Reviews
ManufacturerOEM Product Peace of Mind
ManufacturerOEM Product for peace of mind. Reasonable price. Good delivery time.
One more thing that would be nice would be to include a card made of paper to write down the date and time of oil change and mileage. (I just need to write it on the memo paper and save it by myself.)
View detail
If you have it, it's safe.
The service manual is a good thing to have because it provides information that can be used to make decisions in the event of a problem. View detail
T9GT comfort seat
Install original comfort seat on my bike. It provided extra cushioning for pillion and good support on long distance trip. Previously pillion can easily slide up front (especially on hard braking) causing uncomfortable for rider. Highly recommend item to upgrade. View detail
T9GT performance damper
Install performance damper on my bike. Previously bike feels a bit wobbly during high speed, now it's more plant and stable. Highly recommend for others thank. View detail
T9GT comfort seat
Install original comfort seat on my bike. It provided extra cushioning for my butt and good support on long distance trip. Highly recommend for others thank. View detail
T9GT engine protector
Install engine protector on my bike. Material was sturdy and fits well, giving added protection on my engine in case on accidently drop. View detail
Best protection pads
Install new production pads on my bike. The material is with highest quality. It fits well and looks good on my bike. Highly recommend for others thank. View detail
Two layers are recommended.
Cover is 2L Size, body is XSR900 (RN56J) The parking lot is used for open-air parking.
When I bought a new car, the dealer gave it to me as a purchase bonus and I was using it, but I had been using it without tightening the String at the hem, and there was a hole where the footpeg hits, probably from the wind, about the second year of use.
I bought the same product because I was not sure about the Size feel of the other company's product, as the dirt that clearly shows the Cap part of the Tank on the Others was floating around and I thought the open hole would widen if I continued to use the product.
However, the first Cover was still usable, so we decided to use two pieces with the new one inside.
As a result, two layers are good. The old outer cover is getting a large amount whiter in the front blue area due to sun damage, but the inside is still as blue as new and the fabric is still soft.
As a Motorcycle Cover, it is convenient that there is a part to put a Wire lock and a Chain lock through the front and rear Wheels. There is not just a hole, but a notch, so it is easy to put the locks through.
Size feeling is that if you don't squeeze the String at the hem, you can't get the size you want, especially Quantity.:Pair (for Left and Right) It may be good for those who want to cover it completely as the hem is just hanging on the ground with excess hem on the sides.
Instead, I don't think moisture will escape, so if you are concerned about moisture, I think the F Type with Ventilation would be better.
View detail
The pressure on the cheeks is somewhat better.
Replacing it will relieve some of the pressure on the cheekbones.
But,
It is better to increase the HelmetSize by one size than to replace it with a thinner Cheek Pad.
I recently thought it might be a good idea...
View detail
Essential for DIY maintenance
Recently, when I buy a motorcycle, I always buy the service manual along with it.
I don't do much tinkering with my motorcycle anymore, but I want to do at least some maintenance myself, so I think Torque Management is essential.
View detail
I'm glad I traded up.
I replaced it myself, but it was quite large.
However, the effect is outstanding.
It was amazing to be able to feel the change just by stepping over the Motorcycle before starting to ride.
When I drove the car, I could feel that the rear of the car was so soft and smooth on the road surface, whereas the normal suspension made the car feel fluffy and unsettled.
Sorry, I'm not very expressive. Crying
As others have mentioned, I'm a little concerned about the orientation of the Preload Adjuster hose coming out of the bottom side near the Engine.
View detail
A little difficult to put up.
I am satisfied with the Guard where my feet hit the ground when I ride.
One Primer is included for sticking, but I wanted to stick it firmly, so I bought the same Primer from amazon and applied it lavishly before gluing it. It is firmly attached without peeling off.
View detail
Don't fall down.
Engine, FR/RRAxle, ClutchBox, Generator, etc.
There are various types of sliders and guards, but this time we installed a guard on both sides of the engine.
I don't want to test the effect too much, but first of all, I think it will be grounded first because it sticks out more properly than EngineUnit.
The foundation is made of Plate and Pipe of the genus Gold, and is attached to the frame, creating a certain degree of rigidity.
In addition, the gold plastic finisher with the Yamaha logo and the decorative spacer reduce the ruggedness that is often seen in the Guard and make it a stylish Yamaha-like product.
I don't want to be a burden to you, but I think it is a good choice to stock up on them as a fallback plan.
One point, the bolt at the stopping point on the front side of the vehicle may need to be Torque managed properly.
Incidentally, there is another YamahaOEM in the shape of a starfish, which is also a Quantity:I think it will be even more prepared if it is attached with a Set.
View detail
sure enough
I think the quality is good because it is a product of Y's Gear. It is difficult to install this product if you only own a Wrench. At least Wrench, Ratchet, Tie Wrap, and Nipper are necessary. The quality is good, so I am satisfied with the cost performance. However, I think the load limit cannot be relied upon in a good way. I think so. View detail
Windproofing and soundproofing effects are there.
This is a replacement from Puch Screen.
PoochScreen is Large type and will look forward over Screen.
The windproofing and soundproofing effect is very large, but on the other hand, in the rain, raindrops on the screen significantly worsen forward visibility.
This Screen is about 12 cm shorter than the pooch and has good forward visibility.
However, it was not as windproof and soundproof as expected.
It would have been nice if the front edge of Screen was 5 cm higher.
Of course, the effect is much larger than the OEM's initial Screen.
The quality of the Acrylic pooch is almost undistorted and you can see the front over the Screen, but this Screen looks slightly distorted.
In the middle of winter, when there is little rainfall, I think I would revert to pooch.
View detail
YAMAHAPerformance damper
After a short ride, I feel that the ride is similar to the ride immediately after the front fork is over-fallen, with a lighter steering action and a slight reduction in vibration. View detail
YAMAHA Side Bag Carrier
perfect fit for my Yamaha XSR 900 2022, I will be ordering more Parts and accesssories in the Futr. So happy with my purchase. Thanks View detail
Fits: YAMAHA BWS125(BWS), YAMAHA CYGNUS X SR, YAMAHA NMAX, YAMAHA Axis Treat, YAMAHA CYGNUS X, YAMAHA MAJESTYS, YAMAHA NMAX155, YAMAHA CYGNUS Gryphus
When it comes to Motorcycle Covers, Y's Gear
The Motorcycle Cover I had been using for about 5 years deteriorated and ripped, so I replaced it with a new one. I use it outdoors 365 days a year in a sunny place, so I can't avoid deterioration, but if it lasts for 5 years, there's nothing to complain about.
This time I bought the VERSION with BOX. The ADV150 is a bit roomy in size, and the hem covers the body of the car tightly.
The blue line on the front of the vehicle is easy to identify, and the draw cord at the hem is easy to use. In my opinion, Y's Gear is the only choice for Motorcycle Covers.
I think this is about the fifth one I have purchased.
View detail
High quality and very pleasant to use.
I was using a 4 year old Motorcycle Cover (about 5,000 yen at Home center), but it started to become brittle after about the 3rd year, and when I took it on and off, I could not get it off. Paste Tape when you run out." However, it has finally deteriorated to the point that even when gently attached, it will break off along the fibers.
The last one was so full of taping that I couldn't tell if it was a cover or a tape.
Motorcycle is stored under a carport so it wasn't in direct sunlight or exposed to rain, but I guess that's the life of the Cover.
When I took the new Cover out of the box, it was the same Silver as the previous Cover, but I felt a thicker and shinier Bird feeling (Well feeling, not crumbly). 。 Durability looks promising.
Size is 2L. And it is just the right size, not too large and not too small.
The Wire lock holes are also set in the front and back, and there is a cord that can be used to squeeze the hem with One-touch for ease of use.
View detail
Prevent flooding from the ankles
[How is it used?
The length of the Rain Wear I normally use is short, and during a Large rainstorm, the ankle area flooded.
This was not a good idea, so I decided to buy a Cover for the ankle portion.
I chose it because it is made by Y's Gear and the price is low.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
It is a little troublesome to wear Rain Wear because it requires a little more work than Rain Wear alone.
Rubber straps are inserted at the top and bottom, which are moderately elastic so they will not shift.
It is long and protects up to the knees, so it is unlikely that water will enter through the ankles with it on.
I am satisfied that it worked as I imagined it would.
[Points to note]
It is not necessary if Rain Wear is firmly attached to the ankle because of the time and effort required to put it on.
How did it compare to other products?
It is good because it is a Y's Gear product and inexpensive.
【Review】
This is a good product for people who get their ankles wet.
Naturally, shoes should also be waterproof, or if not, choose products with integrated shoe covers.
View detail