Parenthesis good!

Looks awesome Parenthesis!
Easy to install, but Left SideTandemS hole misaligned? I managed to get it on, but …...
The sound is louder than the OEM Product.
Motorcycle handling is a little lighter. View detail

Luxury Towel

Price is high
But when you use it, you'll be hooked! View detail

Mild-mannered YOSHIMURA

Design, ◎ Best
Sound quality, a little disappointing △
Running, Torque up◎ throughout the entire area
Price, a bit high ?. View detail

Water Temperature Meter and Oil Temperature Meter are here.

This is a standard item that must be installed when changing vehicles.
Excellent water and oil temperature meter, voltage display and clock
I have the impression that it is a little more expensive than other manufacturers, but I choose it because it matches the design and the vehicle. View detail

CarburetorCarburetor setting

The carburetor had been replaced by a flat carburetor and the setting had not been done, so I bought it to make a thicker ring. View detail

Reasonable and easier to handle than OEM

I always use this product when changing oils and fats.
It has a Wrench-enabled head on the end, so it is easy to attach and detach, and despite the fact that it is almost functionally the same, the price is lower than OEM, so it is very useful.

The OEM was Stress because removal could not be done without destroying it, but after switching to this one, there is no extra process.

The Wiring hole is another thing I like about Race ish. View detail

YOSHIMURA！

The price is cheap in spite of YOSHIMURA!
Spring hook is simple but included.
OEM Gasket is not included and must be provided separately.
BracketInstallationBoltQuantity:2pc is easy to lick, so be careful. View detail

I didn't like the foreign body of the often cylindrical protrusion.

I've been seeing a lot of Motorcycles with Frame Sliders lately, and I can't help but notice that cylindrical protrusion…...
However, as I had not bought a new car in a long time, I wanted to equip it with equipment to protect my motorcycle.

Then I discovered YOSHIMURA's Slider. This might not be so different!" I bought it because I thought it was a good idea.
My first impression when I put it on is It sticks out more than I thought it would!" It was
If you think about it, it is natural because it is a stick that protects Frame or Engine.
As you go around the Motorcycle observing the surroundings, I'm like, "Oh, my God, that's an ant. This." I was like, "I'm sorry, I'm sorry.
It blends well with Side cowl.
It's not like it interrupts the flow of the stream.

I think this would be a good recommendation for those who feel uncomfortable with cylindrical Slider as I do! View detail

Play YOSHIMURASound without complaints

I was taking a break at Large Kambo in Aso when a z900rs appeared with a sound I had never heard before and I couldn't help but call out to it.
Thank you for teaching us without being reluctant to do so.
I heard that they had waited more than half a year to get it, but I didn't think it was possible, so I checked Webig's inventory and saw that it was in stock, so I bought it immediately.
It arrived at our house the next day and I couldn't help but run out to buy Gasket.
I should have bought it at the same time when I purchased.
It had a good sound from the time it was being quenched, but after about 500Km, it sounded even better and is happily running in the cold. View detail

The engraving is so thin that it tires the eyes.

I think it is better to complete the setting of Mikuni Carburetor while you are young.

Also, as is the case with all Mikuni setting parts, the engraving may be thin, and if the brass becomes dull after a long period of use, it will become increasingly difficult to see the engraving. In the case of an old carburetor in bad condition, it will be difficult to judge the imprint, so if this happens, change the carburetor without hesitation. Because it will be crazy. View detail

Yoshimura Japan Racing slider

Was the one you received as per Image?
It's a unique design, and it's good!
Was the installation difficult?
It is easy as long as you can detach and attach Cowl.
How was your experience with it?
Unknown as it has never been knocked down, it must be Large sturdy as Manufacturer uses it in Race!
[Was there anything that disappointed you?
None View detail

Pleasant exhaust sound

Product Name
YOSHIMURA YOSHIMURA Machine Bent R-77S Cyclone Carbon End EXPORT SPEC Japanese Government Certification

Item Number
110A-525-5150

Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020

Number of man-hours
About 30 minutes

Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.

Why did you choose this product?
It's cheap and it's a Full Exhaust System. The rest is Brand

Was the one you received as per Image?
It was just like the image.

Was the installation difficult?
Not difficult to obtain. It is troublesome to remove the exterior

How was your experience with it?
Power and appearance have been upped.

[Included Parts:were they on?
Seal, and many other things.

[Was there anything that disappointed you?
nothing special

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

YOSHIMURA??

I have been using YOSHIMURA's Exhaust System for a long time. It is a well-made, high quality, and the sound is a good sound to match the engine, and it is an exhaust system that I am convinced by buying! This is just my personal opinion! View detail

Pretty good

Pros: - Provide better riding position. - Does not poking at my calf when I stop the bike and stand up right. Cons: - a little hard to install with OEM exhaust. View detail

The CB1300 is available at ??

I can't resist YOSHIMURA's Titaniumium blue for CB1300 ??COLOR
The thickness and the angle of having it lifted are excellent! View detail

It is displayed in Garage.

I buy it every year.
It will be placed in a Frame and displayed in Garage.
This single piece has a strong presence and makes it look like Motorcycle Garage at once! View detail

Design is good!

The OEM system is very lightweight and compact compared to the OEM system, and while I like the OEM system, the design of this exhaust system, including the handling, is not too strange and fits in well with the vehicle.
Sound is a little too Large? (OEM is too quiet?)
The only reason I did not give an overall rating of 5 stars is that the delivery time took 6 months Minus one star. (I know it had to be done for various reasons)
I also put on Universal's Heat Guard in consideration of Tandem with my grandson. View detail

Yoshimura Oil Filler Cap for Yamaha FZ1 2008

I do change some of these parts very often and wanted a change from the black oil filler cap I already had fitted to the FZ1. This gorgeous blue colour will go nicely witht he current colour scheme I have on the bike too. This cap does fit a lot of different models of Yamaha and unfortunately, this colour was not available where I have purchased Yoshimura parts previously locally. Not a hard part number to find, but just make sure you cross reference to make sure the fitment is good for your bike. I did try and get one of these a while ago but Webike did not have the blue in stock. Luckily, they had them on an offer and so in my basket. Ihad a couple of other parts in my basket and getting them all shipped together, saved a littel money too. I used EMS to courier my order and I know that I am looking at around 5 days for the porder to be delivered by them. Spot on. The oil filler cap arrived in a nicely packed box surrounded by bubble wrp to keep all my small part safe. This came in a nice Yoshimura box too. The machine work on this filler cap is brilliant, there are no sharp edges even though the threads are tight. The colour is a lovely deep water blue and goes very well with the current colour scheme I have on the bike. I did however have to reuse my existing o-ring as this cap does not come with one. Probably as they fit a few other mopdels, the o-rings may be a different size anyway. Not a problem, I always make sure the o-rings I have in use are in perfect condition before any reusing. Fits great, looks great, what more can you ask for. Thanks Webike, very pleased. View detail

Yoshimura Brake Reservoir Cover for Yamaha FZ1 Brembo Master Cylinder

The FZ1 I have is currently under a remodelling and the brake master cylinder was recently changed to a radial one with a separate fluid reservoir. I do like to have a cover on the reservoir to help stop leakage or condensation build up During colder months. The Yoshiumra cover was one I have used before on a different model of bike with great results. This is the only reservoir cover I believe Yoshimura so not a hard after market part to find. The ocst direct from Webike was excellent and believe it or not, I could not find a blue one anywhere locally. There were a few other items in my order and as I had them all shipped together, I did save a few pounds on shipping too doing this. My order was shipped as usual via EMS as I trust this courier. They get my order delivered to me in 5 days from shipping from Japan, that is a great time frame for such a long journey. The cover came in a nice little Yoshimura packet and kept nice and flat during transit. The cover is some cotton mix and has a really good absorbancy but also dries really wuickly as I soon found out after being caught out in a rainstorm. The cover dried pretty quickly and did not lose any of its shape or colour. I have had other reservoir covers before where they tend to lose colour really quickly and stop doing what they are supposed to do which is wick away moisture. This one has been superb so far. I have no complaints at all. Very pleased with this cover from Yoshimura. Thanks for the help Webike. View detail

Stable Japanese Vehicle Inspection Correspondence

At first, I bought SC's Exhaust System, and when I installed it, I was surprised at the loud noise that I could not believe it was a Slip-on Silencer! I was surprised at how loud it was, and it was hard to believe that it was a Slip-on Silencer. The fit and finish are fine, and the parenthesis is good. View detail