Reviews
Parts that are worth replacing even in NORMAL.
The handling felt heavy and a bit unmanageable, so I took it to a Motorcycle shop for a checkup.
→Steering's diagnosis was that the Ball in the Bearing was crushed. 。
It is a weak point for the SR400's OEMBearing 。
[Type of SR400OEMSteeringBearing.
...depending on the year Ball type When Angular Type." but both have low resistance but poor rigidity due to point contact.
The angularity used in older models is somewhat better than the normal Ball, but I am still concerned about rigidity.
TaperBearing was then recommended to us.
TaperBearing.
Tapered roller bearings are bearings with a structure that can receive loads generated by rotation (struss load) and axial loads (radial load). 。 The rigidity is increased to accommodate each load.
examples showing the use (of a word) : Tapered Roller Bearings are used for axles, Engine, etc. →Seems to be rigid.
TaperBearing or ball bearing?
Ball bearing→* that which the rolling element is a ball. Ball bearing (Ball bearings)
Roller bearing. (Roller bearings)
Rolling elements are balls or rollers that are incorporated inside the bearing.
[Merit of TaperBearing
◎Handling is prone to rattling under severe use at high speeds, such as on highways and circuits.
Ball bearing→ ball-shaped, so it is weak under load and crushed.
TaperBearing→ Loads are taken up by the "wire" of the Needle, resulting in a larger bearing area, improved durability, and smoother handling. 。
In other words, the load is received in a line→ The load flows as it is because the load direction is a single line.
Effect after replacement
◎I could feel less shaking of the handlebar at high speeds, and could sense that stability had improved.
◎SelfStir can be easily taken out. as Image, put the one in the direction you want to turn lightly, and Image turns smoothly.
◎Push walking became somewhat easier.
By changing to this, we were able to experience an increase in rigidity.
The difference is especially noticeable at high speeds and in situations where the front load increases, such as when driving at high speeds and in situations where the front load increases due to winding.
TaperBearing is a good thing, but it also has its weak points.
[Weaknesses
Due to the increased resistance caused by the surface contact, it is not good in the speed range from very low speeds to street level speeds.
The lightness of the OEM is slightly outweighed by the lightness of the OEM.
Considering MaintenanceCycle and Cost performance, if you judge overall, I think OEM Angular is a good choice for those who ride Main in the city. For those who want to enjoy touring and winding with high speed driving in mind, we definitely recommend the Taper.
*It is better to have the replacement done at a Motorcycle shop if at all possible.
View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power up by replacing Plug, Power cable and Hyper Ignition Coil!
Installed on SUPER CUB110JA44.
Removing the leg shield was a bit of a hassle, but installation was easy.
If you have about 15 minutes, I think you can do it.
I thought the cord was too long and wasteful for my Motorcycle.
If only it were a little cheaper.
As for the interval of running, since both NGKDXPlug and Mukawa's Hyper Ignition coil were replaced, I think that the ignition is now running smoother and stronger than before, although it is difficult to determine which one is working.
View detail
Fits: YAMAHA MR50, YAMAHA POCKE, YAMAHA VOGEL, YAMAHA GT50, YAMAHA GR80, YAMAHA GR50, YAMAHA TY80, YAMAHA TY50, YAMAHA RD50, YAMAHA GT80
Products that are often in short supply
This product used to be cast aluminum, but now it is all aluminum billet. (Cut-out) It is
Perhaps this product is not manufactured by FOR JAPAN MODEL, but somewhere overseas. I don't know if it is because of Corona or the war, but it has been completely unavailable for the past few months, and I bought it when the supply finally resumed.
This lot may have been produced at a different factory, and while there are no problems with use, it is somewhat disappointing that the finished surface of the internal flow channel is rougher than before.
I don't think it will affect the performance, but if you are concerned, you can polish it yourself with Leutor's Paper flapetc.
View detail
Fits: APRILIA GULLIVER50, APRILIA RALLY(AIRCOOL), APRILIA SCARABEO50, DERBI Antorcha・Coppa・Diablo, DERBI FDS・GTS・RD-2, DERBI GranPrix74, DERBI Hunter(D+A), DERBI Olimpica・Savanah・Start, DERBI Sport・Variant・Yumbo, DUCATI 1000MHRmille/S2mille, DUCATI 350XL PANTAH, DUCATI 500SL PANTAH, DUCATI 600SL PANTAH, DUCATI 600TL, DUCATI 650SL PANTAH, DUCATI 750SS IMOLA, DUCATI 750SS, DUCATI 750SS, DUCATI 900MHR, DUCATI 900S2
Powerful and reliable iridium spark plug
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Looks cool too:??
Used for VANVAN75.
Starting performance seems to have improved.
There was no change in maximum speed.
It looks pretty much like it.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
You can feel the increased power.
Installed with Mukawa Hyper Ignition Coil.
I don't know which helped, but it clearly increased power.
Even uphill climbs, which used to be tough, are now a breeze.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
While we're at it!
It had deteriorated, so I decided to use NGKPower cable, which has a proven track record and reliability, while replacing it. I think it is stable. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Replaced with Hyper Ignition Coil.
Replaced with Takegawa's Hyper Ignition Coil.
This can be easily replaced by simply cutting and connecting a long Cable.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
How effective is it?
It is necessary to cut a considerable length of cord, so it takes courage when cutting the cord.
I made it a Red code, which gave it a Custom feel and made it Parenthesis better.
I don't think we should expect anything too large in terms of effectiveness.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Z125PRO is not compatible …
Even Mr. WeBig is not compliant with this product according to the ManufacturerSite.
After installation, I ran a test run for 140 km in various Situations and it was perfectly normal, but I don't know why it doesn't fit;
It is a mystery if any Trouble will occur in due course…
If you don't want to be adventurous, don't buy it;
I wonder if it's a synergistic effect with DXPlug or if it's a placebo effect;
It is a Silicon Red color Cable, so it will be a dress-up in appearance.
It is also true that the price is not so high and the product is out of conformity, so I feel that it is not cosmetically appropriate.
View detail
Fits: YAMAHA YZ50 80, SUZUKI TM75 74, YAMAHA YZ80, YAMAHA YSR80, YAMAHA YSR50, YAMAHA TY80, YAMAHA TY50, YAMAHA JT60, YAMAHA GT80, YAMAHA GT50, YAMAHA FT50, YAMAHA FS-1, SUZUKI TS50HUSTLER, SUZUKI RV50VANVAN, SUZUKI GN50, SUZUKI OM50, SUZUKI JR50, SUZUKI AC50, KAWASAKI KV75
The new Sprocket is the best!
I purchased this product along with Chain to revive my battered YSR80.
Since it was battered and worn out, the running noise became much quieter after the replacement.
Since the number of pins did not change, there was no dramatic change, but I would repeat it again because I am satisfied with both the quality and performance aspects.
View detail
Fits: YAMAHA Neos, YAMAHA Mate Deluxe, YAMAHA YZ100, YAMAHA YV50 Jog, YAMAHA YSR80, YAMAHA YSR80, YAMAHA YSR80, YAMAHA YSR50, YAMAHA YG50ZS Jog Z Stype, YAMAHA YG50ZR Super Jog ZR, YAMAHA YG50Z Super Jog Z, YAMAHA YG50Z Jog Z, YAMAHA YG50EX Jog EX, YAMAHA YG50 Jog, YAMAHA YF80M, YAMAHA YB50, YAMAHA YB50, YAMAHA YB-I, YAMAHA YB-I, YAMAHA XT225S Serow
It's neither good nor bad
I used it on the front brake of my DT50.
First of all, I must mention that the front brake does not work at all in DT50 to begin with.
It works a little at the beginning of the pull, but from there it doesn't work nearly as well when you grip it.
Naturally, this Shoe was also OEMSpec. so it was the same etc.
The only good thing is that there was little reduction...?
I now think that I should have cut a groove or something even if I were to use it.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Good Match with the Red Tank
I am currently customizing a TMX155 into a cafe racer style. I painted the body red. The red plug cord looks good. I can't say anything about the performance yet since it is not yet finished and I haven't test driven it yet. However, I think the look really matches. View detail