Reviews
It is that it is so intelligible! ... It attaches and follows all explanation and each procedure which removal, decomposition, an assembly, repair, and an inspection procedure are also related. When fastening what tool with the torque of which where e
It is that it is so intelligible! ... It attaches and follows all explanation and each procedure which removal, decomposition, an assembly, repair, and an inspection procedure are also related.
When fastening what tool with the torque of which where etc. is fixed that finely, it is a surprise at the contents of the motorcycle which is precision instruments anew.
Presto Corporation translated into Japanese the English-language edition manual of YAMAHA creation.
In order that beginners may know the composition of a motorcycle and an upper person may do custom, in every level, it is helpful enough.
A price merely... It is although it may be unavoidable if the expense for translating the text into Japanese is considered that a number does not come out... It is if 10,000 yen is not cut at least ...
Although he would like to raise, since the seven contents of * are too expensive, they are made into a three stars.
It seems that but it repents and twists to those who are straying purchase, and they do not have. It is a recommend.
View detail
Although its own motorcycle was not an off vehicle, visibility UP of a tail and a dress-up up also purchased the smoked lens type of the phantom tail light previously. He is doing connection only to wiring of a brake as an auxiliary brake light. S
Although its own motorcycle was not an off vehicle, visibility UP of a tail and a dress-up up also purchased the smoked lens type of the phantom tail light previously.
He is doing connection only to wiring of a brake as an auxiliary brake light.
Since it is fixation of a point and the lower part with bad good luminescence of the piece of good point, compact (size which is not asserted too much as an auxiliary brake light), and LED to a screw, a drilling process is required for a fender.
- a few -- expensive and a compact (it is small and uneasy as a tail lamp) -- I think once that there are visibility UP and the dress-up effect up as an auxiliary brake light.
Form has a form like a trapezoid which the light emitting part made large Ho's base, when it sees from a top.
Although a concrete size is in most, they are 90 mm (in long field of a light emitting part) in 60 mm long and width, and 20 mm only in height (in highest portion).
Although it is very compact, it is individually uneasy to use the smallness, therefore this as an independent tail lamp.
Incidentally about attachment, a total of three drilling processes for screw x2 and wiring are required.
If it may be necessary to make a hole but if full use of stay is made well, and it attaches to a smart, drilling will be required too.
Since it is individually satisfied as it is although it is somewhat more expensive, three stars are used.
View detail
Fits: HONDA CBR1000RR
Although the cheap thing had appeared on the market at the auction etc., since he wanted firm goods, moriwaki products were chosen! A mistake does not occur too.
Although the cheap thing had appeared on the market at the auction etc., since he wanted firm goods, moriwaki products were chosen! A mistake does not occur too. View detail
the and a design -- good -- a place -- a place strong against - vibration -- and a price -- raising -- time - back check -- carrying out -- being hard -- a place
the and a design -- good -- a place -- a place strong against - vibration -- and a price -- raising -- time - back check -- carrying out -- being hard -- a place View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250XC, SUZUKI DJEBEL250XC
Pains is taken over attachment. Although it was saying, attachment was completed ordinarily. If nothing is attached, it is anxious, but it is considerably helpful although a raw material is PURASUTCHIKU.
Pains is taken over attachment.
Although it was saying, attachment was completed ordinarily.
If nothing is attached, it is anxious, but it is considerably helpful although a raw material is PURASUTCHIKU.
View detail
ZRX400 is equipped. Since normal was rusty, it exchanged. Since the die length of stay becomes short, it is a compact impression. Although it is a thing which may be simple, it is touch as hard to see as rearward visibility becoming narrow and
ZRX400 is equipped.
Since normal was rusty, it exchanged.
Since the die length of stay becomes short, it is a compact impression.
Although it is a thing which may be simple, it is touch as hard to see as rearward visibility becoming narrow and not shifting an arm from the part normal which becomes compact.
Although it is expensive compared with other series, since it is not cheap, it is satisfied there.
since -- a three stars.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, YAMAHA WR250X, YAMAHA WR250R, YAMAHA Cerro 250, YAMAHA tricker, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D Tracker X, KAWASAKI D tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRF230F, HONDA XR230, HONDA CRM50, HONDA CRM80, HONDA CRF250M
The relay on the Wright flesh side is removed to D tiger, and the bullet terminal terminal of the existing line and attachment ties to it as it is in a description. It waterproofs by a vinyl tape and the rest is termination. The black earth wire w
The relay on the Wright flesh side is removed to D tiger, and the bullet terminal terminal of the existing line and attachment ties to it as it is in a description.
It waterproofs by a vinyl tape and the rest is termination.
The black earth wire was independently grounded to the frame with the stag beetle terminal.
View detail
It is a stainless color that appearance is not showy, either and ordinary. If a price is also handy and is made into a brembo, I will think that this is enough. Since it is a product made from a stainless, there are also no worries about rust.
It is a stainless color that appearance is not showy, either and ordinary.
If a price is also handy and is made into a brembo, I will think that this is enough.
Since it is a product made from a stainless, there are also no worries about rust.
Keep in mind that conformity changes by a brake hose manufacturer in the case of purchase.
View detail
Fits: KAWASAKI KSR-2, KAWASAKI KSR-2, KAWASAKI KSR-1, KAWASAKI KSR-1, KAWASAKI KS-2, KAWASAKI KS-1, KAWASAKI AR80, KAWASAKI AR50/S
It is used by KSR. By Tokoro who is not seen, although it could be pure, the kitaco was used. Also highly there is nothing and it can use ordinarily. Although the external chamber is used, there is also no leak and it is comfortable.
It is used by KSR.
By Tokoro who is not seen, although it could be pure, the kitaco was used.
Also highly there is nothing and it can use ordinarily.
Although the external chamber is used, there is also no leak and it is comfortable.
View detail
Fits: DUCATI PAUL SMART1000LE [Paul Smart]., DUCATI SPORT1000, DUCATI 749, DUCATI 999, DUCATI GT1000, DUCATI PAUL SMART1000LE [Paul Smart]., DUCATI SPORT1000, DUCATI 749, DUCATI 999, DUCATI GT1000
It attached to DUCATI SPORT1000. Since the components of 999, 749, and a key cylinder cover are the same, it can equip satisfactorily. Although being thinly made from the relation of the sensitivity of an immobilizer recognized, when thing was gai
It attached to DUCATI SPORT1000.
Since the components of 999, 749, and a key cylinder cover are the same, it can equip satisfactorily.
Although being thinly made from the relation of the sensitivity of an immobilizer recognized, when thing was gained, he was surprised just for a moment.
Although wearing is easy, if it covers to the back firmly and a screw thread is not tightened, near a tapped hole will be dented and it will be divided.
Moreover, even if it tightens a screw thread too much, similarly a crack at the place near a tapped hole ...
However, appearance will become gorgeous if it attaches carefully.
comparing with other carbon-parts goods -- this article -- a large -- the grade which is Tokoro who touches eyes in the portion which points out a key each time although it was not necessarily satisfactory and which is such a field since it carries out and is not making from other manufacturers -- it is satisfactory.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY
Although it attached and about 5000 K passed, it has not been called breakage etc. in particular probably because it is fixing on both sides of a rubber between a hose band and a product. the product itself is thick and it is strong -- since that is r
Although it attached and about 5000 K passed, it has not been called breakage etc. in particular probably because it is fixing on both sides of a rubber between a hose band and a product.
the product itself is thick and it is strong -- since that is right, I think whether for it to be limited and to obtain [ which does not have that a crack is much ].
I match the section width of tire of TT100 slenderly a little rather than the normal fender, and think that appearance is dramatically good.
Although it is a spray, there is no telling whether it is better to consider the grade which becomes Massey a little also just because it changed into the down fender.
If it attaches ordinarily, a speed reading cable and a fender rub, and if I want one to improve, if it lets things go, it has deleted gradually.
View detail
Fits: HONDA CB400 FOUR, HONDA CB400 VerS, KAWASAKI ZR-7, HONDA CB500F, Others , KAWASAKI BALIUS II, KAWASAKI BALIUS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA HORNET250, HONDA VTR250, HONDA CB400 SF
It purchased to VTR250. It compared pure, and since there were few cuts of a lens, Wright became bright and also went up visibility. Appearance is also very pleasing with the joke. Although it is satisfactory at a five stars if it is only this
It purchased to VTR250.
It compared pure, and since there were few cuts of a lens, Wright became bright and also went up visibility.
Appearance is also very pleasing with the joke.
Although it is satisfactory at a five stars if it is only this ... Why, the number of the stop location of a bolt or the holes for being required for fixation did not suit or and the multi-reflector which I purchased, but it took pains over wearing for a while.
Although it was certain that it is the die which conforms to VTR250 when I got the mechanic's friend to see, it was said that it could not attach if some are not processed from the above-mentioned reason.
It vacates and equips with a hole partly with a drill after all.
He cannot yet understand whether they were inferior goods and what it was ..
I will make it evaluation called a three stars by Kami based on this evaluation.
View detail
Since wearing which I whom the red who is using it for the cub 90 likes do not have any idea, and it has exchanged for this did not understand extraction from an ignition coil, It did as the description using the joint of the company, when the effect
Since wearing which I whom the red who is using it for the cub 90 likes do not have any idea, and it has exchanged for this did not understand extraction from an ignition coil,
It did as the description using the joint of the company, when the effect attached satisfactorily was called ??, the plug was also exchanged and used for iridium, but the red cable of the appearance which was not able to be felt in particular for insensible me is very dazzlingly beautiful.
View detail
Since 415 sizes are not sold easily, it surely becomes a mail order request. Since it is a product made from steel, a weight is just going to be worrisome, but influence is small if it becomes this size. Since it is the half the price made of a du
Since 415 sizes are not sold easily, it surely becomes a mail order request.
Since it is a product made from steel, a weight is just going to be worrisome, but influence is small if it becomes this size.
Since it is the half the price made of a duralumin, can he buy it freely?
View detail
Fits: YAMAHA TZR50, YAMAHA TZM50, HONDA Ape 50, HONDA Ape 100, YAMAHA TZR50, YAMAHA RZ50, KAWASAKI KSR-2, KAWASAKI KSR-1, HONDA NSR80, HONDA NSR50, HONDA NS50F, HONDA NS-1, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Ape 50, HONDA Ape 100, YAMAHA TZR50, YAMAHA RZ50, KAWASAKI KSR-2, KAWASAKI KSR-1
It is a recommend in the direction which wants to accent the circumference of an engine. He is foppish if bolts are arranged in the same color. In particular except that a wire lock is made, there is also no conspicuous function, and it is a mere
It is a recommend in the direction which wants to accent the circumference of an engine.
He is foppish if bolts are arranged in the same color.
In particular except that a wire lock is made, there is also no conspicuous function, and it is a mere fashion.
Although it is that which will be said if a price is cheaper --
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
Since there is individual specificity in a car body, although the product made from aluminum worried with kana how, it takes durability and determines it here. However, a bearing surface does not suit a head cover slightly as felt uneasy. If it ru
Since there is individual specificity in a car body, although the product made from aluminum worried with kana how, it takes durability and determines it here.
However, a bearing surface does not suit a head cover slightly as felt uneasy.
If it runs although the liquid gasket was attached and being attached forcibly, an oil blot.
.
It is that I do not have you process it shortly in a familiar motorcycle store.
.
Since appearance hardly turns out to be a product made of a rubber of normal although the goods themselves were dramatically good and I chose Black, it is recommendation also at a normal group.
If durability is also markedly different and even wearing can do the level difference of a bearing surface, etc. finely first, it will see by long Sakka and will be reasonable.
However, the direction which does not have close a way (way) processed without suiting a car body bad [ fate ] like me is whether it is safer to choose the large product made of a rubber of tolerance as individual specificity.
View detail
Since it was cheap, it purchased, but since it took time and effort to have not suited a motorcycle somehow and to equip, it stopped using after a while. Possibly the grip of a motorcycle, the size of the brake lever, etc. should have been investigate
Since it was cheap, it purchased, but since it took time and effort to have not suited a motorcycle somehow and to equip, it stopped using after a while.
Possibly the grip of a motorcycle, the size of the brake lever, etc. should have been investigated in advance.
View detail
It is used abundantly to parking of little short time, such as convenience, etc. A size also goes also into a pocket by palm size. However, it is somewhat heavy. Since paint application whose brake lever is black is carried out as comment when
It is used abundantly to parking of little short time, such as convenience, etc.
A size also goes also into a pocket by palm size.
However, it is somewhat heavy.
Since paint application whose brake lever is black is carried out as comment when it attaches, he is worried whether paint application comes off.
Merit that's right direction it avoided prolonged use as written also on the description since it seems to be bad also with the brake when it had attached for a long time, since it was not attached unless it grasped the lever considerably.
Since a color is silver, it is conspicuous also from the surroundings, and I think that there is quite a many effective crime prevention.
View detail
It is used for small scooter and 4MIN. Although it tried to remove a monkey flywheel, a flywheel and adhesion were bad and purchased the skid and the YUNIBASARU holder. For fixation of a clutch etc., I regard power as exertion, engine attachment,
It is used for small scooter and 4MIN.
Although it tried to remove a monkey flywheel, a flywheel and adhesion were bad and purchased the skid and the YUNIBASARU holder.
For fixation of a clutch etc., I regard power as exertion, engine attachment, etc. being required for the direction performed by itself.
I think if a proper tool is used at the end, also prevent an injury.
View detail
Unless purchase and this tool exist simultaneously with the AB27 monkey and cam chain exchange, a flywheel does not take and separate. If KASUTAMU is begun, I will regard a cross mission clutch crankshaft etc. as liking to come to put in a hand to the
Unless purchase and this tool exist simultaneously with the AB27 monkey and cam chain exchange, a flywheel does not take and separate.
If KASUTAMU is begun, I will regard a cross mission clutch crankshaft etc. as liking to come to put in a hand to the inside of an engine.
I think that the direction which performs monkey growth by itself is a required tool.
It is handy also in price.
View detail