Great!

[How is it used?
I had always felt that the OEMHandle position did not fit my body, so I took the plunge and bought it.

Was the one you received as per Image?
The look and feel was great.

Was the installation difficult?
The Instruction Manual instructs to change the angle of the hose joint coming out of the brake master cylinder because the height of the handlebar is slightly higher. However, if we remove the brake hose, we need to bleed the air out of the hose, so we reevaluated the hose routing and installed the hose as it is. As a result, the handlebar was adjusted to the quantity:Pair (for Left and Right) The Hose does not seem to be subjected to any undue force even when it is turned up to 2.5mm.
However, the manufacturer's instructions are to install the Hose at a different angle, so do so at your own risk.

How was your experience with it?
It is the best! This has been the most effective Parts I have ever custom made.
The forward tilt has been loosened and the aperture has been slightly increased, making it much easier to operate the Handlebar.
Vibrations also seem to have been reduced, and the numbness in my hands that sometimes plagued me has disappeared. View detail

The stable Mukawa Brand!

Finally! SPTakegawa Power Filter (OEM Element exchange type)

Installation Kang Tan! Effect Outclassing!

Rapidly accelerate!

Exhaust system replacement for more power! View detail

Air filter kit

I am amazed at the amazing effect of the simultaneous installation with F-Con. View detail

Compact cool kit

I was convinced once again after running with the reliable Mukawa Oil Cooler installed. View detail

Required whenever you replace Sprocket.

I bought this Meter thinking it was strange because my fuel consumption was 45km/L when I set the Driven Sprocket to 16T.
I found a setting item for Sprocket tooth number and Tire circumference length, so I set them, and sure enough, it was 59km/L.
Large change was also useful and useful custom parts to know accurate information.

It is good to display the exact RPM digitally, but since it is not used for Race, it would be better to use an AnalogMeter for that, and display Odo and Trip at the same time in the display area for that, or make the clock display larger.
I used HandlebarBrace's Bracket to make it high mount. View detail

Summer, rain protection

In summer, my buttocks get steamed without it.
I wish there was one for one person because only one person rides, but it is a PCX125.
However, it is cold between the legs in winter. If you don't like it, take it off.
However, in rainy weather, there is no penetration of underpressurized water from the buttocks. View detail

Honda emblem bracelet

Easy to install, need to unscrew the headlamp to access the screws at the horn. There is no need to take out the wires from the headlamp as per instructions, just shift the lamp cover around for easy access. View detail

Installed at the same time as MC41 Bore Up Kit

Clutch feels the same as it did in NORMAL. I'm sure it's not slipping anymore, but... View detail

Good item

The filter area is much larger than the existing pure filter, so the amount of air inhaled is likely to be greater. That's why I feel like my bike has become more powerful after installing this item. View detail

For CL250

It was comfortable for touring in the middle of summer.
It is easy to install.
I don't need it in the winter.
Remove and wash lightly.
Storage. View detail

Product # 06-08-303 Rear stop

I purchased a rear brake lever for the HONDA Monkey from the manufacturer TAKEGAWA. Due to the longer lever, it became easier and more efficient to brake, plus the lever is made of aluminum, which reduces weight – this is an important factor. The lever has a beautiful appearance, which improves the appearance of my motorcycle. I recommend everyone to buy front and rear levers together at once in order to immediately improve the braking of their motorcycle. The installation takes 5 minutes. I purchased a rear brake lever for a HONDA Monkey from the manufacturer TAKEGAWA. Due to the longer lever, it is easier and more effective to brake, plus the lever is made of aluminum, which reduces weight - this is an important factor. The lever is nice looking which enhances the appearance of my bike. I recommend everyone to buy front and rear levers together to immediately improve the braking of their motorcycle. Installation takes 5 minutes. View detail

Product # 06-08-302 Front stop

I purchased a lever for the front brake for the HONDA Monkey from the manufacturer TAKEGAWA. Due to the longer lever, it became easier and more efficient to brake, plus the lever is made of aluminum, which reduces weight – this is an important factor. The lever has a beautiful appearance, which improves the appearance of my motorcycle. I recommend everyone to buy front and rear levers together at once in order to immediately improve the braking of their motorcycle. I purchased a front brake lever for a HONDA Monkey from the manufacturer TAKEGAWA. Due to the longer lever, it is easier and more effective to brake, plus the lever is made of aluminum, which reduces weight - this is an important factor. The lever is nice looking which enhances the appearance of my bike. I recommend that everyone buy front and rear levers together to immediately improve the braking of their motorcycle. View detail

Product # 05-02-0015 Hyper

I bought it for a Honda Monkey. This coil proved to be on the good side, the moped became more nimble and responsive. The quality is just great. If you have the opportunity, I recommend buying it. I bought it for Honda Monkey. This reel showed itself on the good side, the moped became more nimble and responsive. The quality is simply excellent. If you have the opportunity, I recommend buying it. View detail

PetitCustom

Installed on CL250
It's nice to look at.
I've been riding for a while.
Where there is a gap between the OEMSeat and the
Where wrinkles form.
I'm sorry View detail

Product # 03-01-110

Bought this as a spare for the Honda Monkey. This filter showed its best performance; I tried zero-resistance filters from other manufacturers, but with them the engine works much worse. Separately, I would like to note the high quality of workmanship, no complaints. There are no problems with installation, I recommend!!! View detail

Power Filter

I replaced it, but could not get a sense of the experience. View detail

Hyper Ignition Coil

Acceleration feels better in city driving. View detail

Purchased at Custom.

It was fine, but good. View detail

Product # 09-06-0121

This kit was purchased for the Honda Monkey. During the work on setting up the valves, the bottom cover was stuck and it was not possible to unscrew it. As a result, this lid was unscrewed, but it was very damaged. To solve this problem, this kit was purchased. By good tradition, TAKEGAWA pleases us with the quality of its products and this time did not let us down. We are very satisfied!!! View detail

Oil cooler expansion

I installed KITACO's Bore Up Kit, and since there was an oil cooler outlet, I made my own bracket and installed the oil cooler of XR250 that I had. View detail