Reviews
Fits: HONDA BENLY50, HONDA CB250R, HONDA CT110 HUNTER CUB, HONDA DAX, HONDA glom, HONDA XELVIS, HONDA Night Hawk, HONDA JADE, HONDA HORNET, HONDA GB250 CLUBMAN, HONDA DREAM, HONDA CL250, HONDA VT400S, HONDA R100 ROADSTER, HONDA GB400, HONDA CB400, HONDA CB400SF, HONDA BROS, YAMAHA RENAISSA, YAMAHA SR250
It's very cost effective.
It is OEMMirror-like enough to be satisfactory for the price.
Plating is clean, mirrors are not distorted, and there is no blurring while driving, so rearward vision is good.
The difference between OEM and Large is that the ROD is shorter (lower) and the black parts that look like shock absorbers are just materials.:It means that it is a Plastic Cover. Of course, there is no way to add a shock absorber at this price, so it makes sense.
Overall, I think this is a good product with high cost performance.
View detail
After 10,000 km
Purchased due to Idling failure. It has been improved. View detail
Directly attached to Ignition coil
As others have said, 250tr has a shorter original IgnitionCable, so I made it the same length and attached it directly.
The cable diameter is thick, so it was installed while shaving it with a cutter as appropriate. This was quite a difficult task.
After installation, I feel a little more power up.
Dress-up can be effective by showing a glimpse of the Yellow-colored Cable.
View detail
Used for ESTRELLA
This is a change from NORMAL. The replacement was made in anticipation of aging deterioration.
I can't really feel the difference, but it looks good, so I'm satisfied.
View detail
Iridium plugs
Iridium plugs have also exploded in ignition! View detail
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
Does not fit the KL250 Sherpa.
The Manufacturer's list of compatible models says it is compatible with KL250 Sherpa, but that's too long.
If installed normally, there will be excess
The quality of the product itself is not bad, so I think it will be fine for cars with longer forks.
KL250 Sherpa's Fork outerTop to bottom of trident is 240mm
Catalogue value WheelTravel is 230mm
100mm remains above the Outer even when shrunk the most without processing.
This would make Stroke about 130mm.
If it was just for Inner Tube protection purposes, it would be fine, but I don't think it is, so I cut it off, even though it will look very ugly lol.
In hindsight, I lightly regret that using the top half wouldn't have made it so ugly.
However, even in this state, the Stroke will be reduced by about 50mm
Boots itself becomes Bump rubber.
Even other companies' products that say they are compatible with KL250 Sherpa are quite long.
Would it be better to just use a shorter product with more extension?
Maybe I'm losing my mind, but I'd like to find a good product!
I bought it + even processed it so I'll be using it for a while lol.
View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
For NGK NGK ESTRELLA
As expected of NGK, it is well made.
Idling was also anteaed.
View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
durability
I use it for its durability.
(10000-30000km)
View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
Fits: SUZUKI DESPELADO, SUZUKI BOULEVARD, SUZUKI MARAUDER, SUZUKI VANVAN, SUZUKI TEMPTER, SUZUKI INTRUDER, YAMAHA Ensiter 125, SUZUKI SAVAGE, YAMAHA FZX750, YAMAHA XV950, YAMAHA R100 ROADSTER, YAMAHA VIRAGO, YAMAHA XV1900, YAMAHA DRUG STAR, YAMAHA Bolt, YAMAHA SR400, YAMAHA SR500, HONDA CTX700N, HONDA CB650, HONDA DREAM
Good cost performance for the production
I think the quality is high for the low price.
The body is a rather heavy gold, and the lens cut is a bit stylish.
I think that the cosmetics of inexpensiveness in relation to price is the strongest.
View detail
Front sprocket replacement
Since the rear sprocket was replaced, the front sprocket was also replaced.
The OEM is 14T because we want acceleration, but this time we will replace the Front with 13T.
Lowering the front sprocket sacrifices fuel economy and top speed, but I want the acceleration that makes it easier to ride with WineDINK….
Nut is a 32mm Socket.
I haven't ridden it yet, but I am looking forward to seeing how it will change.
When I changed the front sprocket, I also purchased the OEM 14T so that I can change it back if the characteristics are too large to fit.
View detail
DAYTONA products are reliable.
I bought this when I replaced the Oil Filler Cap. After installation, there is no oil leakage at all. View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
Installation on xjr1200
I am not sure.
But I feel like I'm getting stronger!
View detail
Fits: SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI BANDIT1200 S, SUZUKI TEMPTER, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman LIMITED, SUZUKI SKYWAVE650 burgman LX, SUZUKI SKYWAVE650 burgman LX, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman LIMITED, SUZUKI SKYWAVE400 burgman LIMITED, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman Type SS, SUZUKI SKYWAVE400 burgman Type S
Replaced due to age
Motorcycle manufactured 11 years ago, so cracks, stretching, etc,
I couldn't figure it out, but I replaced it.
View detail