride with the basic toe on the footpeg, Heel plate was fatal.
【Cost performance】
Slightly higher pricing as Aluminum Cut-out's Rear Sets Kit.
The texture was expensive and packaging was also polite, but considering the simplicity of the Instruction Manual and its functional aspects, it is painful to say that COSPA is good.
【Review】
It is a real 1-position for a high price, a deadly form Heel plate.
As a personal opinion, I can not help saying that Ike is only an appearance.
Heel plate is under consideration in the direction of making it yourself.
View detail
I'm sorry
Just because it is a very expensive shopping
It was a very disappointing result.
Also, to Silencer
Heat-resistant sticker to paste also
It is reflected in the image
It was not included.
I think that you should describe the item description in detail.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
View detail
love at first sight.
I received today. I bought it for reward to myself who worked hard for one year. I opened the packing box, it came out! Blue that is peculiar to Titanium !! Cool is it ~ I will fall in love (^^) I feel the real thing is Smaller than the image but as myself as Coffee cup View detail
In use at CB1300SB
I use it in combination with Wyvern's Full Exhaust System.
I previously owned MV 83's Titanium L 300, but if I did not insert an Exhaust Baffle, (Lol)
As a result, I sold it in a certain Oakon, and bought it from this site.
I bought L400 Carbon, but this is a rather modest volume and I think that Large is durable without using Exhaust Baffle.
Later on, making details is good.
However, the price (Lol)
View detail
Looks, sounds, is the best.
Currently I am on the 2014 GSX 1300 R HAYABUSA.
I think that I will write about exchange work, sound, appearance, performance, price by saying Impression.
First of all, I installed Maverick Mv - 1 Carbon Heat made by CraftArmadillo this time.
Silencer end SC is Standard and SC (Slash cut) Although it was only 2P was good, so I made it with Order Maid. (No additional charges generated)
Before exchanging for Maverick, we have Wyvern 's Slip - on Silencer Twin Silencer and Tail Pipe is diverted as it is. Silencer Only I exchanged.
"Clearing work"
By saying Silencer Only, I can remove Spring and Band and attach it, even with Twin silencer
With 30 minutes I was able to exchange with a margin. The insertion diameter is φ60. 5 with good accuracy, liquid Gasketetc. Although it did not apply, it was able to be installed without exhaust leakage.
"sound"
It becomes a dry sound compared to Wyvern and it sounds like Race ish. The volume was also quite up, but it was never a straight tube,
Just by listening to exhaust sounds, the fun of Touring is 1. It will increase 5 times.
However, when warming up in a residential area it may be a little worried.
Wyvern sounded heavy bass, and indeed "I'm on a 1300 cc Motorcycle. Although it was the feeling that it was Race ish and becoming a dry sound
I feel like riding in the SS of 1000ccClass.
"Appearance"
I feel that the burning color of Titanium is beautiful, the welding is polite and I can not complain.
It is attached to the top "MAVERICK" TitaniumPlate with Logo is a gold luxury impression, it is not noticeable but it is a favorite point.
By shortening and shortening, the Silhouette of GSX 1300 R HAYABUSA became quite compact.
"Performance"
Compared to Wyvern which was Torque fully when opening Axel in the Idling state, it seems that a little downward became thinner.
I do not care enough to start running. Because GSX 1300 R HAYABUSA is not Circuit and for Japan FOR JAPAN MODEL can hardly turn it
I think that it was good to be able to turn.
"price"
Quantity : 2pc purchase and 100,000 yen. It is not cheap shopping by any means. Before purchase "Is this Small Silencer doing 1 pc 500 th?" I thought that
Actually installed, I changed my appearance and listened to the sound and convinced the price of 100,000 yen.
"Others"
Lightweight is what made me happy miscalculation. OEMExhaust System is Quantity : Approximately 20 kg at 2 pc. About 7 kg Wyvern. About 1 Maverick. 2kg.
It was about 6 kg lighter from Wyvern, but I felt it was light even from the low speed of the city ride.
It seems that the pass will run quite nice comfortably with this exhaust sound at this.
Included Parts : In Maverick (Non heat resistance) Seal has arrived.
"Finally"
Sometimes it was Large shopping in myself, and I was carefully scrutinizing before purchasing.
When you call CraftArmadillo by phone on a place you do not know by simply including information published by Wei Big
I corresponded politely. Also, as Maverick purchased this time was an Order Made, it was said that it takes one month for delivery when ordering
It was created in about 3 weeks.
Not only the quality but also the correspondence is good, I feel that I was able to do a good shopping as a purchasing side.
There are many Universal Silencers made by other companies, but I think that it is definitely No. 1.
Again, sound, appearance, is the best. I want to go to Touring soon ~.
View detail