Reviews
Fits: APRILIA SX50, HONDA NSR80R, KAWASAKI KZ1000 Police, KAWASAKI LeoStar, PEUGEOT Speed Fight 2 WRC, ROYAL ENFIELD Britt 500, ROYAL ENFIELD BritClassic, ROYAL ENFIELD BritClassic Deluxe 535, ROYAL ENFIELD Lightning Custom 535, YAMAHA 125R, APRILIA SR125, APRILIA SR150, APRILIA Mojito Custom 50, BETA EVO 80 JUNIOR, BETA EVO 80 SENIOR, BETA rr 2t 250 enduro, HONDA CRM250, HONDA CRM250R, HONDA CRM50, HONDA CRM80
watchman
For Stock.
It is a standard product and safe.
View detail
Fits: APRILIA SX50, HONDA NSR80R, KAWASAKI KZ1000 Police, KAWASAKI LeoStar, PEUGEOT Speed Fight 2 WRC, ROYAL ENFIELD Britt 500, ROYAL ENFIELD BritClassic, ROYAL ENFIELD BritClassic Deluxe 535, ROYAL ENFIELD Lightning Custom 535, YAMAHA 125R, APRILIA SR125, APRILIA SR150, APRILIA Mojito Custom 50, BETA EVO 80 JUNIOR, BETA EVO 80 SENIOR, BETA rr 2t 250 enduro, HONDA CRM250, HONDA CRM250R, HONDA CRM50, HONDA CRM80
Plug replacement
Regular Plug replacement for CRM. It is a little bit covered. View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
Fits: YAMAHA TDR80, YAMAHA RZ125, YAMAHA RD125, YAMAHA TZR125, YAMAHA DT125R
CT110 FrontSprocket16T
Thank you for the parts! I can use the CT110 postie for Yamaha! View detail
Used for GSXR125
Used for GSXR-125.
NORMAL428 If you want to change the Front side without changing the Size, XAM's Sprocket is the easiest way to do so.
More economical than 415Conversion.
View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
Fits: APRILIA SX50, HONDA NSR80R, KAWASAKI KZ1000 Police, KAWASAKI LeoStar, PEUGEOT Speed Fight 2 WRC, ROYAL ENFIELD Britt 500, ROYAL ENFIELD BritClassic, ROYAL ENFIELD BritClassic Deluxe 535, ROYAL ENFIELD Lightning Custom 535, YAMAHA 125R, APRILIA SR125, APRILIA SR150, APRILIA Mojito Custom 50, BETA EVO 80 JUNIOR, BETA EVO 80 SENIOR, BETA rr 2t 250 enduro, HONDA CRM250, HONDA CRM250R, HONDA CRM50, HONDA CRM80
Feeling of security
This is an OEM designation for KSR-2.
Since NGK is what we originally used, we don't think there will be a Large difference when we replace it, but it will give us peace of mind.
I will continue to order and use it.
View detail
Braking power up by 1SizeDown from OEMMASTER
The wife of the owner of the vehicle said that she was afraid of braking due to the 20-year-old OEM Master Cylinder, so we decided to replace the OEM MASTER Overhaul with this MASTER. I also wanted to increase the braking power by reducing the size from the Piston type, so I replaced it with the 11mm Piston type MASTER. (Quantity:Pair (for Left and Right) to 1/2-inches→11mm)
The smaller piston size of the Master Cylinder increases the braking force, but the amount of stroke increases, so a change of about 1 size is recommended.
The MAJESTYC I installed is my wife's Motorcycle, and she has a weak grip, so I had a request to make the Brake a little lighter.
The touch was good, and together with the 20 year old Brake hose, which was also changed to Stainless mesh, the Brake looks very nice.
My wife was relieved to hear that it was easier for her to ride as well.
View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
Good looks
I bought a new GSX250R and replaced the tank with a new one, not because there was anything wrong with it, but because I wanted it to look good. I thought it would be cool if the tank was made Radial style. As others have said, when I tried to install the tank, the tank was a little askew and the position of the tank bracket was not quite right. I was disappointed in this point. The installation was easy. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
Fits: APRILIA SX50, HONDA NSR80R, KAWASAKI KZ1000 Police, KAWASAKI LeoStar, PEUGEOT Speed Fight 2 WRC, ROYAL ENFIELD Britt 500, ROYAL ENFIELD BritClassic, ROYAL ENFIELD BritClassic Deluxe 535, ROYAL ENFIELD Lightning Custom 535, YAMAHA 125R, APRILIA SR125, APRILIA SR150, APRILIA Mojito Custom 50, BETA EVO 80 JUNIOR, BETA EVO 80 SENIOR, BETA rr 2t 250 enduro, HONDA CRM250, HONDA CRM250R, HONDA CRM50, HONDA CRM80
good product
The motorcycle plug is a consumable item, so this product is inexpensive and very helpful, and the product is very good and reliable NGK. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power up by replacing Plug, Power cable and Hyper Ignition Coil!
Installed on SUPER CUB110JA44.
Removing the leg shield was a bit of a hassle, but installation was easy.
If you have about 15 minutes, I think you can do it.
I thought the cord was too long and wasteful for my Motorcycle.
If only it were a little cheaper.
As for the interval of running, since both NGKDXPlug and Mukawa's Hyper Ignition coil were replaced, I think that the ignition is now running smoother and stronger than before, although it is difficult to determine which one is working.
View detail
Fits: YAMAHA Cygnus 125, YAMAHA Selo 225S, YAMAHA artesia, YAMAHA YSR50, YAMAHA YSR80, YAMAHA XT250T, YAMAHA XTZ600 Ténéré, YAMAHA TZM50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TDR50, YAMAHA TDR50, YAMAHA TDR80, YAMAHA TDR80, YAMAHA Cerro 225W, YAMAHA DT200R, YAMAHA DT200R, YAMAHA DT125R, YAMAHA DT200R, YAMAHA DT125R
Used for SEROW225
Reliable DAYTONA.
Used in SEROW225 (4JG4).
OEM new disc + OEM Master Cylinder + Red Pad→ not very effective
OEM new disc + YZMaster Cylinder + Golden Pad = Excellent control and effectiveness
View detail
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
Also for Restore of older vehicles.
[How is it used?
I acquired this product as part of the Restore process when I reached middle age, having acquired the vehicle of my dreams that I was unable to obtain during my Blue Spring days, "Run" "Bend" "Stop" The most important of the "Stop" Focusing on NISSIN for Peace of Mind In
Was the one you received as per Image?
It was the equipment that was equipped with Large body on the vehicle that I admired in the Racer replica era from the late 1980's. It was a product just like Image, and I am thankful for the age when we can easily purchase products with higher performance than those days at Motorcycle accessory stores and Webike.
How did it compare to other products?
The comparison was a longing for those of our generation. "Brembo" When YamahaOEM Product It was
Since then, brembo products have become easier to obtain and there is a wider selection of brembo products compared to Nisshin products. Very expensive."
And OEM Product, when I was allowed to test drive a friend's vehicle at that time. It doesn't work very well." I also have a feeling that it would be better to stick with the OEM, which I have always felt was the best way to go. And, above all, it is impossible to get new parts for the 1987 Motorcycle because the manufacturer has stopped selling them.
It's not that we don't have overhaul kits, but it's just not worth the time, effort, and money for something that doesn't work as well as it should...
in the manner of Works great." Affordable prices." Brand for Peace of Mind." The Nisshin brand is the best choice.
[Points to note]
Please check the compatibility with the Brake Caliper and the standard before purchasing.
When installing, be sure to connect and bleed the brake fluid properly, and be sure to install and maintain the brake troublemaker properly, as it can kill you and others.
[Included Parts:were they on?
All images attached on Webike's Site.
[Was there anything that disappointed you?
Nothing at all, so much so that I don't think it should be compared to the OEM time with Caliper. It works as well as it should." They will give it to you, and you will never go back to NORMAL again.
0Other items that may be useful include
Point and hang of installation
Both point and hang. We make sure each task is done right." It is important to
After temporarily assembling this product in the handlebar and aligning the position balance with the lever on the clutch side, firmly install the brake hose and brake caliper to prevent leakage, and be sure to bleed air from the brake fluid.
[ITEMS TO BUY TOGETHER
Let's replace the Brake hose, Caliper, and Pad.
Even if it is a Large kesa, at the very least, you should have new Brake fluid and hose connection washertc.
[Opinions and requests to Manufacturer
More and more people are restoring various old cars on SNS and YouTubeetc. video sites.
I have a feeling that demand will continue to increase in the coming years, and I look forward to the continuation of Lineup for many years to come.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Installed on SKYWAVE250 burgman (CJ43A)
The front master cylinder is deteriorating and I bought it instead of OH.
It has bolt holes for mirrors (with Reserver tank), so it may not be suitable for Cowl mirror cars.
It is more like an OEMSpec. ready-made product sold in Rose than aftermarket parts, and the prices are reasonable.
It is made by NISSIN, a trusted manufacturer, so people who do not want to use cheap Chinese products can rest assured.
Since it is basically an OEMSpec, there is no difference in feel between NORMAL and LARGE, and it is a kind of dress-up parts, but it comes with an adjust lever as a byproduct.
View detail
Fits: YAMAHA Cerro 225W, YAMAHA Selo 225S, YAMAHA CELLOW 225, YAMAHA artesia, YAMAHA Cygnus 125, YAMAHA YSR80, YAMAHA YSR50, YAMAHA XTZ600 Ténéré, YAMAHA XT250T, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TDR80, YAMAHA TDR80, YAMAHA TDR50, YAMAHA TDR50, YAMAHA DT200R, YAMAHA DT200R, YAMAHA DT200R, YAMAHA DT125R
Replace the old one
This is just my personal opinion. I think it is good for city driving, etc. View detail