Reviews
So bad
I purchased this product because the color seemed to match. The texture and color were good, but unfortunately, the size of the Bolt part was different and could not be installed. View detail
Fits: その他 , YAMAHA R25, YAMAHA YZF-R3
Product with good texture
Babyface
RaceConcept. RaceConceptHandlebar Kit Up typeSIDEOffset
UP45-10
Handlebar240mm
Item Number : R05-HS47100M
car Species:YZF-R25 (8BK)
The texture is very good and beautifully finished. Unfortunately, the brembo radipon could not be installed this time because it interferes with the Cowl.
View detail
How is this possible?
I was surprised when I opened it! I wonder if this is made of wood. I can't believe it's wood to the touch. It is indeed light, but.., View detail
Fits: HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR-R FIREBLADE SP
Built like a car, expensive.
It was a pity. The Air Filter is made the same way as a car.
This product is not an evolutionary-like product.
You can buy a car for much less.
View detail
Durability Zero
I installed it in a GSX1100S and used it for a few days, then suddenly it became inoperable. I am extremely disappointed. View detail
Extreme cold use is impossible.
After all, it is thick and inoperable. In return, the cold protection performance is not outstanding. The leather-made winter Gloves, which are more maneuverable, provide better protection from the cold. The boa on the wrist feels good against the skin. The leather palm is good, but the fingers are large and twisted, whether due to the quality of the leather or poor sewing. I bought it because I was attracted to Prima loft, but if it is this thick, I wanted at least overwhelming warmth protection. I think I will buy a new one next year. View detail
Cannot be installed due to wrong Bolt
Why didn't you check Bolt twice? I could not install it today. I didn't think it was wrong.
The bottom of the Bolt is supposed to be forward and the top inverted, but the Bolt enclosed for installation had the bottom forward and the Mirror side inverted.
View detail
$550 CAD ($60,000 JPY)!!! with shipping? That is absolutely insane for a cluster shield!.
It's disingenuous to call this a windscreen. Am I missing something? Even direct from Honda you can buy FOUR STOCK covers for the price of one of these! You can actually buy functional windscreens online for less than $25. $550CAD? $60,000JPY? Smoking crack!! Unbelievable brands like this absolutely sullies Webike's reputation. I shop at Webike less because they waste my time as a consumer, not filtering out trash and scams like this. View detail
It started blinking at 4 months.
I like the brightness and color of the Position itself.
I am sorry to say that it was not too durable.
View detail
BEWARE this will not fit as advertised additional part are needed in order to fit,
As the heading says, this will not fit purchased as is. It is not clear on the site, but an additional part is needed in order for it to fit. I dont know what to do now order the part (Costly) or shelf the tank. View detail
Fits: その他 Universal
Less than six months later, this is what you get.
I bought it because there was room in the mounting area.
I bought it thinking it was made of Gold because it was more expensive than other companies' products, but it was inferior plastic.
Thanks to your help, I was just running, but the bolt of the Cover cracked and shattered from the receiving part of the bolt.
The structure is also bad, so if this part cracks, the Filter will not be routed through at all!
I got fed up with all the shoddy Powerfuls with Covers from all the Manufacturers, so I eventually went back to OEM.
View detail
Fits: SUZUKI GN125, SUZUKI GS125, SUZUKI GN125H
A defective product?
After breaking in, the engine was disassembled again and the valve hit the upper part of the piston, causing the EX valve to deform. I think it is a defect due to the forced structure and the position of the shaved part of the Piston that dodges the Valve is gapped, so it is better not to buy it. View detail
Failure after using Grip-Heater
Grip heater
Smartphone Charging
drive recorder
The above three points were connected.
In the summer, it worked fine.
Grip heater was connected at 7.5A.
It was getting cold and when I turned on the Grip heater, I smelled a burning smell and then the other two points stopped energizing as well.
View detail
I can't get it.
Purchased as a temporary substitute.
When I tried to remove it two weeks later, it was stuck inside the handlebar or something, and no matter how hard I pulled it, it did not move at all, and I could not get it off at all (I had loosened the Screw enough to make it spin).
I struggled with it for about an hour but was frustrated. I gave up trying to pull it out by hand and decided to prepare a tool.
And two weeks after I prepared the tool to pull it out (about $2,000), I pulled it lightly before using the tool. "What? Did you get out of there easily?"
Did leaving it for an extended period of time cause the Rubber to revert back to its original state?
It's good that you got out so easily, but it was expensive.
View detail
Don't buy it, it's very bad, it's not good at all, don't buy it, it's bad, don't buy it, the tax is too high, I paid twice the price of what you bought it for, don't buy it.
Do not buy, very bad, not good at all, do not buy, bad, do not buy, tax is too high, I paid twice the price of the price you bought, do not buy --------------------------- ---------------------------- Don't buy it too bad, it's not good at all, don't get it bad, the tax is too high, I paid twice the price you bought. Powered by Google Translator View detail
Poor operability
When I tried it in the store, I thought it was good, but when I ran with it, it was not easy to control. It is difficult to find the right fit for different shapes even for the same manufacturer. View detail
Poor machining accuracy
I purchased this product to save the trouble of drilling holes for installation, but the pipe diameter is larger than the hole diameter of the OEM parts, and it was not possible for an amateur to install. It seems that special tools and fixtures are required for installation.
In case you are wondering, we tried a universal handlebar made by HURRICANE, but the pipe diameter was appropriate, so it was possible to install it even with amateur work.
View detail
Hardly worth the price.
Compared to other manufacturer's custom parts, I feel that it is cheap for the price, and the material is not good enough for Stem Nut.
Disappointed that the photo and Knob's Design are different.
It is good that the Instruction Manual is handwritten, but I wish the handwriting was a little more Large. It is hard to read.
I bought the Nut type, but the additional nut on top of the Stem Nut is odd in design. Is this attached as an adjuster?
View detail
Gone.
Within a month of using it, the wind blew it away. I only had to put it on and wrap one band around it, so when I came home on a windy day, only the band was left and the Motorcycle was completely naked. View detail
Acceptable as a cosmetic Bolt
When tightened with a Hexagonal Wrench, the Head cracked from the attachment point of the Screw.
I don't think it can be used in places where scattering hangs.
View detail