Made by stable YOSHIMURA

This is a stable and standard product from the point of view of SEA BASS riders. The design is not particularly elaborate, but the texture of the leather is not bad. It is a product that can be used for a long time. View detail

Updated with Version up from DigitalMulti Temp Sensor.

Before I put this on, I had an old-style DigitalMulti Temp Sensor.
The LCD was dark and hard to see in the daytime, but after replacing it with the Progress2, the LCD is easy to see in the daytime and the thickness is thinner.
I'm quite satisfied with it, but when I do a version up, I have to change from the root Sensor to the Coupler to get the Coupler to fit.
For that reason, everything had to be renewed. View detail

Used during overhaul

It was used during an overhaul above the waist of an XR100REngine with a 115ccKit for APE 100.
The ability to obtain detailed Parts later is helpful for longer use. View detail

Used during overhaul.

It was used during an overhaul on the Engine waist of an XR100R with 115cc for APE 100.
The ability to obtain detailed Parts later is helpful for longer use. View detail

Good purchase!

I was considering using Beams Exhaust System and YOSHIMURA Exhaust System that I purchased,
I had decided on Beams for the design and YOSHIMURA for the Exhaust System sound,
In the end, we decided on the discount rate at Sale.
When actually installed, Parenthesis is better than it looks in the picture, and the sound is not too quiet,
In a good way. Poco Poco." The sound is very nice, and I am satisfied with Large.

I was able to purchase it during the Sale period and had a Point, so I was very satisfied with the Gold amount. View detail

Exhaust note is larger than expected.

I purchased this product based on the information on YouTube, etc., with design first, and selected the Stainless Steel Type because it has no band on the silencer part and is refreshing. However, the exhaust sound is a bit louder than expected, and it bothers me a little during warm-up operation. The acceleration is very fast and it goes into 6th gear in no time. View detail

Convincing YOSHIMURA

I installed YOSHIMURA for the first time. The sound quality at low rpm is great, and when the engine is turned up, the sound becomes gentler, so I can warm up the engine without worrying about my neighbors. The exhaust gasket and silencer side gasket are not included. Don't forget to buy them. View detail

xjr1300YOSHIMURAFull Exhaust System

Japanese Vehicle Inspection Correspondence, but the Idling is quite loud. It will be a little bit better once the warm-up process is over, but the bass sound can be heard all the way inside the house. The previous exhaust system was Beams Slip-on Silencer, but the volume at idling is obviously higher. By the way, Beams has 92dB at Idling and YOSHIMURA has 91dB, but I and my friend thought that YOSHIMURA is definitely louder than Beams. Also, I'm a little disappointed with the sound of the gurgling sound when idling....
When I started to drive, I could hear the good sound of Mr. YOSHIMURA. The exhaust pipe has been burned up nicely and I'm satisfied with the sound! View detail

The sound quality allows you to enjoy a single-cylinder feel!

The replacement gave the exhaust a crisp, single-cylinder-like sound. View detail

The price is too high.

The price is too high.
Should be attached to Exhaust System as Included Parts:.
Parenthesis so good I bought it. View detail

I don't want to be a burden to you, but I'm not sure I'd want to be a burden to you, either.

[How is it used?
Touring is the main application.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Installation was easy.
How was your experience with it?
The effect is unknown because it has not yet been tipped over.
[Included Parts:were they on?
It was all there
[Was there anything that disappointed you?
There was not.

It was fitted as an insurance policy.
It is elaborately finished as an industrial product.
It is no wonder it is more expensive than other companies.
I am not a *YOSHIMURA believer. View detail

Purchased outside of the intended use

No quality problems at all.
I purchased it for a non-purpose, but now that its purpose has been defeated, it is in storage.
We have already installed a higher grade Stand Hook on our Motorcycle. View detail

Yoshimura wind armor

Item landed and we'll received.awsome packing in full bubble wrap.very satisfied.my second purchase.more to come.highly recommended.thank you webike.AWSOME!! View detail

Yoshimura cyclone

I wanted SP Tadao's Exhaust System, but there was no 23-year MODEL, so I decided to go with Yoshimura cyclone. View detail

Thermos vacuum insulated tumbler - 340ml

Thermos vacuum insulated 340ml Tumbler with YOSHIMURA's logo engraved on it.
I think the performance is good because Thermos as quality.
It is inexpensive to find out that the OEMAttachment is packaged in a YOSHIMURA cosmetic box and has a PartsNo affixed to it.
It would also make a great gift.
One complaint is that I wanted 600ml in the Lineup, not just 340ml. View detail

V-ST SX Good to match the color of the car

I purchased R-77SCYCLONE SMC? out of the 6 types released for VST SX.

I started the car right after changing it, and my friend laughed at me because the volume was so different from the OEM! (^^;) Urasaito than expected (Japanese Government Approved Exhaust System, in case you are wondering)

The sense of power seemed to have increased in almost all areas. When I was driving in 5th or 6th gear on a motorway and following the flow of traffic, when I accelerated at the start of the overtaking lane that suddenly appeared, I felt the power of the car was increased in almost all areas of the road.

Normally I would have dropped to 4th gear and pulled like a 250cc driver, but it was so powerful that I was able to accelerate the same way in 5th gear. ・ If you drop 4th gear, it extends more. (^-^)

I drive on public roads at a leisurely pace, so if the 250cc runs this well, it is perfect. View detail

DL1000 V-STROM 250SX became 300SX lol

I immediately installed the newly released YOSHIMURA tubes. The acceleration is sharp and different. Torque UP in all range of low RPM and high RPM. The sound quality is very powerful for a serious YOSHIMURA. Personally, I am satisfied. The sound quality is quite powerful for a serious YOSHIMURA brand. View detail

It looks cool, but…

I bought it because of the way it looked, but the installation was very Large strange.
First, I removed the bolt that holds the Radiator in place, removed the oil cooler, and installed it while searching for installation methods on the Net.
I almost crush Radiator's Core when I install it myself lol.
If you are not familiar with it, it is definitely better to ask the store to do it.
After it's installed, though, it looks cool.
It was maintenance I never wanted to do again. View detail

Yoshimura Tank Reservoir cover / sock

I have purchased many Yoshi parts and accessoried in my time and this keeps being a go to for the reservoir cover. They just work great and do what are expected. This one was the black version with the "I've got the power" logo. The cover is great value and better than some of the other brands I have seen recently. The price was I believe a sale item which also helped. My orders are all shipped using EMS as they just deliver when I expect them to. 5 days from shipping and my order was delivered. Pretty good for the distance it travelled. The sock came in the Yoshimura packet and was also mounted on a piece of cardboard to keep it's shape. This cover was being added to the pretty black Suzuki GSXR 600 that has had a custom paint sceme and this black cover will fit with that perfectly. The cover itself has a really good tactile feel to it and is stretchy enough so that it does not loosen off and get lost during riding. This is not the case with a few of the other covers i have tried and this is why I keep coming back to Yoshimura ones. Very pleased with the purchase and the service I got from Webike. Brilliant!! View detail

There's a change in the second strike.

Used for YamahaPOCKE with AIRSALAluminum cylinder. I recently switched to TM24Carburetor, so I tested DSFunnel, which I have been interested in for a while.
Many people say that funnels are meaningless for 2-stroke engines, but if the velocity of the intake air is changed, some change in the filling efficiency of the air mixture taken into the crankcase can be felt, can't it? I think so.
When I actually tested it, it was clear that the rise of Torque in the low to mid RPM range improved. On the other hand, there is almost no change in the high RPM range. In general, I think Merit is the best choice for Main for city driving.
After that, the bridge section of the Adapter was modified to look like an airfoil section and the inside of the 2nd funnel was BuffingPolished to improve intake efficiency. View detail