Reviews
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Worth replacing, but a little Delicate (laughs)
Iridium plugs are good! So I decided to give them a try.
I also wondered if I should replace the Plug since I changed it last time and it had 10,000 km on it.
I still think it's a good idea, but I've had the following experiences (laughs).
[I have to replace it.
As performance declines, power down and fuel consumption deteriorates, causing the engine to fail to deliver the performance required of it. 。
Idling malfunction, breathing under acceleration, etc...quite severe malfunction symptoms.
I→ll have to replace it (laughs).
I think there are many people who don't know what is a normal plug, a spark plug, and an iridium plug.
[Spark plug → OEM Plug thing.
The structure of the Spark plug is to promote the ignition of the air mixture by discharging between electrodes.
[Iridium plugs]
Iridium plugs have a narrower tip to prevent sparks from scattering. 。 With ordinary plugs, the discharge is scattered and the center and outer electrodes prevent the growth of flame nuclei, but Iridium plugs suppress such phenomena. In addition, these types use low-wear Windshield IRIDIUM or WhiteGold electrodes, so they do not need to be replaced for up to approximately *100,000 km.
Motorcycles have a higher RPM than cars, so the replacement frequency will be much shorter.
Iridium plugs are a good thing, but Merit and Demerit are not.
[Merit]
◎High ignition performance.
◎Engine performance is drawn out.
◎Plug durability is high.
◎Improvement of fuel economy performance.
◎Smoldering-resistant.
[Demerit]
?High price compared to common Spark plugs, WhiteGoldPlug, etc. →About 3 times the price of Spark plug.
?Maintainability. If the electrode is wet or has a lot of soot (e.g., Carbon) on it, it will need to be cleaned to maintain performance.
?Fuel conditioning may be required.
After about 1,000 kilometers of driving.
Startability has improved. Before, it took 2 or 3 KICKs, but now it's almost always the first one.
Large sturdy, especially when Chalk is pulled and fuel is thickened.
Torque at low to medium speeds is going up.
Even in 5th gear, it now sticks from low rpms. I don't recommend it because it→Knocking (laughs).
It seems that no specific carburetor setting is required.
It seems to be worth the high price.
View detail
Genuine DID Spare Chain Link
I was in need of a few spares for various chains I have in stock and this 520 DZ2 was one of those I stock but have no other spare links. I find it is always good to have spares in stock as even though the original chains do come with a link like this, occasionally they do get damaged and then you are stuck. Finding the right chain link was easy as I just checked down Webike's inventory for the one I wanted. The price Webike have these for is brilliant and better than I could source locally. I did order quite a few different types of chain links as I do stock a lot of various chains anyway. As these were all being shipped together, this also saved on a little postage cost. EMS got my order delivered in 5 days from being shipped. This chain link spare came in a nice DID packaging and was well presented. It came with multiple o-rings and a squish pack of white grease. You can never have enough of that anyway. The chain link is very well made as with all DID chains etc. A nice little stock up is what was needed and I am reassured that I now have spares in case I need them. Thanks Webike. View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
OEM Equivalent Product, cheaper than OEM
Used for LITTLE CUB.
The low beam ran out, and a short time later the high beam also ran out. I bought this one because it was an emergency situation and it was immediately available in stock. The standard is 25-1. The Pine Stripe part number is 1P2015.
The grade of the bulbs is also the same as the OEM, White Hot bulbs, not Halogen.
I also found HalogenType, but the price difference was about three times as much, so I decided to go with the cheaper version.
Replacement is Light rim bottom, Quantity:Pair (for Left and Right) Remove the screw on the Plus of the light rim and lift the light rim upward to remove it.
The Glass part is replaced while touching as little as possible. Time required:2 minutes.
It lit up with no problem. I am relieved. I don't know about the durability yet, but it is a long-established domestic product and I am sure there will be no problem.
View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Product # 1P2004
One of my friends has a rare YAMAHA Town Mate 6 volt motorcycle. He was faced with the problem of finding incandescent headlamps. We are very lucky that this product is available in the webike. The workmanship is good. Great price. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power up by replacing Plug, Power cable and Hyper Ignition Coil!
Installed on SUPER CUB110JA44.
Removing the leg shield was a bit of a hassle, but installation was easy.
If you have about 15 minutes, I think you can do it.
I thought the cord was too long and wasteful for my Motorcycle.
If only it were a little cheaper.
As for the interval of running, since both NGKDXPlug and Mukawa's Hyper Ignition coil were replaced, I think that the ignition is now running smoother and stronger than before, although it is difficult to determine which one is working.
View detail
Fits: MOTOGUZZI NORGE 1200GT, MOTOGUZZI 1200 SPORT, MOTOGUZZI GRISO 1100, MOTOGUZZI BREVA 1100, MOTOGUZZI GRISO850, Others GHEZZI&BRIAN SUPERTWIN1100, Others GHEZZI&BRIAN FURIA, Others G G SPARTACO, YAMAHA XV535DX VIRAGO(Reimport), YAMAHA XV535/S, YAMAHA XS400SP, YAMAHA TY350R, YAMAHA TY250Z, YAMAHA TY250Z SCOTTISH, YAMAHA TY250R, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S LIMITED EDITION, YAMAHA NEWSMATEV50BUSINESSII
Recommendation for first-time maintenance
I have a feeling that the vibration is somewhat Mild, but
The change is quite small.
Single cylinder Motorcycle is easy and nice because it only needs 1 pc.
The work can be done using only on-board tools, and it is inexpensive and time-saving.
This is the first maintenance and recommendation.
View detail
Fits: その他 , HONDA XL250, HONDA XL230, HONDA XL200, HONDA TLM220, HONDA TLM200, HONDA SL230, HONDA MTX250, HONDA Elsinore 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175., HONDA AX-1, YAMAHA DT200 WR, YAMAHA DT200 R, YAMAHA DT-1
Stylish & practical!
[How is it used?
Used on Yamaha's WR155R.
The handlebar to be installed is ZETA's CX Handlebar MX-412.
Was the one you received as per Image?
The product was exactly as shown in the picture.
Was the installation difficult?
Same as normal Grip exchange.
How was your experience with it?
I was looking for a replacement for my OEM Grip that was losing weight and chose one that looked good and functional.
The OffRod Grip is a great bite and the stylish DominoLogo is satisfying.
Wiring ditches are also provided and considered.
If you are going to replace it, I recommend this Grip because the price is not that different from others!
It is nice to be able to choose between Open End and Closed End.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
I've always loved it.
It is thick and easy to grip, and I have been using it for a long time. View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Firm and direct feel
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The material feels firm and provides high grip. I imagine it would perform well in wet weather, too. I would recommend these grips to those who prefer a "direct" feel. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Looks cool too:??
Used for VANVAN75.
Starting performance seems to have improved.
There was no change in maximum speed.
It looks pretty much like it.
View detail