Repurchased because I lost it

I was using it without screwing it on and the lid flew off and I had to repurchase.
I'm happy to get OEM Product, but I'd appreciate it if they sell it for $100 or so.
(The cosmetics are bad, but it's OEM, so it can't be helped.)

It seems that there is an instruction to use screw lock to stop the screw, but when I want to re-tighten the screw that fixes the base and carrier, it is troublesome to remove the smallest screw&If the screw mountain dies, it will be troublesome. View detail

I went away and bought it.

I was using it without screwing it down and it blew up somewhere, so I had to repurchase it.
Screw fastening is a must, but I am concerned about the strength of the Screw and Screw hole.
(Because it needs to be removed every time it is retightened, which is about once a year.)

I am satisfied about the price and the texture, and I am glad that I was able to purchase it at a reasonable price.
You can check the compatibility on the DAYTONA site. View detail

I bought it because I lost it.

[How is it used?
I bought it from Webike because the Corrugated Plate was missing when I pulled it out to use the Base for a Box that had not been used for a long time.
Was the one you received as per Image?
GIVIBox has become a necessity in my Motorcycle life, it is a repurchase of a familiar product, so it is as per Image.
How was your experience with it?
The slightly different curvatures at each end make it a strong and well-thought-out component that can be attached to most large carriers.
As embarrassing as it may sound, I went to a nearby Home center to see if I could purchase a thicker Bracket from Home center to create a replacement, sparing the time difference between ordering the product and its arrival.
I looked for a thicker bracket that would not be strong enough without a certain thickness, and realized that it would be far less labor intensive to purchase four GIVIOEM Corrugated Plates than to purchase a bracket of the required length.
Needless to say, when I got home, I purchased the Corrugated Plate along with other products from Webike.
[Points to note]
If each part is tightened at once, it may not be firmly fixed depending on the shape of the Carrier to which it is to be installed.
How did it compare to other products?
I don't know because I have never used Boxes from other companies.
Other items that would be helpful
Point and hang of installation
[Point to note... Perform a preliminary tentative assembly as described in Section 2.2.1 and find a point where the Base can be firmly secured to the Carrier.
[ITEMS TO BUY TOGETHER
・・・ This is an additional purchase in case of loss. "Repair parts" So I think everyone's situation is different in terms of what other parts are needed. What's the missing component?" and purchase the necessary parts.
GIVI's strength is that it has a lineup of large repair parts.
[Opinions and requests to Manufacturer
Thanks for the detailed follow-up on Aftermarket parts. Please keep up the lineup. View detail

useful tool kit

When going out on a motorcycle, I like to carry a tool bag with me. This GIVI T515 tool bag purchased from webike has always been placed on my motorcycle. It is small and does not take up space, and it can hold most of the common repairs for motorcycle maintenance. The tool is made of nylon, which is strong and durable. It also has a MOLLE webbing strap that can be fixed on the side bag for easy portability. -------------------------------------------------- -------- I like to carry a toolkit with a motorcycle out. This GIVI T515 toolkit I bought at Webike has been placed on my motorcycle. Tools, nylon manufacturing is solid and durable, and it also has a Molle belt  that can be fixed on the side bag and is convenient to carry. Powered by Google Translator View detail

It is used in MONKEY125.

I feel it is a moderate Large size for me.
I think the square Case is suitable for the round MONKEY125, but what do you think? View detail

Just changing it changes the atmosphere.

V56 on the Red Yes Reflector. [Color] Changed to Smoke.
Phillips Screwdriver1 pc was used for the replacement and the atmosphere changed dramatically, giving a tighter impression.
I am glad I replaced it. View detail

Just changing it changes the atmosphere.

V56 on the Red Yes Reflector. [Color] Changed to Smoke.
Phillips Screwdriver1 pc was used for the replacement and the atmosphere changed dramatically, giving a tighter impression.
I am glad I replaced it. View detail

Caution when installing on Inverted Front Fork

Many people have talked about the effectiveness of Screen, so I will spare you.

CB650R (2021) I installed it in
The CB650R has a taper handlebar, which makes it somewhat difficult to install in the handlebar section.
The center section does not match the handlebar diameter, so it is installed at the end, but it must be shifted slightly because it interferes with the Master Cylinder.
Since the clamp will be installed in a halfway position, it is recommended to use an anti-slip rubber or similar material on the clamp.

Installation on the front fork is even more difficult.
The CB650R has an inverted front fork, so the supplied band is not long enough, and a longer one must be provided separately.
Also, because of the shroud on the side of the body, the gap between the front fork and the handlebar is very narrow, and the only place where the handlebar can be installed without interference is at the top of the outer tube. (Image 2)

This mounting at the very top is tricky, and the rods that hold the Clamp attached to the Screen and Front fork are too long for the product-supplied ones.
Therefore, a separate length-matched rod is required here as well. (Image 3)


I hope the above information will be helpful to those who are thinking of installing this product in the same car model. View detail

GIVI Mono-lock case 39L

We chose the same capacity as the OEM.
The Large size was also good, but I chose the Large size because I carry only a limited amount of luggage. It is easy to use and I think it was a good purchase. View detail

useful shelf

My motorcycle is YAMAHA NMAX155. The storage space of this motorcycle is relatively small, so I need to add a tail box. This GIVI Mono Lock shelf kit solves my problem, and it can be installed without changing the original tail rack. One point is fixed, the installation is very firm, and the quick-release floor is convenient for installing the GIVI's tail box. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. The storage space of this motorcycle is relatively small, so you need to install the tail box. This GIVI Mono Lock shelf kit solves my problem, and it can be installed without changing  the original factory's tail frame. More The point is fixed, the installation is very firm, and the fast -moleter floor is convenient to install the GIVI tail box. Powered by Google Translator View detail

I think it is Exclusive Design and well made.

I think it is Exclusive Design and well made. View detail

Speaking of Rear box, GIVI

[How is it used?
When you are on a long-distance touring trip, you not only want to drive but also to do some shopping. In such cases, the Accessory CaseSpace under the Seat of the vehicle is not enough at all, so we installed it as a luggage compartment.

[Was it as per Image?
The Rear box is a rugged, non-painting Rear box, but it still has a high quality feel when it is new. If Plastic protectant is applied every time the car is washed, the quality will be maintained even after several years.

Was the installation difficult?
Installation is not so difficult at the Level that you can do it by yourself if you have tools, but it is somewhat tedious. If you are good with your hands, you may be able to install it smoothly. In my case, I use a special fitting bar for my car model to install the box.

How was your experience with it?
It is neither large nor small, so I was not bothered by its width while riding, but the overall length of the body is longer, so it is a bit tricky to maneuver in tight spaces. However, it is very convenient because I can put my helmet, gloves, and Plus alpha small items in it while parked, and I can put my shopping items in it while riding.

[Included Parts:were they on?
Spare key was attached.

[Was there anything that disappointed you?
It is the overwhelming Manufacturer in the Rear box Share, but there is one quirk when locking the top lid. Once you get used to it, it does not bother you so much. View detail

It is easy to install.

It was easy to install after modification according to the Instruction Manual. However, the price is too high. View detail

Just the right size feeling

For Yamaha Toracer 900GT and SIDEPannier
Quantity in FittingPLR2139:Set installed
GIVI's E22N (Resin Case) This is a replacement from

As expected, the width direction of the car body is wider than when E22N was installed.
It feels wider, so when passing through a narrow
Be careful not to snag the Pannier.
But the lengthwise and crosswise directions are not too large.
I have a feeling.

Rigidity of Pannier itself (Firmly degree?) is as good as it gets.
It improves over Resin Case.

Top box is GIVI's WreckerTRK52N.
I'm putting it on the website, but I wonder if it's a Material difference.
Even though the color claims to be Silver.
I sense a slight color discrepancy.
This product appears titaniumium color-like. View detail

Easy to use Size

Full face helmet Gloves Rainwear Puncture Repair Kit can fit with room to spare. You don't have to worry about your luggage being stolen when you take a break. View detail

Mono Key type security!

Installed on BURGMAN 400.
I don't do Tandem riding, so I think 40L capacity is enough for me. the OEM specified box is 47L Large type, but the price is also Big, so the price is also Big at Monokey.
I chose V40 because it is more affordable. monokeyCarrier, an option of SEA BASS, is made of steel and looks very strong. View detail

GIVI GIVI [Repair Parts Number] Universal Base Lid [Z114]

I bought it because I forgot it had screws when I removed it from my last car and pried it off and broke it.
Large change was helpful because they also offer these parts.
One point to note is that the two screws are not included, so be careful not to lose the screws when replacing the previous car. View detail

Pricey, but...

I use it every day on my commute to work, so I installed it to make my life a little easier.
It is pricey, but the effect is tremendous, with almost no wind on the upper half of the body.
There is almost no wind in my hands and a Grip heater would not be a problem.
The wind doesn't blow on your head either, so you can even run with the Shield open.
Now it would be great if it doesn't get white after continued use. View detail

Truly GIVI

It is indeed GIVI.
It is expensive, but I have no complaints about its loadability or appearance. View detail

GIVI GIVI Mono-lock case B47

I originally used a Honda OEM 37LTop case, but I think it was the shape, but I changed to GIVI's B47 because I couldn't fit as much stuff in it as I wanted.
Naturally, the capacity is larger, so it can hold more things, but the shape (internal height) makes it easier to put things in.
GIVI after all! View detail