Reviews
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
More effective with Shower head cover
I uploaded the photo of the Normal holder I removed. You can see the difference when comparing with product photo.
I supply Osil falling from the Shower head cover to Camshaft efficiently, so I think it is more effective in combination with Shower head. It is a part that buys a sense of security so you can experience it, but it is definitely useful for a SoupUp Engine.
Aluminum Cut-out has very high texture, but obviously it can not be seen from the outside. It is good that you can also do self-man again (lol
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
For Maintenace Stand of KSR 110PRO
Currently owns Ninja250SL and KSR110PRO, Ninja250SL has a Screw hole to install receiving Bobbin, but there is no KSR110PRO. When using Maintenace Stand, I used the Large-scale Maintenace Stand of VHook formula and Small-sized Maintenace Stand of Universal type at the beginning, but because I take the place, I go to this product as if I can manage it anyhow. arrived.
By hooking VHook to Slider's roots, you can Lift up, you can use the Universal expression Small Shaft Maintenace Stand for dismissal, Space clearer.
The disadvantage is that Axle Shaft's stop pin is not attached, so instead of passing needle gold through Screw.
View detail
Fits: HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100
SHIFT UP Aluminum Axle Slider
Although it fell down immediately after installation, it protected the head of Nut firmly. If you change the position you fall two or three times falls Large seems durable. There is no glue because it is running Circuit, but it is a necessity to protect the head of Nut and Bolt. View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
One stone three birds
It is a feet dress-up parts that shines more than expected, and at the same time it is possible to hide BoltHead of Axle Shaft, which is dirty at the same time, and it also has a Protector effect of a relaxed one Stone three bird Parts. There is no hand that will not be installed at this price. View detail
The appearance is good!
I chose Plating, but Matching with SP Mukawa's Clear black Breather Hose "GOOD!" is. I bought one extra by reserve!
Other places color. I think I will purchase a thing with a different size.
View detail
Fits: KAWASAKI 500SS Mach III (H1), KAWASAKI 500SS Mach III (H1), KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS MACH III (H2-A), KAWASAKI 750SS MACH III (H2-B), KAWASAKI 750SS MACH III (H2-C), KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI 750SS MACH III (H2-A), KAWASAKI 750SS MACH III (H2-B), KAWASAKI 750SS MACH III (H2-C), KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Fit is as good as or better than o.e.m. a well made product at a very reasonable price. I USED this on my 1973 S1 250 Kawasaki
Fit is as good as or better than o.e.m. a well made product at a very reasonable price. I USED this on my 1973 S1 250 Kawasaki View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD
Weight reduction of Stem
Handlebar Lock is possible so I made it to this Stem, but it's contributing to weight saving with half the weight of NORMAL with considerable meat extraction. Although the appearance of goods is good, because the place is not visible, the whole view does not change so much. View detail
I used it for MONKEY.
At the time of Bore up, since Bolt had rust, I bought it for exchange. The handling Instruction Manual was also described in a very understandable manner, it was the first exchange, but it was possible to install without mistaking the Length.
Also, Cap Nut is very fashionable, cost-effective is perfect.
View detail
Fits: HONDA XR50 Motard, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 50
It may be expensive
A friend asked me to purchase it. Although I feel slightly more expensive, I think that there is no such thing as to open so so it seems to be Brand purchase with insurance. It is usual that there is no return and no BALI in the mounting hole. View detail
Exchange from OEM
I think Cost performance is good..
It is not related to performance, but it was able to be installed without any problem.
Instruction Manual is also easy to understand, with difference in length Quantity : There was 2 pc but it was possible to install without problems.
Also, Plating of Cap bolt may be a One point.
View detail
Center Stand is necessary for any Motorcycle.
I mounted SHIFT UP Center Stand in JAZZ.
Because I replaced Rear suspension with DAYTONA 's AluminumShock 240 mm Meter, the car height rose and I had to cut it apart, but the serviceability has improved very much.
There is no loss by wearing parts.
View detail
Hose separator
I changed the Hose of MONKEY's Oil cooler from Mesh to Rubber hose, so I bought it for fixing Hose.
Anodized Treatment is also well PetitCustom (One point) I think it's good.. If the price is a little cheaper it is a 5 star but I think that I am satisfied with my self.
View detail
Slightly longer than OEM
Because I got a Clutch Cable of SHIFT UP, I thought it was simultaneous installation, I thought it was simultaneous wearing but purchased it, but since it was a bit longer than OEMCable, I changed the angle of Arm and stretched Spring by hand to improve return and devised it. Clutch Cable We expect both durability View detail
Rigidity UP
It is obviously thick and solid compared to Normal top bridge, remove Normal top bridge Quantity : Pair (for Left and Right) Height was different when measuring the height of.
I think the Top Bridge needs to be replaced on a regular basis.
It looks pretty good so I installed it correctly.
View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
Because it was rusty and replaced, exchange
OEMStud bolt of BENLY 50 was rusty and rusted, so I was worried about when it would break, so I changed it. It became Polished. It was very troublesome to change Stud bolt so it was nice to change. It is cheap.. I will recommend the exchange if it rusts. View detail
Sounds good
I think that it is not a part that makes a difference
To solid material Material
I am satisfied with Large change well
It is good to have a lid of Mesh in the exit part.
As you can see how to fasten Screw 1 pc
There is nothing to prepare as it also comes with a tool
It is a reality (Lol)
View detail
The atmosphere is good!
Purchase this item of bar Clamp type because it is a vehicle with no Mirror hole in Left Side.
On this occasion anyway Quantity : Pair (for Left and Right) It fit, but the atmosphere got tightened much.
Design that you do not see for a moment is perfect for SOLO of your car.
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D
Cool
I planned to purchase Duralumin Sprocket but I was worried about durability so purchase Steel, Duralumin's Hybrid Corre.
The price is somewhat higher, but if you have only Body, you can purchase Steel's teeth only so COSPA is somewhere.
Beauty looks also Parenthesis well Dress-up effect is also enhanced.
As a problem I am using a lightweight material but it is heavier than NORMAL's iron Sprocket.
View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSF100, HONDA NSR50, HONDA NSR80
The targeted Footpeg Position came out.
Mounting on NSF 100.
We, 178 cm tall and long arms and legs system is very cramped at hanging Position, Boots' Size is also Large Because OEM's footpeg position shifted his feet and collapsed, the toe was scraped, "Somehow ..." I thought that I was saved by this product.
In addition to this product I additionally put the tip of OEM footpeg 1 / I have about 3 Cut. Thanks to this I can not rub footpeg even at the bank angle which makes elbows.
Currently we are considering introducing the Seat CowlBack plate to further stabilize posture in the bank.
The bad point is that the enclosed Bolt's quality is not very good. There was an uneasy response from the time of installation, the proper tool - In spite of being tightened with the proper Torque, Bolt has a tool trace attached.
It is a place where a load is applied when falling down, so it is a machine with a lot of vibration, so there will be anxiety there.
If you are going to desorb again and again, you may need to take a look at Bolt's exchange.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D
It is good to have Bolt
If it is a product only with Support, you have to buy Bolt, but OEM is troublesome and you can not put your life on Bolt of Home center around there.
It is also troublesome to go to purchase a strong Bolt at the Bolt store
If you bundle it from the beginning I think whether it will take time and effort.
It is for NS-1, NSR 50, but it is attached to NS 50 F. Since it interferes with Fork, a part of Support has been deleted.
View detail