Easy installation, no brightness problems.

Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness. View detail

front pads

Everything was installed well, the quality is good, so far no extraneous sounds, no squeaks, no whistles, no dust, brakes decently, satisfied. I came up, it turns out there are two types of front pads for 100 address, check before purchasing to find out the model year View detail

the best

I came up, it turns out there are two types of front pads for 100 address, check before purchasing to find out the model year View detail

WhiteLight and good looking!

It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light. View detail

Bright and low power consumption

I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling. View detail

Some older Suzuki scooters that are included in the list of compatible models may not be able to be used.

I have a SEA BASS ScooterLOVE and ordered this as a replacement part because the rear brake shoe is worn out.
However, when I lined up the delivered item with the removed shoe, it was clearly unusable because it was almost 1.5 times larger than the original.
This is not an evaluation of the performance of the Brake Shoe itself, but it is a review for all users of this type of older Scooter. View detail

I put it on my RG 50Gamma.

It's just like changing a light bulb.
There is no problem View detail

Cool grips

I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.

I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator View detail

good-tempered

Better than OEM Product
It runs out fast, but I recommend it because of its low price. View detail

It works well for 15,000 km even with heavy use of Brake!

DAYTONA Hyper Sintered Pads have good initial braking and the first shot is effective even in the freezing cold of midwinter. (excluding Race) 。

I use Hyper Sintered Pads which work well right away in the middle of winter and switch to Golden Pads in the heat of summer.

When I say that HYPERSintered works well at the back, I mean that it does not slip out when you grip it as hard as you can, but it works very firmly! HYPERSintered is a little less effective at the back. On the other hand, the Golden Pad has absolute braking power and works well all the way to the back, but only if it is warmed up.

So for STREET in cold weather, Hyper Sintered Pads were my answer with emphasis on initial braking.

Also, in terms of driving style, I don't do full brake at all. If you use full brake a lot, Golden Pad is better.

HYPERSintered is a threat abrasion resistance, even when Brake well used. (Almost no full Brake) I really recommend it because it lasts for 15,000 km. The Pad thickness is thick from the beginning at 5.5mm and 5mm, which is also a factor in its good holding power.


Brake Pads replacement is life-threatening, so be careful. View detail

KITACO Exhaust Gasket

Exhaust Gasket for ADDRESS V100

ADDRESS V100 that needs to remove the chamber not only when replacing the chamber but also when replacing the rear tire.

Buy Exhaust Gasket Stock because I want to keep it.

I have used KITACO products in other vehicles and think they are reliable. View detail

subtle

Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb. View detail

NameValue of brembo

Peace of mind by Brand! The price is also very reasonable! I think it's pretty good. View detail

Product # 25602

This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail

Absolute safety and reliability

D Type on ADDRESSV125 (with a twist) Banjo bolt is K9 (L3=Last model V125) Using OEM, copper Crash washer is 1.5mm thick.

It works well.
Gyuin! and stop.
(I'm not going to put Brake on it and go through the slushy.)

It is made of one piece of steel and is simple to use. There is no possibility of malfunction or failure due to installation errors. Furthermore, it is less than half the price of other companies' products, so there is no other choice but to buy it.

OEMBanjo bolt is made of steel and is Material in case of a fall:It is absolutely safe because it does not crack like aluminum. The banjo part of this product is 8mm thick and the OEM brake hose is 10mm thick. (hole) The orifice position on the banjo was checked to make sure that the orifice position was aligned with the position of the K7 OEMBER bolt. The K7 OEMBE banjo bolt had the orifice positioned a little higher, with a 1mm crash washer on the bolt head side and a 1.5mm crash washer on the caliper side, and the orifice position was perfectly aligned. The bolt length is also perfectly aligned without any collision.

The Goodridge banjo bolt is made of steel, has a low head and good parenthesis, but when I went to see the actual product, I found that the OEM bolt works harder and faster with a little grip because the orifice diameter is twice as large as the ADDRESSV125 OEMB banjo bolt and the brake fluid volume is larger. The OEM brake hose is stronger and faster than the ADDRESSV125OEMBanjo bolt because it discharges more brake fluid. Furthermore, the orifice diameter of the mesh brake hose was also the same. Of course, the limit of the brake hose is the same for both the OEM brake hose and the mesh brake hose, but you can precisely adjust the brake effect according to your grip, and since the hose is not inflated by the pressure, the brake can be applied to the maximum large limit, which means that the brake effect is better.

FTire is IRC MBR740 DIX-RR with high grip. if the Brake works but the tire does not grip, it will slip. The order is to use high grip tire first, then change Hose and Pad.

Was the installation difficult?
This is a difficult category. I did a lot of research beforehand and measured the length of the ADDRESSV125 OEMHose to be 875mm, and the next setting is 850mm after the 900mm length. 900mm is definitely not pulling on the Hose, although it is a little dubby in the front cowl. We also put it through the OEM Guide and Rubber. This is the most important security component, so take your time and be careful.

How was your experience with it?
The best. Outstanding reliability. Hyper Sintered Pads, but they work so well that I thought they had been replaced by Golden Pads! Hyper Sintered Pads, but they work so well that I think they have been replaced by Golden Pads! (works fast). 。
Golden pad and high grip tires are also available.

[Was there anything that disappointed you?
No. I can't help but think that DAYTONA is a good company! I'm sure you will agree with me.
It doesn't matter if it looks tacky or not. Performance supremacy.

Very nice product, thank you. View detail

Headlight LED

Installation was easy. It was brighter than I expected. View detail

The most effective Brake Pads Race warrantee.

[How is it used?
Used for ADDRESSV125. from Street to Circuit.
The front tires should have a high grip to increase safety. (By the way, I wonder if the product Naming is a pun on Cigarette or the old cartoon GoldenBat, or whose intention it is lol)

Was the one you received as per Image?
The 200mm big rotor often needs OEM pad modification, and it is too effective and heavy, which increases the weight under the spring. Caliper is also famous for KX85, but there is no development of Golden Pad, so I will make an Impression separately. (DAYTONAHigh spec line) The mesh brake hose makes the brake work well by pressing the pad hard with a little grip force, and the golden pad and the high grip tire support the pad.

Was the installation difficult?
It is usually difficult and tedious. At first, everyone is a beginner. If you do it slowly and carefully, you can do it. If you can do it, you can do CaliperOH anyway.

How was your experience with it?
The Brake Pads work best, but to get the most performance out of them, you need to run the car for a while to warm up the Brake Pads! Brake Pads work well and stop immediately. Initial Braking (at the beginning of the run/cold) is normal in efficacy.

[Included Parts:were they on?
Pad-only product mix from the beginning.

[Was there anything that disappointed you?
initial braking (mechanism) (at the beginning of the run/cold) The "I" is normal and works well when it warms up, but I would like it to work a little better from the start.

Durability of Pad
It will last 7,000 km even when running very hard and using a lot of brake. The HYPER Syntad Pad will last 12,000 km with heavy brake use and 15,000 km with normal driving. The combination of HYPER Synthad pad, High spec lineMesh brake hose and OEM Caliper will be written in the Impression of High spec line.

[Brake maintenance must be carefully and absolutely checked one by one.
It is the most important safety component for life. View detail

DAYTONA Addressv100 Headlight Bulb

Replaced OEMHeadlight Bulb in Addressv100. Brightness is only a little brighter than OEM, but I am very satisfied. View detail

great greap

I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail

ngk bpr7hs

I bought these ngk candles, I haven't installed them yet, but I will definitely install them next season, they look nice and good, I think they will last me a long time!
-------------------------------------------------- -------- I bought these NGK candles, I have not installed them yet, but I will definitely install them in the next season, they look beautiful and good, I think they will serve me for a long time! Powered by Google Translator View detail