Reviews
Better than standard Seat
The seat is 3 cm higher than the standard Seat, but the bend of the legs is smaller and the flat shape makes it easy to change the position back and forth.
I like the low price, but this Option sheet is so good that it should be standard....
However, the standard Seat has a better texture and looks better because of the Flat seating surface.
Also, it would be nice to have a choice of Black.
View detail
3A output, so when you are in a hurry
It is a bit of a hassle, though, because the side cowl needs to be removed,
If you follow the instruction manual (excerpts from the service manual), you should be able to install it within an hour.
When returning the cowl, make sure that the claws and other mating parts are properly seated, and fasten the bolt and clip.
It has a 3A output, so if the Device side supports it, it can be charged quite quickly.
Lids are Material:I wish it had a sturdier feel because it comes right off with Rubber.
Since it is key-linked, I borrowed D-Unit's ACC line from here (Red/Blue line).
View detail
Honda Attachment
Handling Instruction Manual is not easy to understand and installation takes time. Parts are not usable after all. View detail
I like HONDA's RALLY Footpeg.
The footpeg has a wider foot placement surface than the standard footpeg, allowing the foot to stand on the foot.
GizaGiza is not so sharp, so it is gentle to Sole, and the touch of Shift is also comfortable, which may be the effect of Brushbo.
I recommend it because it is a category that is not difficult to replace.
The material is stainless steel, and the rust-resistant part is also invisible Fashion.
View detail
CBR250RR
That's the OEM!
It was also perfect for the CBR250RR!
View detail
good
Honda genuine rear rack is good. Installation is easier than other products because only two bolts need to be fixed, and it is good because it is chrome-plated. View detail
As for comfort improvements, they are much more pronounced compared to MainSeat
It was converted at the same time as Main's Comfort seat.
The Pillion Seat has a more noticeable increase in softness and volume.
It is hard to find such a comfortable Pillion Seat for a tourer-type motorcycle.
If you do a lot of Tandem driving, you can bet that Tan Demar will be raving about Large after converting to this!
It is believed that the
View detail
We realized an improvement in comfort.
As the "Comfort seat" naming suggests, the ride is comfortable and pleasant.
When you straddle it after the conversion, you can immediately feel that it is SOFT.
When you start driving, it is comfortable and absorbs Shock from the road surface.
As for the footing, it is almost the same as NORMAL, and I have no complaints.
It looks promising enough for comfort during long continuous runs (which I haven't done yet...).
The appearance has changed from NORMAL's Sharp and Sporty to Gorgeous.
It changes the feeling.
The use of the Pillion Seat is described there.
View detail
Good product!
A good product corresponds to the NC 750 X 2023 version everything perfect. Delivery for Italy at least 25 days in my case ---------------------------------------------------------- A good product corresponds to the NC 750 x 2023 version everything perfect. Delivery for Italy at least 25 days in my case Powered by Google Translator View detail
Dream Service Manual
I was looking for this manual for long time and eventually decided to buy it. It is not cheap but a worthwhile. The manual in Japanese language but has lot of good photos of servicing bike. Good to have a copy View detail
Meter panel
It will be cool to wear this. View detail
Fits: HONDA Africa Twin, HONDA AfrivaTwin Adventure Sports, HONDA Africa Twin Adventure Sports ES
Quick Shifter- HONDA CRF1100 Africa Twin
Reliable store, quality product, flawless delivery, perfect fit. 5 stars for Everything . Thanks. View detail
Fits: HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Safe and Secure OEM Parts
[How is it used?
Used to repair noise from around the Camshaft Chain, which is a common problem with this type of car.
How was your experience with it?
No problem since it is OEM Parts
How did it compare to other products?
OEM Parts, so you don't have to worry
[Points to note]
It takes time to peel off the old Gasket.
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Super Boldor, HONDA CB1300 Superbordor, HONDA CB400 Super Boldor
Honda meter panel
Fits exactly like the original. The atmosphere of the instrument panel is much more luxurious after installation. I used alcohol to clean off any dirt or oil prior to installation. I am very satisfied. Recommended for those who ride the CB400 REVO. -------------------------------------------------- -------- Fits accurately like genuine. The atmosphere of the instrument panel is much more luxurious after installation. I removed dirt and oil cleanly before installation and installed it before installation. the CB400 Revo. Powered by Google Translator View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110
Installation of Carrier
The product itself is a standard item, and it is a natural part to have, but when it comes time to install it, it can be a bit of a challenge.
First, a hole must be drilled through the Center bolt.
Without File or Leutor, this work cannot be done.
When removing the fork guard, the small claw is broken, which seems easy but is quite difficult.
If you are a Challenger who wants to do it yourself, for the experience.
You can try it.
If you buy a new car, do not hesitate to have the dealer install Option Parts.
Of course, a labor charge is required, but the work is more than worth the price.
The product itself is a good Large change and is indeed OEM Parts.
We hope this will be helpful to those who are in the process of purchasing a new car.
View detail
Fits: HONDA CRF250LDA-M, HONDA CRF250LA-M, HONDA CRF250LRD-M, HONDA CRF250LRA-M
Corresponds to the 2023 CRF250L (8BK-MD47)
The product arrived in bound condition, not in Copy.
The 2BK-MD47 (until 2022) was a Main book and the 8BK-MD47 (from 2023) was a set of two books in the form of Supplement.
I think it is essential for those who do maintenance and servicing. Demerit is a little expensive.
View detail
Fits: HONDA CRF250LDA-M, HONDA CRF250LA-M, HONDA CRF250LRD-M, HONDA CRF250LRA-M
Corresponds to 8BK-MD47
The one I received this time was properly bound.
As for the contents, the 2BK-MD47 was configured as a Main book, and the 8BK-MD47 was attached as a separate book.
There is not much that is different between 2BK and 8BK in terms of large size, but I think that many details have changed since they are included as a separate volume.
Service manuals are indispensable for doing maintenance and customization on your own.
It is a little expensive but I am glad I got it.
View detail
OEM
Installed on GB350S.
Originally, this was OEM parts for CB1100 and not for GB350S, but looking at the shape of the tank, we decided that there would be no problem and purchased it. Installation was very easy and no problems were encountered.
The adhesive is so strong that it cannot be reapplied. It is recommended to position it firmly before attaching.
Pad is not as thick as expected, about 2mm at most Large.
The body is a simple shape that fits in with any motorcycle.
Items more comfortable and satisfactory for GB350S than I expected.
View detail
OEM's sense of security ◎Evaluation depends on application?
■About Quality
There was no BALI, uneven paint, or Wobble, only HondaOEM.
About ■Design
I like it because of its simple, MINIMAL design, and I think it is good because it does not disturb the look of the car without the Rear box or Carrier base.
■ About performance
The largest load capacity is only 3 kg. If you want to put a large box, this product is not suitable for you. If you want to put a large box, this product is not for you.
About Pricing
As it is an OEM product and has undergone proper testing and development, it is inevitable that the price is a little high. This is not limited to Carrier, but it is for those who want to buy peace of mind, because the safety of using Carrier in Rule is an attraction that third-party products do not have.
View detail
Fits: HONDA Live DIO, HONDA JOKER Helmet, HONDA BROAD, HONDA GYRO CANOPY, HONDA CABINA, HONDA GYROUP, HONDA GYROX
Impressions of HondaOEM Parts
I installed it and have had no problems so far.
I bought it here because the price is lower than other Motorcycle stores.
View detail