Sato racing rear sets on Triumph Street Cup

Overall god product but would like to have mounting instructions in english. Possible to assemble with just the parts draving but not easy. Only technical changes would be flickable pegs and a better brake return spring. Also had to cut brake side distances to front mounting points 2mm:s, they were too long to fit. Wanted to have flickable pegs so managed to use original pegs with some creative engineering from my parts bin, same time lovering the pegs from +40mm:s to about +10mm:s. View detail

Gold is darker than expected, giving the impression of Orange with Lame.

[How is it used?
SEA BASS vehicles are installed to prevent the footpeg from hitting the foot when the foot is lowered.
Was the one you received as per Image?
I ordered Gold, but the actual color was darker than the Image in the picture and not what I expected.
Was the installation difficult?
For installation, it is necessary to take measures to prevent air contamination when installing the Brake Side.
How was your experience with it?
The ability to set multiple positions is desirable, and the operation is better than expected.
[Included Parts:were they on?
All items for installation are included.
[Was there anything that disappointed you?
Color and texture a little disappointing.
There is no Instruction Manual. There is a simple pictorial diagram, but it is difficult to understand

I initially intended to use Sansei RACING's Multi Footpeg,
I asked for it at Webig, but I had to wait for a long time for it to be ordered, and three months later, it was cancelled as discontinued.
For this reason, we had no choice but to select Baby Face.
With the Rear Sets installed, the footpeg will no longer hit the footpeg when the car is stopped.
In addition, the position can be adjusted to the user's preference, so there were no problems.
However, since it is made of aluminum, it is necessary to retighten it assuming that the gold will lose some of its weight after installation. View detail

mc51 Racing hook

I bought it because I go to Circuit a lot and often have to Transporter, so I realized that I don't have many Points to put Tie DownHook on.
I recommend this product because the texture and rigidity are very good, beautifully anodized and easy to use.
I think it will be more useful for those who often go to Circuit than those who do city driving or Touring. View detail

We chose Black to match the car body.

Babyface is the quintessential babyface.
The texture is too good.
Crimp is also working well. View detail

Cowl was safe.

[Feeling of use]
As a beginner & short stature with poor footing, I installed it from the time of purchase with the feeling that it was just a spell.

The other day, I finally cocked the car on the Right side while making a small turn at low speed, but when it fell down, the Slider, OEM Exhaust System and Bar End acted as fulcrums to prevent the Cowl from cracking and the Brake pedal from bending, making it impossible to drive the car on its own.
(Mirror has scratches on the edges)

As a side note, the Brake lever was also replaced with a Short Type, so it was safe.
(The hand was also quickly replaced with an external adjustable one for Small Sakura Lever far)


Installation
You should have a Caliperetc. measuring tool ready since you will be using several different lengths of bolt and collars for installation.
Liquid Gasket is not included and requires your own preparation.
A long T-shaped Hexagonal Wrench to attach the DURACON tube to the Base is a sure thing.

Due to the structure of the Engine Cover Bolt and its co-tightening, it is faster to remove the OEMBolt with a power tool.
In addition, the black cowl on the lower side needs to be removed to install the base of the Left Side Slider. View detail

Simple, clean Parts

I could have left the Tandem Footpeg off as is, but I was concerned about the screw holes, so I bought this product. I wanted something inconspicuous, so this was exactly what I was looking for. View detail

baby baby

I chose it after much consideration with other front axle protectors, and I am very satisfied.
First of all, the price is very reasonable. Also, the product quality is excellent. If you buy
Recommended. I believe that the baby face will protect the 23-year-old Katana well. rear axle
It would be nice if a protector came out, but I couldn't find it no matter how much I searched ----------------------------------------- ----------------- I was worried about other front axle protectors and chose. First of all, the price is very reasonable. In addition, the merchandise is also excellent. If you buy it Recommended. I believe that I will keep Katana well with my baby's face. Rear axle I wish I could come out as a protek tap, but no matter how much I found it. Powered by Google Translator View detail

I even bought Hexagonal.

Installation is easy, but in the case of RR-R
Tighten the Frame Slider mounting bolt to 64Nm.
If not, it will affect the running of the car. Therefore, we purchased a Long Hexagon socket separately and tightened it with a torque wrench. View detail

Used for JC92Front

I installed this on a Grom JC92Front. The Right Side Axle Nut of the JC92 is a UNut, so it is very tight. I couldn't turn it with a normal ratchet handlebar, so I extended the Spinner Handlebar + handle with a Pipe.
The Right SideAxle Nut has a 19mm socket, but I was a little worried. View detail

Made by trusted Babyface

Product Name
BABYFACE Babyface Engine slider

Item Number
006-SY028E

Vehicles
MT-09 (Year:2021 Model:8BL-RN69J)

Number of man-hours
About 1 hour

Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers

Why did you choose this product?
We chose this product because we wanted to anticipate the motorcycle's fall in advance and limit the damage to the smallest possible amount. Also, I thought that Babyface would have a repaired product, so I decided to purchase it. I can fall over with no problem. (I never want to do that, but...). It is a good luck charm.

Was the one you received as per Image?
It was just like the Image. It was not as noticeable as I expected.

Was the installation difficult?
It was hard to tell which part Screw is for. Please refer to the Instruction Manual and work with the screw size and length. If you lick it, it will be Large strange engine rotation.

How was your experience with it?
I hope I won't have to grab it again, and I trust you will protect Engine.

[Included Parts:were they on?
None in particular, Instruction Manual is included.

[Was there anything that disappointed you?
I hope the price is high and the performance is good when you use it. I just wish it was a little cheaper.

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

Right Side does not fit.

[How is it used?
Frame caps are now available and purchased.
Was the one you received as per Image?
I thought it would be a little brighter Green Light.
Was the installation difficult?
The Left Side easily entered, but the Right Side did not enter completely and jumped out.
I removed it because it was going to get in the way at Brake.
How was your experience with it?

[Included Parts:were they on?

[Was there anything that disappointed you?

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

It was not long enough and could not be installed.

Installation is easy and anyone should be able to install it easily.
The one I purchased this time could not be installed due to insufficient length. View detail

BabyfaceFrame Slider

This was purchased because it would not catch and slide if it did.
Well, I haven't experienced the effect and don't want to, so the effect section of the evaluation is a rating to look at.
I knew the Gold amount was too high and SliderBracket (bar) The SliderBody is attached to the body and a screw is cut on it, so the SliderBody is turned around and attached to the body, and then the screw is used to stop the body from turning around. But when I tightened the screw at any position without tightening the SliderBody to the end, it was loose. View detail

Helmet doesn't even hit the footpeg and looks good.

Used in STREET TRIPLERS 2020
This is the position where the Helmet does not hit the OEMfootpeg by hooking up the S Size of ARAI's RX7X.
I like the texture of the Plate, and I think it has the best pop-out and position. (Most aesthetically pleasing)
However, although it may not be limited to Babyface products, co-tightening with Tandem Footpeg was more difficult than I had imagined.
It took me a long time just to unscrew, pinch, and tighten the screws. View detail

For decoration

I put it on as a decoration, even though I don't load it with luggage. View detail

Recommendation as Entry model!

I was considering purchasing Rear Sets because my brake pedal was rubbing on the circuit, but I was not sure what to do because all the products are quite expensive, then I found this Set Back Plate.
I think anyone with tools can install it.
The width of the footpeg (where the foot is placed) is increased by the thickness of the plate, but not enough to be a concern.
It can be recommended as an Entry model for those who want to keep costs down or solve problems for now. View detail

I'm glad I put it on.

I was skeptical at the time of purchase.
I bought it with the hope that it would improve my feelings.
Installation is not that difficult.
Please check when outside Rear Sets are used.
There is no difference in the Large size when entering Neutral at a stop, but the Shift feel while driving is completely different.
Snap and enter. It is not a feeling of softening.
It's like an increased sense of security that makes it harder to make Shift mistakes.
The difference can be seen when continuously SHIFT UP during acceleration or Downshift when entering a Corner.
Bearings are not bearing, so I think periodic lubrication is necessary View detail

Size, Visual… Batch!

No problems with the sizeetc. of the Screw. Installation was easy. View detail

I wanted the look of the Bar End and to install a BabyFace Lever Guard!

Let's start with the appearance.
I think the workmanship is beautiful, as it is BabyFace's product.
The problem is installation.
The CBR600RR installed this time had the OEM weight removed from the handlebar, and the Inner Weight Spec. was installed. This work is necessary for HONDA cars with OEM Weight. It was troublesome to do this work. However, if you are a person who does your own maintenance, it is possible to install the OEMWeight by yourself.
Once the OEM weight is removed, the rest is the same as installing an ordinary external weight.
I was concerned about how the vibration transmitted to my hand would be due to the change from OEM weight to BabyFace's weight, but I was relieved to find that it was the same as with the OEM weight when I ran the car. View detail

Installed to make it look Race ish!

Installed on CBR600RR this time.
I installed the Lever Guard because I thought it would make the car look more race-ready!
Originally, it was designed to prevent the brake lever from falling over during a race when it made contact with another car.
We do not know if it will protect Lever in the event of a fall.
If I wanted to install this, I would need to replace the Handlebar End with one made by BabyFace.
The Bar End and Lever Guard by BabyFace were installed to make it a much more race ish!
I am satisfied with both the appearance and quality.
I don't know if it will be Demerit, but the Gold amount seems a little high. View detail