Reviews
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI Z1
Bargain Edition of Utsumi Industrial Laydown Kit
Quantity : Pair (for Left and Right) There are subtle distortions and gaps in the production, but it is not a tolerance that affects the operation. However, depending on the shape of the Suspension to be installed, it is necessary to shorten it short as it contacts the top of the suspension head when pulling down Seat CatchLever. Also, the actual material is Stainless Steel's Material : Although it is Polishing, I think that wearing assimilated into Frame is possible with almost no sense of incongruity if painted on Black.
View detail
Because it was cheap.
Purchased as Meter Bulb.
Because I was cheap I tried to buy it while thinking that it would be unavoidable to draw Hapap.
When used it properly shined the light intensity.
View detail
Fits: HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA GL1200 Aspencade, HONDA GL1200 Aspencade, HONDA CB400TII CB400T, HONDA CB400TII CB400T, HONDA CB400TII CB400T, HONDA GL1100GOLD WING, HONDA GL1100GOLD WING, HONDA GL1100GOLD WING, HONDA CH150 D, HONDA CH150
Fast Shipping. The item is in a very good looking. However, You need to check fitment before use. Also, Your carburetor type and version is also important. The product has very low price but useful to replace the old one which worn out.
Fast Shipping. The item is in a very good looking. However, You need to check fitment before use. Also, Your carburetor type and version is also important. The product has very low price but useful to replace the old one which worn out. View detail
Fits: KAWASAKI Ninja 650, YAMAHA DT200WR, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA YZF750SP, KAWASAKI Ninja 650, YAMAHA DT200R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA XJR400R, YAMAHA YZF600 THUNDER CAT, YAMAHA YZF600 THUNDER CAT, KAWASAKI KDX180 80-93, KAWASAKI KDX180 R 80-93, KAWASAKI KDX180 SR 80-93
Fork oil - Dust - Oil seal exchange
Dust Seal had cracks and tried to buy it
Quickly Dust - Oil seal exchange.
I put an Oil but because there was a leak of Oil from Right Side, I will rebuild but it will not get over it!
Compared to the one attached first, a little newer was Gusugusu.
So after assembling the Oil seal which was attached first, OK after installation
After that, I tried running, but there is no leakage of Oil, but the opposite Left Side is a little like Oil is blurred between Dust Seal and Fork.
After all, I regret that I should have made OEM a little more expensive.
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
It is the second purchase.
【What made you decide the purchase?】 Required item
Of course, the price.
【How was it actually used?】 Required item
I bought it before, but since it was no problem purchase for the second time
【Was it difficult to install? (Hard parts case)】 Any item
Since it is Ring-shaped, if it is not fixed with liquid Gasket, it can not fall and can not be installed.
Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 Any item [Is there anything I was disappointed about?] Required item
Nothing else.
【Hope for Manufacturer - Please let me know if there are any improvement points] Required item
I want the shape to have a more flat surface. Then I feel like I will not lose to other Manufacturers.
[Others] Any item
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, Others CRcarburetor, Others FCR Carburetor Bodycarburetor
When Fuel Hose gets harder - - -.
Buy for my GSX-R Restore. Fuel Hose was pretty hardened. Hose purchased is very soft and easy to handle. Moreover, it is inexpensive! View detail
Fits: KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI XANTHUS, KAWASAKI ZXR250R, KAWASAKI ZXR400R, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZZR400
If it chooses by price, this is it.
It is the second purchase.. If you choose by price, this is it, but try using it, I will give you a problem. It is good if it is first, but once it is used it will deform slightly and its fit will be worse. It takes time to replace the main jet with the carburetor's setting, because the fitting gets extremely bad.
My motorcycle may be due to DDcarburetor, but it is a struggle. I do not know because I never used the OEM Product, but perhaps the OEM may not be deformed so much. However, since the price is three times, I will leave it to him to buy either.
If you do not want to spend your time, I think that you can purchase a new item and use it. If it fits nicely, I think Gasoline leakage is 100 percent.
View detail
More than I thought - - - -
1 pc of FX. I used it for Valve but it is brighter than I thought. I attached it to Clear tail with Red LED Bulb. I think that it is not much different from OEMClear tail LED of passenger car. Since it is an LED, there is no worry about the color balance of Valve. Will it be durable after that?. View detail
It is surprisingly good Parts
I bought Bump rubber and tried it because I found this item as I was concerned. Although there is some roughness in the finish, I think that the worst case can be avoided just by wearing this Bump rubber by any chance. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, Others CRcarburetor, Others FCR Carburetor Bodycarburetor
Anti-durability
Impression that there is no mortality rather than flexibility at the moment of picking up.
If even a little force is applied by handling it will be deformed and folded immediately so that supply of Gasoline will be hindered.
It is too soft and easy to wound on the surface.
The disadvantage of heavy Large is hardened in 2 weeks of installation and it becomes Cha Chi Chi.
Certainly Engine's fever may have been transmitted but it is too durable.
Moreover, since the attachment part is still in a fluffy state, just by shaking a cured Hose a little,.
As it is, there is no doubt that it will cause Gasoline leakage, so I immediately changed it to another company's Hose.
You can not use Hose which will be useless in two weeks.
View detail
CHERRYCherry Universal Reflector Plate
This CHERRYCherry Universal Reflector Plate was a very inexpensive product to the extent of Big Ri so we had a little doubt, but when we look at the actual thing received at hand, it was a normal Universal Reflector.
Since it is Universal, it can not be installed unless you devise a bit of ingenuity. It's natural because it's not exclusive.
There was nothing to attach this CHERRYCherry Universal Reflector Plate to CRONOF 250 L of my ride HONDA, but somehow I wore a deck and round Orange Reflector reminiscent of the old old car of this CHERRYCherry Universal Reflector Plate Because I wanted it, I tried installing it somehow.
This CHERRYCherry Universal Reflector Plate is a cheap product as it is Big Ri so even if it is forcibly broken, the Shock Wound is Small so it was a reasonable place to install it.
If it was an expensive product, I would not be gambling to forcibly install it because it would be bad if it breaks, so I think that it was impossible to install the result.
It is a typical example in which a difference in whether it can be installed or not can be borne only by the difference in price.
This 100 yen Reflector is truly vulnerable so Reflector can be easily removed from Base.
After the Reflector was disconnected, the Aluminum foilSeal was pasted on the inner surface, and then repaired with Reellector and Base with Gel-like instantaneous adhesive, but it could be confirmed to be more than the reflex ability of expensive Reflector made by another company It began to reflect light around.
As you can see, this CHERRYCherry Universal Reflector Plate, which is 100 yen free to play without fear, is my good Toy (Lol)
In fact, it is implicitly installed in the Frame of an off-road car, but without any sense of incongruity, it seems like an OEM Reflector attached from the beginning.
Make this CHERRYCherry Universal Reflector Plate Motorcycle Quantity : Pair (for Left and Right) Once installed in the Frame on the side, although it may be my preconceptions in the atmosphere, it seems that it became a little old image of the old car as well, so I'm pleased with Large satisfaction.
When installing this decorating and round Orange color CHERRYCherry Universal Reflector Plate, it becomes a slow image, but since it is not actually a heavy weight, it does not affect the running at all.
.
View detail
Fits: KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI Z400GP
cheap
We also exchanged Gasket at the time of replacing the BEET's point cover.
I have ordered this price as well as OEM and arrived the next day.
Large I'm satisfied..
View detail
Fits: HONDA CB650, HONDA CB750F, HONDA CB900, HONDA CB1100F
CB750F FC
I bought it for CB 750 F FC.
Since there was Gasoline bleeding from the Float room, I exchanged 4 pieces.
Although bleeding stopped, is it a little hard to install?
Although the shape is the same, it is a feeling that this will come off if you put in someone because Rubber has some slight deformity.
For that reason, we stopped and installed it with 4 instant adhesives.
Durability is unknown because it replaced everything with Overhaul kit after a few months..
View detail
Choose Blinker
"WEBIKE MODE WE Big MODE : WM-01-006 Small Blinker (1 Set of 2pcs. ) "And purchased at the same time purchased.
Although others are also written, it is unfortunately not processed and it was necessary to cut off the interference part of Blinker lens.
The amount of light is sufficient and is comparable to Halogen, before and after Quantity : Pair (for Left and Right) You can see from anywhere.
Reliring is Wiringetc. Because it is not attached, Harness processing to some extent is necessary for installation.
In the dimension table, it looks like the Halogen sphere and the same as Large Kimono,
Actually it is not a sphere, there is no space on the shoulder part of Valve.
In the Small Type Blinker, it seems that it interferes here because there is a part through which the Lens attachment Screw is passed using the round part of the spherical valve.
So, I think that it is better that the diameter of the Lens is large and 20 mm or more is opened between the Lens attachment Screw and it is actually better to have a space of about 25 mm.
I think that it is quite excellent for Cost performance that Blinker can be made full LED at this price.
View detail
Position is good only ...
I thought about exchanging from Separate handle to Bar handle, "Low and narrow" Based on the theme, HURRICANE's Continental handle type 2, Fana TEC's LOW bar and suffering, I decided this Handlebar.
The real thing was glossy like the picture, somewhat cheesy, Knurl processing was sloppy, it was a suitable substitute for the price. Even after installation, the Switch box was spinning around its parts precision (Switchboard's Petch is completely bad I myself ...)
It is a bit disappointing that the shape of the bar is almost ideal.
View detail
CHERRYCherry Universal Reflector Plate
【What made you decide the purchase?】
If you are looking for Reflector that is Retro ticky Orange color and Large Kind Round Type, I found this CHERRYUniversalReflectorReflector.
Besides, it is 1 pc indeed. I jumped without thinking backwards cheaply saying 100 yen. (Quantity : 2pc. Set purchase)
【How was it actually used?】
It was indeed a cheap product, so the adhesion between the resin parts was fragile and it was broken down quickly, but since it was easy to disassemble it to Beauty, reassemble it firmly by yourself with high strength adhesive and fix it to Motorcycle Frame I installed it..
【Mounting was difficult?】
Nut comes with M5 Screw as the axis, so it was easy to install it on the Motorcycle using it.
【Please tell me the installation point and hang】
Before installation, it is a product that is easy to disassemble as mentioned above, so decompose once with his own hands before dropping parts by dropping it, then reflect the interior to AluminumSeal and then bond with high strength It is a product that can customize by taking advantage of weak adhesive strength and easy to disassembly weakens because Reflector ability will dramatically increase Reflector ability when reassembled with agent.
[Is there anything I was disappointed about?]
At first, when it was disassembled, it was closed to the bonding assembly of parts that were too fragile, but it was cheap 100 yen so I forgave it.
However, thanks to that, Customization was done. I am lucky..
【Hope for Manufacturer - Please let me know if you have any improvement points]
Although it is a strange story, maintain the characteristics and inexpensive prices that can be disassembled as they are. Please.
【Have you compared items?】
Because it is a Reflector product with too high Cost performance and customization, there are no products that can be compared elsewhere.
[Others]
It is not a product that is said to be cheap and bad.
For those who can decompose and paste Aluminum Reflective Seal on your inner surface and reassemble it, I think that it is a very delicious product.
This ReflectorReflector is not something to attach to Motorcycle a lot, so no matter how cheap it is I will not buy anymore (I do not need it) However, by all means it is a product I would like to recommend to everyone.
.
View detail
It is cheap, there will be no problem
Compared with KEIHINOEM, COSPA is good, and delivered goods can be used without problems.
I bought it for bulk as it is a part that is easy to lose well and easily lose.
View detail
I thought it was removing from the accident car.
I will place a picture but the part turning Dial was elliptical like it was crushed by something. In addition, taking BALI is too sweet, I think that Clutch Cable will definitely be full of fancy if used as it is. I will not feel like attaching it as expected, so I plan to discard it as it is.
Although I was expecting it, I am very sorry..
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPz400F/F2, KAWASAKI GPZ400R, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI D-TRACKER, KAWASAKI ZRX1200, KAWASAKI 250TR, KAWASAKI ZRX1100
CVK Carburetor setting
I bought 4 pieces for my car ZEPHYR 750 Carburetor setting. 1pc. At the time it reached it was deformed and there was something like Wound and I noticed it after decomposing carburetor, so I used it for the time being, but Gasoline got stained and got stuck out. Although there were no other three problems, I think that it is a good product if it becomes possible to use it with confidence, such as making strict inspections a little more.
Packingetc. With this type of product, it seems that there is a win / loss, it can not be said to be a reliable item and even if the price is cheap it can not be used with confidence. Considering the trouble of disassembling the carburetor many times, it may be better to use the OEM Product?! I hope the quality will be improved in the future.
View detail
Fits: KAWASAKI Ninja 650, YAMAHA DT200WR, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA YZF750SP, KAWASAKI Ninja 650, YAMAHA DT200R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA XJR400R, YAMAHA YZF600 THUNDER CAT, YAMAHA YZF600 THUNDER CAT, KAWASAKI KDX180 80-93, KAWASAKI KDX180 R 80-93, KAWASAKI KDX180 SR 80-93
cheap
I am happy to be very cheap and easy to purchase.
Moreover, it can be used normally without trouble for now.
However, Dust Boots is 1 pc. I was dissatisfied that it arrived in the state of shortage. Since it is Dust Boots, I reused what I was using before but I want you to be careful not to have this kind of thing in the future.
View detail