Reviews
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
It is used with the zoomer (ruckus). It can be feeling that also exchange weight rollers and acceleration and the maximum high speed differ from normal. Since I think that only this much is dependent on setting, please opt for the setting which ca
It is used with the zoomer (ruckus).
It can be feeling that also exchange weight rollers and acceleration and the maximum high speed differ from normal.
Since I think that only this much is dependent on setting, please opt for the setting which carried out the trial for many things and suited itself.
He seems to meet perfectly at 5.5 g of weight rollers, and 6.0 g.
The maximum high speed thinks that the same speed comes to come out by low rotation, and the burden on an engine is light from before.
Although it may become better according to setting, I would like to use it for a while in this state for the time being.
Since there is a possibility that it will become rickety if attachment of a pulley is loose although attachment is not difficult, either, a seal is damaged, or a screw may become foolish if it fastens too much, we recommend you use of a torque wrench.
View detail
Although the back step was attached at first, a position changes, and since a change pedal is normal when the angle of an ankle is tight when touring etc. are prolonged operation, and it is a multi-step of a daytona, and it changed into the state of dista
Although the back step was attached at first, a position changes, and since a change pedal is normal when the angle of an ankle is tight when touring etc. are prolonged operation, and it is a multi-step of a daytona, and it changed into the state of distance being made and being hard to change, it purchases.
Unlike with the rubber of normal, the straddle to steps, such as a corner, is also effective, and also it is begun to also delete appearance, comes out of it, and is good touch.
It is recommended at those who do not want to change a position.
View detail
Looking for the pure retractable exchange type, made in JP moto mart was purchased. Although there was also uneasiness somewhat since we vehicles were minor and there was no printing in the adaptation vehicle type of ? description of item .. It has eq
Looking for the pure retractable exchange type, made in JP moto mart was purchased.
Although there was also uneasiness somewhat since we vehicles were minor and there was no printing in the adaptation vehicle type of ? description of item .. It has equipped satisfactorily.
If a problem proposal is carried out by force ... if the knurl treatment process and the end cap are attached to an end -- more delightful kana -- I thought ...
however ... it is hard to slide thanks to the knurling, and operativity also improves, and I purchase it, and think that it was good.
View detail
A socket falls out too much simply. If a bolt part goes into a wrench 5 mm or more, even if it will bite overly and will try to pull out a bolt, it stops falling out. It is touch that it is the same even if it exchanges for the socket at hand, and
A socket falls out too much simply.
If a bolt part goes into a wrench 5 mm or more, even if it will bite overly and will try to pull out a bolt, it stops falling out.
It is touch that it is the same even if it exchanges for the socket at hand, and the pressure of POTCHI of junction is too weak.
View detail
When using it for the beginning purchased to carburetor adjustment and using it after half a year, it was not able to use was able to go the crack into the hose, Although the hose of the opposite gasoline which is not a part and is the whole hose is u
When using it for the beginning purchased to carburetor adjustment and using it after half a year, it was not able to use was able to go the crack into the hose,
Although the hose of the opposite gasoline which is not a part and is the whole hose is used, or the crack is using the hose now when it is a question, exchanging it for a commercial item, the O ring which is a cook is anxious.
View detail
this has all the sizes -- if you notice since even Kon has ridden on various vehicle types, it is easy to be terrible [ the user-friendliness which it all had ]! it is easy to put in power -- a moped and the case where it comes out and extends far back --
this has all the sizes -- if you notice since even Kon has ridden on various vehicle types, it is easy to be terrible [ the user-friendliness which it all had ]! it is easy to put in power -- a moped and the case where it comes out and extends far back -- an effect -- although it is unsuitable for a greatest narrow place, it is one article which exists and does not have loss for the time being View detail
Although he thought that he would use for the cygnus X for 08 years and bought it, it hits and has a close game to the feather of a pulley. If it will arrange if the angle degree is attached to a slight degree, but it does by force, the angle of a loc
Although he thought that he would use for the cygnus X for 08 years and bought it, it hits and has a close game to the feather of a pulley.
If it will arrange if the angle degree is attached to a slight degree, but it does by force, the angle of a lock wrench is missing.
It is the price about mind!
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
It was hung by the price and purchased. It was light touch rather than he thought that the touch seen with the photograph was actually seen although texture was also felt good very well. But since the price was a price, it was shopping of convicti
It was hung by the price and purchased.
It was light touch rather than he thought that the touch seen with the photograph was actually seen although texture was also felt good very well.
But since the price was a price, it was shopping of conviction.
View detail
It is in play although it is not purchase for Mr. Webike. Since the rear suspension of GSX-R1100 ('91) normal fell out, it exchanges. The surroundings are also a nitron although it worried with the ohlins. It is decided in the thing which a user h
It is in play although it is not purchase for Mr. Webike.
Since the rear suspension of GSX-R1100 ('91) normal fell out, it exchanges.
The surroundings are also a nitron although it worried with the ohlins. It is decided in the thing which a user has and is different from people that it will be this.
Perfect, if a price is not the circuit run which is conviction, either, this SPORT series is enough as the engine performance.
However, dissatisfaction is felt [ many ] for the part and front in which RIA became good dramatically, and setting in front and behind is not decided.
View detail
A design and the protection-against-wind effect have no complaint (the wind pressure equivalent to a breast portion decreases). Since there were many runs of a highway, it had been rescued. Coloring is finished by the glint wave blue specification
A design and the protection-against-wind effect have no complaint (the wind pressure equivalent to a breast portion decreases).
Since there were many runs of a highway, it had been rescued.
Coloring is finished by the glint wave blue specification of the original.
If it is a direction which can do a little maintenance, it can equip satisfactorily.
I think that it becomes helpful since there is a corner of the wearing method also in HP of a chic design.
View detail
Although it was attachment, it was rare to have written on a description and took time very well. The description was unclear. NS-1 of me had exchanged the radiator for the thing of gamma 125, and at the time of attachment, the steering damper con
Although it was attachment, it was rare to have written on a description and took time very well.
The description was unclear.
NS-1 of me had exchanged the radiator for the thing of gamma 125, and at the time of attachment, the steering damper contacted the radiator and it was not attached to it as it was.
It was in contact also with the oil tank.
since -- changing the location of the bracket attached to Faulk etc. needed processing of the device ? and some.
If it is a pure radiator, it is attached ordinarily, but I think that wearing becomes difficult when the radiator is being changed.
Although it is the comment after attachment, a handle is heavy first.
The piece angle of Ho's handle to which the smile and the steering damper are attached decreased for a while.
If it rides, the weight of a handle is not worried at all, but will be stabilized and will ride easily.
Since it became without saying that a handle is incised suddenly, it is not necessary to feel fearful at a corner.
It pushed down and being crowded became pleasant.
Moreover, since effectiveness of a damper can also be adjusted in seven steps, in 3, a peak, etc., I am adjusting town riding at least to 5.
View detail
At the time of a circuit run, it purchased in order to carry out air pressure adjustment. Since the entry had become the configuration of being easy to go into the air valve of a two-wheel barrow, it was very convenient. Since the inflator is not
At the time of a circuit run, it purchased in order to carry out air pressure adjustment.
Since the entry had become the configuration of being easy to go into the air valve of a two-wheel barrow, it was very convenient.
Since the inflator is not owned, it puts in more mostly in the service station etc. and you are carrying out usage called fine adjustment with this gauge, but will an inflator also become wanting too?
.
.
View detail
It did not leap up too much and chose this muffler too much that is not low. Attachment was easy. I consider that it is better for there to be a spring hook in merely covering the spring of a joint part. The sound volume is quite quieter if th
It did not leap up too much and chose this muffler too much that is not low.
Attachment was easy.
I consider that it is better for there to be a spring hook in merely covering the spring of a joint part.
The sound volume is quite quieter if the attached inner silencer is attached.
Speed hardly changes to normal, either.
It is the highest sound when an inner silencer is removed.
But it is not like [ that it is too noisy ].
It can also be felt that Power went up.
I have removed the inner silencer.
It is a beauty, and coloring of titanium does not have exhaust leakage, either and I regard it as it being cheap and being a quite inexpensive muffler.
View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR250 (S-XR) Motard 03- (MD30), HONDA XR250 (S-XR) BAJA -99, HONDA XR250 (S-XR) Motard 03- (MD30), HONDA XR250 (S-XR) BAJA -99
Although white brothers were used before, since it was splendid sound volume even if it was putting in the inner baffle, a Rough and Road is purchased. Since there is a board by which punching was carried out to the straight part of the inner baffle s
Although white brothers were used before, since it was splendid sound volume even if it was putting in the inner baffle, a Rough and Road is purchased.
Since there is a board by which punching was carried out to the straight part of the inner baffle since the using feeling was changing the cam and the carburetor and its omission was not good, three about 6-mm holes are made and it cancels.
The Power torque response can be balanced and good.
Although sound volume has become large, it is [ but ] somewhat fairly noisier in Shizuka than in white brothers.
More than it considered, it was good, but the muffler has entered the direction of the tire too, and since the accuracy of appearance is not quite satisfactory although one flat washer is attached, it is another and uses the color of aluminum.
Do a new article gasket and a heat-resistant liquid gasket need attachment?
View detail
Fits: DUCATI MONSTER900 DARK, DUCATI MONSTER900 CITY, DUCATI 900SS, DUCATI MONSTER900, DUCATI 916MONOPOSTO, DUCATI 916MONOPOSTO SENNA, その他 4POT caliper, その他 , その他
It introduced simultaneously with caliper exchange. Although the ease of attachment and detachment does not serve as a pure pad pin beyond a comparison, since it is dreadful when a beta pin falls out, wiring of it is carried out to the beta pin.
It introduced simultaneously with caliper exchange.
Although the ease of attachment and detachment does not serve as a pure pad pin beyond a comparison, since it is dreadful when a beta pin falls out, wiring of it is carried out to the beta pin.
View detail
They are texture and the design highest. Although a price stretches a little, there is no lost admiration. However, there is a place which must take care one. If it is going to attach a mirror, a spanner and the monkey hit and it may attach a
They are texture and the design highest.
Although a price stretches a little, there is no lost admiration.
However, there is a place which must take care one.
If it is going to attach a mirror, a spanner and the monkey hit and it may attach a crack like a photograph.
Occasionally, probably it will be cheap, and a cause is this although the crack ant may be sent by certain OKU.
Those who were purchased need to take care very and need to attach a mirror.
View detail
Fits: HONDA VFR750R, HONDA NSR250R, HONDA CBR1000RR, HONDA CBR400RR, HONDA CBR900RR Fireblade, HONDA NSR250SP, HONDA VFR400R, HONDA NSR250SE, HONDA VTR1000F Firestorm, HONDA VTR1000F Firestorm
+ Although the exchange from an authentic positive one with one driver is easy, since it is a place of a fluid especially in brake relation once, it is cautious of the treatment of a fluid, and since a fluid is very [ it is weak in water and ] bad to pain
+ Although the exchange from an authentic positive one with one driver is easy, since it is a place of a fluid especially in brake relation once, it is cautious of the treatment of a fluid, and since a fluid is very [ it is weak in water and ] bad to paint application, avoid exchange of a rainy day etc. and it considers that it is better to pay attention careful for a fluid spilling.
In easy exchange, since this product has the strong appearance influence on the circumference of a handle, at least this one place differs [ product ] considerably.
so that it reflects by sunlight -- glitteringly .
Although the logo (cling with double-stick tape) to which a case has mine in the cap central part has been lost, even when he has no logo, I think that it is completely completely satisfactory.
It reflected in sunlight etc., and since being obstructive and the price were high, it became a three stars of *-1, as the point was said.
Price setting is a big minus point too.
Although it does not change efficiently at all, by looks, it becomes nonchalant big arms!
View detail
Fits: HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA CB400SB, HONDA CB400SF, HONDA CB750, HONDA CB900HORNET, HONDA CBR1000RR, HONDA CBR1100XX, HONDA CBR600RR, HONDA DN-01, HONDA HORNET250, HONDA HORNET600, HONDA RVF400, HONDA VFR800, HONDA VTR250, KAWASAKI ER-6f, KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Z750
[Good point] The quality of the dress-up effect (authentic positive one is awkward at black plastic) (2) plating of the circumference of easy (2) handle up of (1) wearing is good at one plus driver, and a [bad point] price also without peeling is high.
[Good point] The quality of the dress-up effect (authentic positive one is awkward at black plastic) (2) plating of the circumference of easy (2) handle up of (1) wearing is good at one plus driver, and a [bad point] price also without peeling is high. View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400 19, YAMAHA SR400 19
It attached to 97 model SR400. It is the die length of a just right about to an 850-mm-wide trucker bar. Probably, the adjuster is just going to attach the place with the sufficient clutch wire of a daytona to the wire itself. A margin can be
It attached to 97 model SR400.
It is the die length of a just right about to an 850-mm-wide trucker bar.
Probably, the adjuster is just going to attach the place with the sufficient clutch wire of a daytona to the wire itself.
A margin can be given to the adjuster by the side of a handle.
View detail
They are the comment combined with the sheet made from WM. A posture becomes low automatically and it becomes easier to carry out a push lump than forward (a curve inhales automatically !? touch). (^笆。^) I think that appearance may also be collect
They are the comment combined with the sheet made from WM.
A posture becomes low automatically and it becomes easier to carry out a push lump than forward (a curve inhales automatically !? touch).
(^笆。^) I think that appearance may also be collected very much.
Although I feel that since handle width became narrow, vibration which comes to a hand became stronger than forward, I think that it is good for those who like a single.
By a pure grip, a high speed cruise merely seems to be somewhat tight.
View detail