It asked for the further response of NSR50 and removed the oil pump and the kick. In that case, this seal plug kit is needed as a blind lid. It is very easy, and attachment also unites the socket whose outside diameter suits and is KOTSUN in a pla

It asked for the further response of NSR50 and removed the oil pump and the kick.
In that case, this seal plug kit is needed as a blind lid.
It is very easy, and attachment also unites the socket whose outside diameter suits and is KOTSUN in a plastic hammer.
Although it is used now for two years or more, there are no faults, such as oil leakage.
This product of a kick, and the object for oil pumps and a two-piece set is a recommend at those who consider this reconstruction since the response of a motorcycle also becomes quite good.
There is no place in particular bad as a product. View detail

KDX125SR was equipped. The touch under run changed. A feeling is good. A price also balances the engine performance, and a recommend will be carried out if it changes. Since [ with the bag like a handbag ], it reused.

KDX125SR was equipped.
The touch under run changed.
A feeling is good.
A price also balances the engine performance, and a recommend will be carried out if it changes.
Since [ with the bag like a handbag ], it reused. View detail

Although I am using TM24-MJN of a yoshimura for the ape 100, whenever it tampers with an engine, a gap of a pilot system arises very well. Of course, adjustment is [ a season or altitude ] needed. Since a pilot system comes out notably in the part

Although I am using TM24-MJN of a yoshimura for the ape 100, whenever it tampers with an engine, a gap of a pilot system arises very well.
Of course, adjustment is [ a season or altitude ] needed.
Since a pilot system comes out notably in the partial state also not only during idling but during a run, this pilot jet considers some from a standard size approximately as it is better to purchase.
Since quality is a yoshimura, I think that it is reliable. View detail

This product was seen and purchased while using PC20 for the ape 100. The good point of this product is that adjustment of idling can carry out very comfortably. Little intervals, such as waiting for a signal, can also be adjusted immediately.

This product was seen and purchased while using PC20 for the ape 100.
The good point of this product is that adjustment of idling can carry out very comfortably.
Little intervals, such as waiting for a signal, can also be adjusted immediately.
Structure is also beautiful and the optimal also as dress-up parts.
To the users who are using PC20, it is one article of a recommend by all means. View detail

Although the 115ccLIGHT bore up kit of the kitaco was constructed to the ape 100 and the company's oil cooler kit was used for it, a version up kit is constructed lately, and it is a 115 cc ULTRA-SE head. It became. Although it goes to a usual peak an

Although the 115ccLIGHT bore up kit of the kitaco was constructed to the ape 100 and the company's oil cooler kit was used for it, a version up kit is constructed lately, and it is a 115 cc ULTRA-SE head. It became.
Although it goes to a usual peak and tried to run to it instantly, the condition which an engine cannot blow to high rotation appeared, and it was not speaking.
It thought that this was heat Darre and purchased this super oil cooler kit with bigger capacity.
With good point and beam, a part to have upgraded, and a front oil cooler, as insufficient, even if it continues maintaining high rotation and runs a peak, there is no problem with this oil cooler.
It is comfortable.
I am a meaning which hits the bad point running wind efficiently, and wanted you to make stay so that it can attach upwards to a slight degree.
F fender interferes in attached stay.
This super oil cooler is absolute necessity at a ULTRA-SE head.
Since overheat will not be caused, it is very satisfactory.
In the direction which changed the head, they are goods of a recommend. View detail

In my case, although the original purposes of using this product seem to be the clutch outer of a scooter, and desorption assistance of a pulley, they are used as a baffle in the case of desorption of a flywheel. Although the make of the other company

In my case, although the original purposes of using this product seem to be the clutch outer of a scooter, and desorption assistance of a pulley, they are used as a baffle in the case of desorption of a flywheel.
Although the make of the other company and pure SST were also considered, this product was chosen on account of that it is not a tool used so frequently and a budget.
The diameter of a pin is with phi5.5, phi11, and a distance between pins of 45 mm ~ 145 mm.
Since it is not only for a flywheel although it is comment which work, it may be a little unsteady, but it is OK if it does thoroughly.
Although it is used for flywheel desorption of various vehicle types, it has played the role of a baffle without a problem.
It is preeminent for cost performance.
I thought that good shopping was carried out. View detail

Although inner KSR has passed after manufacture for ten years or more, when it came at hand by medieval times, it was in the state where the trace by which the chain was cleaned is not in sight, but a lube (included garbage ?) is applied to a joint and wh

Although inner KSR has passed after manufacture for ten years or more, when it came at hand by medieval times, it was in the state where the trace by which the chain was cleaned is not in sight, but a lube (included garbage ?) is applied to a joint and which is (getting it blocked).
After applying the pure chain cleaner of a honda, when it did with GOSHIGOSHI with this brush for 1 hour or more, work which may reach the portion of a ring firmly was done.
The power degree could also be simplified single hand, and a degree of freedom is in the range which can be moved rather than the shape of KO, and it was moved easy-to-use by it.
If there is nothing for this work although it will be an accessory although the liquid containing the lube which melted, and garbage hangs down, let's be businesslike.
But it is although KOSOKOSO is schemed [ be / it ] that it should carry out somehow (smile;). View detail

It is a single fundamentally and was not caring even about the brake. It felt and exchanged poor [ of the brake ] running with YZF600 these days in many cases. Old play is lost, it is begun to grasp a lever, and a touch comes immediately. Sinc

It is a single fundamentally and was not caring even about the brake.
It felt and exchanged poor [ of the brake ] running with YZF600 these days in many cases.
Old play is lost, it is begun to grasp a lever, and a touch comes immediately.
Since the same thing also used in the race a long time ago, the inquiry of a corner became pleasant.
There is sense of security which can stop even if it enters with some overspeed.
since -- the jackknife is practiced now. View detail

Although the straight handle is released also from the other company, the first reason for having chosen these goods is the height of completeness. As a handle, it is [ a size (width), a bend angle, construction material, surface preparation, and whic

Although the straight handle is released also from the other company, the first reason for having chosen these goods is the height of completeness.
As a handle, it is [ a size (width), a bend angle, construction material, surface preparation, and which ] very proud of the highest completeness.
Although it is a tendency with many things which carried out the weight saving, such as extra super-duralumin, in recent years, moreover, the stainless mirror finish by a buff directs preeminent texture.
They are goods which brew the above presence and high grade feeling as a handle.
Even if it sees small places, such as chamfering machining of handle end, signs that it is finished each one can be observed carefully.
Although liking divides according to a motorcycle and individual difference in a position, as a handle, the goods of this lineup are things to carry out a recommend very much.
Moreover, although large OFF is the reinforcement which can be said to be conditions most as a handle, the good stainless material is used and it can be said that it is firm without a complaint.
I think that he is a handle manufacturer who strikes and attaches to the direction of the motorcycle thinking carried out gently, such as especially SR, an estrella, etc. View detail

It is obstructive in case of a pure long hose at attachment and detachment of a cap, and since it may separate from the hole of a stainless during a run, this is recommended! There is also no fuel leakage at the time of a fall. Since it stops falling

It is obstructive in case of a pure long hose at attachment and detachment of a cap, and since it may separate from the hole of a stainless during a run, this is recommended! There is also no fuel leakage at the time of a fall.
Since it stops falling out again when a cap is equipped, let's attach so that direction of Z may become straight. View detail

It attached with the vehicles which built the ultra SE115cc kit into the ape 100. It is the camshaft set to a 115-cc kit as optional parts. As comment which incorporated and ran this ULTRA-SE high camshaft, that it can blow going up of high rotati

It attached with the vehicles which built the ultra SE115cc kit into the ape 100.
It is the camshaft set to a 115-cc kit as optional parts.
As comment which incorporated and ran this ULTRA-SE high camshaft, that it can blow going up of high rotation became very good.
Since there were also fairly more overlaps, it was worried about the torque shortage in low rotation, but low-speed torque shortage did not feel, so that it was especially worrisome.
This camshaft understands a difference clearly, when the method of a run which carries out various [ of the high rotation ] is carried out.
It turns to high rotation very pleasantly.
However, when carried out by turning, the exhaust sound became noisier than before.
Although the lightweight rocker arm and the titanium nut are included in my head, I feel that it and a synergetic effect were demonstrated.
I think that it is very one recommended article. View detail

Although it is used for a super sherpa, since the top board is large, lift up can be carried out in comfort. Since neither alignment nor the power which does not need to become so nervous and it breaks in is needed, it uses and there is no stress.

Although it is used for a super sherpa, since the top board is large, lift up can be carried out in comfort.
Since neither alignment nor the power which does not need to become so nervous and it breaks in is needed, it uses and there is no stress.
Anyhow, it is good to be able to raise an order ring simultaneously. View detail

It attached at the D tiger X acquisition date. The blue plate holder was attached to the blue car body, and the image when seen from back also became good. I think whether for it to be sharp and to be sometimes dangerous, if a number plate continu

It attached at the D tiger X acquisition date.
The blue plate holder was attached to the blue car body, and the image when seen from back also became good.
I think whether for it to be sharp and to be sometimes dangerous, if a number plate continues being nakedness, and to play a role also in the durability of a plate, and the theft to tear off.
They are goods which attach and do not have loss absolutely (^^) View detail

Smartness as considered! It is the highest. However, if it resulted in attachment, it was disheartened by difficulty ? of the description and I asked of Schopp.

Smartness as considered! It is the highest.
However, if it resulted in attachment, it was disheartened by difficulty ? of the description and I asked of Schopp. View detail

It is [ ! bright the number LGT which is past parenthesis good (smile) to put it bluntly and say-less, however ] whether the attachment without knowledge is difficult to some extent. Naturally, I left it to Schopp (^^;)

It is [ ! bright the number LGT which is past parenthesis good (smile) to put it bluntly and say-less, however ] whether the attachment without knowledge is difficult to some extent.
Naturally, I left it to Schopp (^^;) View detail

It is used for the digital multi-temp meter of a yoshimura. Since the crawler bearing area of stay and a meter was small, if the meter of a yoshimura can be taken or it moves was worried at the beginning, but it is at the run and meter operation time,

It is used for the digital multi-temp meter of a yoshimura.
Since the crawler bearing area of stay and a meter was small, if the meter of a yoshimura can be taken or it moves was worried at the beginning, but it is at the run and meter operation time, and there was no problem.
Unlike general-purpose stay, a meter is settled finely, and an angle is also PITARRI.
Exclusive stay was used and he was Satoru Taisho. View detail

The place of the standard rear blinker was purchased in order to move beside a number plate, since it extended far back. It was a result cinch although the hole was made in the rear fender letting a cable pass. Although the blinker of the front wa

The place of the standard rear blinker was purchased in order to move beside a number plate, since it extended far back.
It was a result cinch although the hole was made in the rear fender letting a cable pass.
Although the blinker of the front was attached to the place as it is, since the blinker body became small, it turned out that the light is switched on firmly, and the failure of a blinker to erase was lost. View detail

Even Kon is using it by inazuma 1200~XF650 free wind for about two years. Since there was storage space with a key of the helmet (X-11) of a full face and plus alpha although attached also at the time of the Hokkaido touring for two weeks, it was foun

Even Kon is using it by inazuma 1200~XF650 free wind for about two years.
Since there was storage space with a key of the helmet (X-11) of a full face and plus alpha although attached also at the time of the Hokkaido touring for two weeks, it was found useful.
Although it replaces to E470 in connection with the present motorcycle change and is under examination, I think that it is a model with high cost performance, in view of the balance of a size and a price. View detail

a gorilla is custom alike and it is using it. When calling it the height of the accuracy of a G-Craft wide hub, and the beauty of processing, it is already a wonderful word. Joy with which it equips is felt. Since the bolt for disc brake rotor

a gorilla is custom alike and it is using it.
When calling it the height of the accuracy of a G-Craft wide hub, and the beauty of processing, it is already a wonderful word.
Joy with which it equips is felt.
Since the bolt for disc brake rotor wearing is also attached, it is not necessary to another order brand-name parts, and is conscientious.
NSR50 front fork, a G-Craft199mm general-purpose stainless, and Kitaco and 10-inch aluminum cast wheels are combined with this wide hub.
It is the maximum charm that the running stability of a gorilla becomes high with GUTSU with such a combination after all.
If disc brake-ization by 10 inches and a 199-mm general-purpose stainless can be considered, we will recommend you wearing by all means.
Damping force is also raised and it will become high [ a visual degree of satisfaction ]. View detail

It attached to the drag star 400 and the zeal 250. The direction of zeal was attached to the location of the attachment bolt of suspension although the drag star was attached to the location of the hook for original loads. Load hooks increased in

It attached to the drag star 400 and the zeal 250.
The direction of zeal was attached to the location of the attachment bolt of suspension although the drag star was attached to the location of the hook for original loads.
Load hooks increased in number and it became very convenient.
Since it is made to almost all naked motorcycles, this way of attaching is very recommended. View detail