Reviews
Difficult to use
The zipper can only be closed from the bottom, so it's hard to close when you're in a hurry, and the opening at the hem can't be adjusted, so if you have a wide seat, it's hard to open the crotch and you'll feel like you're going to fall.
Also, when closing the zipper, the cloth for waterproof is caught and very difficult to close.
I was hoping for at least a Zipper with both top and bottom closures.
View detail
Fits: YAMAHA jog, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA shirley, HONDA pal, SUZUKI GAG, HONDA monkey, SUZUKI Choinori, YAMAHA mint, YAMAHA champ, YAMAHA YSR50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA shirley, HONDA pal, SUZUKI GAG, HONDA monkey, SUZUKI Choinori, YAMAHA mint, YAMAHA champ, YAMAHA YSR50
It's good enough for my use.
This is for MONKEY50 that I got from my friend. I have a roof in my garage, but I bought it because my rear suspension started to rust due to the wind and rain blowing in from the side. The price is reasonable for PelePeraCover, but it is enough for my usage. I use a thicker one for my MainMotorcycle. View detail
Fits: YAMAHA X-MAX, KAWASAKI W800 Street, SUZUKI Bam Bam 200, SUZUKI Glass Tracker BB, SUZUKI glass tracker, SUZUKI Vstrom 250, KAWASAKI ZRX400, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI KX 85 II, KAWASAKI KX 85, KAWASAKI KX 65, KAWASAKI 250TR, KAWASAKI supersherpa, KAWASAKI D-Tracker 125X, KAWASAKI D-Tracker 125, KAWASAKI KDX 250, KAWASAKI KDX 220, KAWASAKI KLX SR, KAWASAKI KDX 200
It's well made
This is a cosy Cover. Although the fabric is also firm.
I think it would be tough to park without a roof.
It is for parking with a roof, without an exterior wall, etc. Since it is a Cover, it is necessary to prevent moisture.
View detail
Fits: HONDA Johno., HONDA Tact System, HONDA dunk, HONDA Dio System, HONDA Today, SUZUKI Sepia system, SUZUKI GS50, SUZUKI Sepia ZZ series, SUZUKI Let's system, YAMAHA Aprio system, YAMAHA Jog System, YAMAHA Vino series, HONDA Johno., HONDA Tact System, HONDA dunk, HONDA Dio System, HONDA Today, SUZUKI Sepia system, SUZUKI GS50, SUZUKI Sepia ZZ series
It's a little too good for the DAX...
[How is it used?
This is for outdoor and covered bicycle parking.
Was the one you received as per Image?
Unlike cheaper motorcycle covers, the fabric is thick enough to give you a premium feel for the price.
How was your experience with it?
It is flexible and easy to cover.
I have a pre-basket on my DAX, but there is some room around the handlebar.
Fit.
The height around the rear is a little short for DAX.
In terms of overall size. "S" is Exactly, but it's not a good idea to use the "M" seemed to fit.
[Points to note]
Although there is a little bit of floating around the Rear, it is used by squeezing firmly with the draw cord.
It seems to help you deal with things like blisters by
How did it compare to other products?
I've been using a variety of things, such as Cover, which I bought from DAYTONA and 0mazon, but
I think the thickness and flexibility of the fabric is the best.
Front and rear handles? I like how easy it is to get the cover by pulling the
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
For GPZ900R I liked the REIT cover I bought for my GPZ900R, so I bought the same manufacturer's one for the DAX.
If possible, it would be great if you could sell not only silver, but also black and other colors.
View detail
Fits: YAMAHA Axis 90, YAMAHA Jog (Met Inn), YAMAHA Axis 50, YAMAHA VINO, YAMAHA TZM50 R, YAMAHA RZ50, YAMAHA BJ, SUZUKI Let's Series, SUZUKI Sepia Series, SUZUKI Address V50, HONDA schoolyard, HONDA Johno., HONDA TODAY, HONDA NSR80, HONDA NSR50, HONDA DIO Series, YAMAHA Axis 90, YAMAHA Jog (Met Inn), YAMAHA Axis 50, YAMAHA VINO
Use for now.
I chose this inexpensive product because I was going to be storing the vehicle outside for now.
I'm not looking for any particular performance as I use it for mopeds.
I think the product is worth the price.
The water and heat resistance is not strong, but if you don't mind, it can be used normally.
I don't know the durability of this product because I've been using it for about a month, but I'm hoping to keep it for about a year.
View detail
It's a must for Motorcycle maintenance work!
I use these Nitrile gloves because my hands often get dirty with oil when I do maintenance work on my motorcycle.
There is no powder, so it is easy to use and sufficient for your needs.
It comes in a pack of 100 sheets, so you can use GunGunGun.
View detail
It is thin and easy to use.
It's thin enough to use for motorcycle maintenance without being a hindrance.
Material is strong and won't tear for normal use.
It comes in a pack of 100 sheets so you can use GunGunGun.
Cost performance is good
View detail
It sucks
I bought it last September, but I never got a chance to use it, and the months have gone by unopened as I bought it.
When I finally got a chance to use them, I opened the package for the first time, and they were both on the Right Side.
If it had been immediately after I bought it, I would have been able to return it for an exchange due to the manufacturer's deficiency, but 10 months have passed since I bought it, so I'm frustrated, but I'm crying myself to sleep. From now on, I promised myself that I would always check the product immediately after purchase.
We-Big is not at fault, it's the manufacturer's responsibility.
View detail
Useful for maintenance work!
The oil on my hands during maintenance work on my motorcycle caused a large amount of damage to my hands. It was.
These Nitrile gloves will keep your hands clean.
It's very thin, so it didn't compromise my workability.
It is useful for maintenance work.
View detail
For daily maintenance!
When you do maintenance on a regular basis, your hands get sloppy when you're done, and hellip; you touch the body of the car with your hands. The body of the car gets dirty, too, so I bought this product so that I don't get my hands dirty. !
There are 100 disposable sheets, so you can use them without hesitation, and of course, your hands will be dirty too. No. You can do maintenance without it, but the rest of the process (Hand wash) Wouldn't it be better to have it, considering things like
View detail
Failed to choose a size
I used to use inexpensive polyethylene gloves inside my military gloves to prevent my hands from getting dirty, but Because it was not the original use, it was torn by a little thing and often had a hole in it So I'm going to change to work gloves at the end of use
I chose the M Size with 88mm palm and 81mm middle finger, but the length of my fingers were just right, but the palm of my hand was It would have been nice to have been in a L Size … (・ω・`)
When I tried to work with the rubber gloves, I found that they are easy to use and the maintenance work is Of course, I could use it for washing and waxing my car without tearing it
Although the rubber gloves were originally intended to be disposable, it would be a waste to throw them away after one use I used them until they were noticeably dirty and then threw them away In the meantime, the gloves didn't tear or stretch and were strong
View detail
My hands didn't get dirty and it was surprisingly easy to put on and take off
I've been working with my bare hands for a while now, but after I started maintenance on the chain area, I've been able to get it all done I used this one after looking for it because I felt it was harder to remove the stains and I saw the imprints
The size of the Gloves is the equivalent of a S Size, but it starts with a M, so I ordered a M
That way, it felt like a fit, and I didn't have much trouble removing it when taking pictures with my phone
It's thin, so it doesn't feel too different from working with bare hands, so it's good However, I think it would be a waste to throw it away in one go, so I'll replace it when I see a hole (^_^;)
View detail
not bad
I used to use the same Manufacturer's Boots for many years, but it has been discontinued and I'm looking forward to the next Boots This Boots came up when I was thinking about what to do with
Unlike the previous one, from waterproof genuine leather The change to synthetic leather with WaterproofInsertFilm has been made to make it more water-resistant and more durable There are still concerns about its useful life
They are a little tight I use 26.5 for regular shoes, but these Boots are a little tighter at 27.0, one size larger I've been wearing 27.5 toes Oversized When I bought 27.5, the toe is Oversized I'm worried that the zipper might be broken when I try to close it too hard
However, that's the only complaint I have with them, they are only synthetic leather and are quite soft and easy to wear So soft that you can ride a Motorcycle as soon as you open it and not feel uncomfortable with GEAR operation
It looks like Casual Boots with ankle guard and shin guard It's a zero
You can use it on any type of motorcycle, from On Road to Adventure The place that has become a design without any sense of discomfort has been taken over from Boots of the previous MODEL It can be evaluated
View detail
Fits: SUZUKI GSX-R250, LAMBRETTA LAMBRETTA 200, LAMBRETTA LAMBRETTA 50, LAMBRETTA LAMBRETTA 125, HONDA CB250R, HONDA CB125R, APRILIA RS125, YAMAHA RZ350, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SR500, YAMAHA CYGNUSSR, YAMAHA MAJESTY S, YAMAHA MAJESTY 125, YAMAHA NMAX, SUZUKI Gixxer 150., SUZUKI GSX125R, YAMAHA MT-03, HONDA PCX125
It is a solid product
I am happy with the solid construction
Since there is no Garage, durability is important
The durability of the fabric is important because it is exposed to rain, wind and sunshine
This product is satisfying with its thick fabric
View detail
Fits: SUZUKI GSX-R250, LAMBRETTA LAMBRETTA 200, LAMBRETTA LAMBRETTA 50, LAMBRETTA LAMBRETTA 125, HONDA CB250R, HONDA CB125R, APRILIA RS125, YAMAHA RZ350, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SR500, YAMAHA CYGNUSSR, YAMAHA MAJESTY S, YAMAHA MAJESTY 125, YAMAHA NMAX, SUZUKI Gixxer 150., SUZUKI GSX125R, YAMAHA MT-03, HONDA PCX125
It is a solid product
It's a solidly built product at a reasonable price
The fabric is thicker and seems to be more durable
Motorcycle seats are exposed to rain, wind and sunshine, so don't go cheap or bad It is
I'm very satisfied with this product
View detail
It's going to be hard to put on
I haven't used it in the rain yet
I put it on over the Gloves to try it out
Maybe it's because of the tight wrist-Rubber squeeze on the wrist
It was hard to put on (It was hard to get in.)
Putting it on in a hurry in a sudden rain might be a bit tricky..
View detail
It will come in handy if you have it
I bought it at the price of purchasing goods
Until now I mainly used military gloves and kitchen gloves, and did Oil change Chain cleaning etc But after using this disposable glove, this time I tried using this disposable glove, Fit feeling is good and excellent in thin hand and finger feeling It's nice to know that my hands don't get dirty after the work
We have to use thick work gloves to prevent injuries from protruding objects around the engine It can be used for all other tasks
I was right to choose the M size as I thought the size was a little tighter
It comes in a pack of 100 sheets, so 50 uses? I think it's quite useful
View detail
COSPA is good.
Buy it because it hurts soon because it is cheap
I bought a little Large 29 because Size of the foot is 28, but I got Large.
Because making was relaxing eyes I thought that it was 28
View detail
Fits: YAMAHA N-MAX 155, YAMAHA N-MAX 125, YAMAHA NMAX155, YAMAHA N-MAX 155, YAMAHA N-MAX 125, YAMAHA NMAX155
yamaha nmax seat cap
this is the 3rd time i purchased this seat cover for yamaha nmax, this time for my nmax's friend who just like me wants this cover to protect his nmax seat from cats' scratches. this seat cover is really simple to put on or put off, within 1 minute i can be assured that my seat would be safe from any harm from pets. a satisfied and recommended purchase for nmax owners out there. View detail
For light work
Because it is thin, Fit feeling and workability are very comfortable. However, when dealing with kerosene or Parts cleaner, it is often the case that holes are opened when you notice it, so in the case of working with them or working for a long time it seems better to use a slightly thicker product View detail