ACERBIS to Spec. change

My FTR was wearing an ACERBIS Fender, but the shape of the triangle looked awkward when viewed from the front, which was bothersome.
I was planning to buy this product in April, but all the sites said it would arrive in October, so I waited for 6 months and finally bought it.
FTR does not have Up Fender originally, so I had to make it myself from Bracket, but I think it is not that difficult.
I was very satisfied with the natural forme when I put it on and looked at it from the front. View detail

Fender Eliminator Kit

It is the cheapest, but the texture is quite nice. View detail

Tanaka Dax fender

Fitment is great and paint finish is beautiful. Fitted on a USA spec 1970 Honda CT70 that I am converting to Japanese spec. View detail

Over race fenderless kit

I had the other brand of fenderless kit but I couldn't stop buying new one of overacing one Ffenderless kit they all looks pretty same but this one is different Bit pricy but quality of details are perfect and very stud I Love it! View detail

Can Refreshing the Rear

[How is it used?
The state of the OEM was not to my liking,
I installed it immediately.

Was the one you received as per Image?
It was exactly what was listed.

Was the installation difficult?
Torx wrench is required to remove OEM Parts.
Also, since the application of Screw lock is described for tightening,
We prepared this one as well.
DUCATI's License Frame is handled by drilling some holes in the frame,
Double-sided tape fastening without screw tightening was fine.

How was your experience with it?
OEM condition is unknown, but Rear tire sprung Small stone, etc.
Protection film was applied to the Tail lamps.
In addition, the OEMReflector had a crack in the threaded part of the OEMReflector at that time,
Replaced by DAYTONA.
If the Tail cowl is to be removed, it will interfere with the Tail cowl,
The Fender Eliminator must be removed first.

[Included Parts:were they on?
It comes with a handling Instruction Manual and several screws.

[Was there anything that disappointed you?
Not particularly. View detail

Type ordered and …….

It took me a while to do the work because I had to remove and install the tires in order to replace them.
Mr. WeBig…… Do you check the contents of the product once it arrives from the supplier?
It's not the Type I ordered.
I didn't return it because I had to wait quite a while for it to come in and I was happy with either Type, but this is a return item. View detail

ARCHI Fender Eliminator Kit TYPE-3

About quality and texture Strong stainless steel texture with smooth Matt surface About the feeling of use Looks great after installation. Short and clean looking. Products to buy together Archi long tail rear fender with Doremi signal lights. Difficulty of installation Removing the original takes long time then installation. Easy to install and remove this product. Total time is about 20 - 30 minutes Cost performance and comparison with other products Price is a bit steep but cheaper ones are available. But satisfactory with the price is this design product?. About shipping and packaging Shipping price is as item is not huge as well. Package with box brown paper wrapping. Any concerns, cautions, or advice when purchasing Comes with license plate holder, but it's a bit small for the countries. Original license plate light can be installed with original reflector too. View detail

Fairly reasonable price

GSX1300R GSX1300R HAYABUSA Installed on a 1999 model

I don't know what the impact is, but the price of carbon parts from various companies has skyrocketed. (or rather, no longer rampant). In the midst of this trend, the Carbon rear fender can be purchased at a price that is sensibly comparable to conventional fenders.
I don't know if the price is actually going up or not because I don't follow the market.


Design is as you see it.
It covers the rear tire as a rear fender and also covers the drive chain.

There is no problem in terms of accuracy, and if you are not particular about it, it can be ponned as it is.

Personally, I didn't want to damage the Swing Arm, so I put Sponge on the contact surface. I felt guilty about tightening the Carbon directly with the Bolt, so I enlarged the Bolt hole to M8 and installed it by floating it with an M8→M6 conversion collar and RubberWasher, I installed the bolt with some minor modifications.


Functionally, I do not know because I have not yet driven in the rain, but as a Fender, the width is narrow and the antifouling function is a little unsatisfactory.

However, the appearance is SMART for that reason.


The GSX1300R HAYABUSA does not have a Rear Fender in OEM condition, so the Rear view is uncomfortable, especially when the Exhaust System is changed to Single Silencer.
In addition, the difference in texture between the adjacent chain cover and the resin is a concern with many carbon rear fenders, but this product can also serve as a chain cover with just one fender.

So, it is an excellent looking custom product.

The Neck is a Tie Wrap fixation, but there are no screw holes that can be used to fix the Tie Wrap in the first place, so that point is unavoidable.


This was also the first time for me to purchase A-TECH carbon parts, and I was not disappointed with the quality of the carbon.

I think the quality is on the high side, as even Brand products from well-known places can be disappointing.


Although you will probably have to wait for a certain period of time after ordering because it is made-to-order, you should first be thankful that they still lineup custom parts for motorcycles that have been on the market for almost 25 years.
And the price is relatively reasonable. (This is only based on recent trends.)

I can fully recommend this product to others. View detail

Stylish and cool!

PCXStandard Equipment's Rear Fender was too large and bulky, but this Fender Eliminator has a more stylish, reflective look, and I was very satisfied with the large size. View detail

Carefully made, beautiful

It is as if they are Japan's leading CowlManufacturer.
Everyone has their own taste in Design and I like this OEM chic. I also like that it is slightly extended!
Fitting may be a little bit necessary, it depends on the item, but I was able to install it without any modification. I was able to install it without modification. The holes are slightly long, so fine adjustment is possible. View detail

CBRTe600RRTechnicalSportsRacing fenderless

Tail area is nice and Refreshing.
Unfortunately, Silencer's heat shield is fully visible, so a little modification may be necessary.
I am also a little concerned about the angle of the Number because of the car inspection.
The installation of the system can be done with confidence thanks to a detailed Instruction Manual.
The relocation of the Rubber portion of the Blinker may require a bit of hang. View detail

Fender mountstay

It is very good and solidly made! View detail

Genuine Puig Fender Extender for Triumph Tiger 900 GT 2020

The fender extender for the Triumph Tiger 900 GT 2020 model. Finding the orrect part was not hard as I used the tools Webike provide and cross referenced with Puig website. The price from Webike was really good and combined with the shipping I got with adding other parts to the order, this also turned out really good value. Shipping took 5 days and delivered by EMS. The parts were all intact and no damage during shipping. The fender extender itself is made of some slightly flexible material but it does feel very strong. The finsih is a nice smoothed off plastic sayin sheen. All the fisings were included so you don't have to worry about that. This fender extender is basically to help stopp all teh road debris flicking up and either damaging the bike or just keeping mud from teh engine compartment. Very pleased with this purchase after finally ordering. Thanks Webike, great job. View detail

Cosmo

Note that the OEM LED Blinker has a Large Coupler and will not fit through the wiring hole.
Other than that point, I'm glad I bought it. View detail

awesome!

Received the product in a big box with extra protection! Just fitted this on my SR400 and now it looks cleaner than before! quality is good and its easy to install too View detail

OEM Exhaust System will cause interference.

I think it is a good price for a Fender Eliminator Kit, but the blinker interferes with the Exhaust System if it is not an Exhaust System Up Type. View detail

Looks great and works well

Had the shop install this on my Honda CB400SF NC42 (2008 - 2011 non-ABS). Comes with an LED which is required by regulation where I live. Aggressive-ish angle on the plate as shown, and rear reflector hangs down fairly far - but a is big aesthetic improvement over the OEM fender. Would recommend. View detail

SlightRear Fender

Purchased together with a long tail cowl from the same manufacturer.

It also serves as the back mount for the tail lamp and the Fender Eliminator Kit, and the product accuracy, fit, design, and texture are all perfect and of OEM product quality.

I did not use the included base plate because I did not intend to use an OEMReflector.

It takes a little hang to install the blinker, but I was able to install it smoothly because I prepared a Phillips Screwdriver of long length in advance. View detail

PyramidPlastic Red R258 Rear Fender

[Usage]
・Touring

Image Street?
I bought it because I thought it would go well with the OEM color Red RC211VPLOTTypeMotif color.
Finished as per Image.

Is it difficult to install?
Easy
ExactScrew hole fits, not possible, but no machining was required.

How was your experience with it?
I'm satisfied with the results as shown in the Image.

[Included Parts:were they on?
With Mounting Screws and Instruction Manual are only available in English with no illustrations.

[Was there anything that disappointed you?
Nothing in particular.

Rear The part of the suspension that prevents dirt from splashing onto the suspension is not perfect, but it is only slightly less prone to dirt. View detail

great design

Hunter Cub's stock mud guard is smaller than expected
It looked cheap, so I bought it and installed it.
The performance after installation is that the size has increased, allowing it to function as a proper fender, and the design is also excellent.
I plan to purchase additional front guards -------------------------------------------- --------------- Hunter Cub's genuine mud guard is smaller than expected It looked cheap, so I bought it and mounted it. After mounting, the performance is larger, so it is possible to function properly and to design. The front guard will also be purchased Powered by Google Translator View detail