It is inexpensive and additional purchases are recommended!

Connect to Power Outlet Harness and power to Quantity:2pcs taken out.Quantity on Front:Pair (for Left and Right) It is useful to connect Daylight's Wiring. View detail

Can be installed without modification.

It can be easily installed inside the LeftCowl of a 2023 CRF250RLY50.
I crawled Daylight's Wiring from there and the cord was short and convenient. View detail

I put it on to prevent scratches on the Meter Lens.

[How is it used?
Purchased to prevent scratches before they occur as I am buying a new car.
Was the one you received as per Image?
The product was exactly what I expected.
How was your experience with it?
I think it is effective because it is not hard to see after it is applied and there is a certain amount of heat.
[Points to note]
The meter itself has a slight radius (curved surface), so it is best to apply it with care.
I was very careful, but I let Air hair ・・・・ I crushed the air bite, but it was a little hard to see, so I waited and made a mistake.

Other items that would be helpful


Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I would like to ask the manufacturer to include a small paper for removing oil and grease, as I know some people do not have one. View detail

With reference to your Impression.

I bought one from this Manufacturer based on your Impression. View detail

Engine assembly in progress little by little

I am in the process of reassembling a NORMAL 3-disc to Reinforced Clutch. I am assembling a Normal engine that I bought second hand, making some modifications. It will be a while before I can actually ride it again, so I gave it a 4. I think it is generally good except for the cosmetics. View detail

Performance remains the same, but

It's really a self-satisfied product.
Changing to this will not change Motorcycle's performance, but it will
RedMONKEY, so we are changing anything that can be changed to Red color.
The product itself shows that it is carefully made.
If you are interested in Tres Up, you must buy it! View detail

The amount of folds is harder to decipher, but

I bought it just to have more Red colors!
It's harder to tell how much of the folds are there, though.
I'm self-satisfied with the increase of One Point in Red color.
It is a good product without, but the quality is good and the product is good.
I am satisfied. View detail

It's best

Because it is small in size, it seems difficult to lift luggage.
The quality is good and the overall balance seems good.
It creates a pretty look and looks better than when it was original.
It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat.
Thank you for the fast delivery. -------------------------------------------------- -------- Because it is small in size, it seems difficult to lift luggage. The quality is good and the overall balance seems good. It creates a pretty look and looks better than when it was original. It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat. Thank you for the fast delivery. Powered by Google Translator View detail

Fast delivery and good quality packaging

The product arrived 4 days after ordering. Thank you for the fast delivery. The quality of the product is good compared to the price. Webike's credibility is increasing. The set consists of the necessary tools and has a stall.
Searching is easy by organizing product categories by bike model. ---------------------------------------------------------- The product arrived 4 days after ordering. Thank you for the fast delivery. The quality of the product is good compared to the price. Trust in webike increases. It consists of tools that require a set configuration and has a stall. Searching is easy by organizing product categories by bike model. Powered by Google Translator View detail

FIMONKEY, Flywheel removal

I think it was easy to use. It was safe to use. View detail

KITACOGasket

I used it to replace the exhaust system on my ADV150 and it worked fine with no exhaust leaks.

There are no particular difficulties in installation. View detail

Cospa best

I haven't driven after the replacement yet, but I'm looking forward to it.
I will make adjustments in the Rear in the future. View detail

Genuine Kitaco Exhaust Gaskets for SUPER CUB 50

These gaskets were purchase due to needing an exhaust change on the Super Cub 50 and I do not like reusing the old ones if at all possible. These Kitaco ones were reviewed well and so I decided to give these a try myself. The price for the gaskets was excellent and far better than buying the OEM ones which essentially do the same job anyway. I have used a few Kitaco parts before and they really are great quality. I did have some other parts in an order and everything arrived in 5 days from being shipped. The gaskets arrived in the Kiataco packaging and were spot on. No issues or problems and the specs were perfect too. Very pleased with this purchase. View detail

To replace Exhaust System

2Quantity:The set is reasonably priced, and KITACO offers peace of mind. View detail

No particular deficiencies

It is for advanced users, as a certain amount of knowledge and a certain amount of tools are essential.

The quality is not bad.
There is no BALI that can cut your hand.

Holes, which are holes, should be cleaned thoroughly because of shavings.

BALI should be shaved and finished as usual with a little File, about 1000.

The head has a big valve already assembled,
It was easy to install the included High Camshaft and OEM Locker Arm.

Reinforced Crank, Piston, Cylinder, Headetc.
It's a bit rough, but this is all that's included, along with an instruction manual,
I think it is a much better value for money because of its good quality ^^^;. View detail

Cosmo

The accuracy of the Sprocket is lower than that of other companies' Sprocket. (The difference between where the Chain is stretched and where it is not is large.)
However, if you take this into consideration and Chain tension the product, I think it is a good cosmetic product. View detail

Best kit if you are looking to improve the clutch appearance and durability

About quality and texture - The reinforced 6 clutch disc kit from Kitaco is made from aluminium, steel and fibres with a lovely machined surface finish on the outer rim, the quality from the overall fit and finish is perfect. About the feeling of use - The reinforced 6 clutch disc kit would have to be the best kit if you are looking to improve the clutch appearance and durability over the original setup. Would have also been nice if all six posts had been drilled and tapped to accept the corresponding aftermarket clutch lifter plates. Products to buy together - A key product to purchase when upgrading the clutch system is a set of heavier clutch springs. There are varying degrees of aftermarket clutch springs available, just depends what suits you. Difficulty of installation - The installation of the reinforced 6 clutch disc kiti is an intermediate task that took 1.0 hour to complete. Some mechanical aptitude and the use of special tooling and basic hand tools is what is required to access the engine internals and assemble the clutch kit to secure onto the main shaft of the tramsmission. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the reinforced 6 clutch disc kit is no different. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the reinforced 6 clutch disc kit, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail

1pc. is Smaller

The first one was a little smaller than the second one, so the Quantity:Set and it's falling down.
The other one was a good Just fit. View detail

STD Size

Motorcycle I bought used, originally came with 15T but I changed it back to STD Size 14T.
The Rear sprocket and Chain were replaced at the same time as the FrontSprocket, making it much easier to drive. View detail

530-1010216

Gradual work to improve the performance of the HONDA SUPER CUB 50 CUSTOM engine has led to the need to replace the leading star with more teeth. I did not experiment with manufacturers and looked at the availability of a star with the necessary parameters from KITACO, in their assortment I found the detail I needed. As always, KITACO was not let down, the material and processing quality are at their best!!! View detail