Reviews
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF1000L, HONDA CRF1100L
The texture is perfect!
Installed on MD47.
For long touring, put a rubber on it to prevent vibration.
Remove and use on forest roads.
Can be changed according to the type of Sole of Poots.
I have been waiting for a product like this.
Good choice of colors!
View detail
I am satisfied
I purchased the Silver color.
It is easy to install and replace if you have a hexagonal spanneretc.
The OEM can be pinched and turned by hand to free it, which also prevents some tampering.
Material:Because it is an aluminum product, the very beginner should be careful not to tighten it too much.
Since the OEM product is plastic, aluminum billet parts have been used to improve the texture considerably.
Single item is a world of self-satisfaction, but if used in combination with other fine parts
I think the overall texture will be improved.
Large parts require large machining accuracy and packing material.
I think SP Mukawa will be able to help us in this regard.
I don't know about durability yet, so I'll give it 4 stars.
View detail
Changed from Clip to Crimp
When replacing the chain on the KLX230R, the ERVT came with a clip-type joint, but the clip didn't fit well and I had to press-fit it too much and it failed, so I decided to use a Crimp joint, which I am used to.
I think the Crimp is fine for me, and the Crimp is easier to work with because I'm used to it.
View detail
It is Large strange to remove the Meter.
It was LARGE weird to remove the meter. Pay a labor charge and have a store do it! View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY50, HONDA glom
I can't help but notice the small Dust ….
There is no problem at all with the product itself, and I think it is a very good product if it is applied perfectly. When pasting, I degreased and wiped the surface in advance, and then gently aligned the product while pasting it.
The purpose of this product is to protect the surface of the Meter from scratches, etc. I would like to use it. I will use it as a protection for the surface of the Meter from scratches.
View detail
It will be Accent around the Engine.
There are many similar filler caps available from other manufacturers, but YOSHIMURA's logo is the one point of satisfaction.
I am not sure about the durability, but the cutting accuracy of the screw threads is good and I have no complaints. I think it is a good product.
View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
Fits: SUZUKI 250SB, SUZUKI DJEBEL250XC, KAWASAKI KLX140L, KAWASAKI KLX450R, KAWASAKI KLX300R, KAWASAKI KLX250, KAWASAKI D-TRACKER125, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI VERSYS-X250, KAWASAKI VERSYS-X250 TOURER, KAWASAKI VERSYS-X300, KAWASAKI KFX450R, KAWASAKI KFX700, SUZUKI RMX250S, SUZUKI DR250R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250L(S)
Red is Fashion!
Can be installed with a single screwdriver.
Recommended for dress-up appearance.
Packing was reused.
View detail
Fits: YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA XT250X, YAMAHA XT250, YAMAHA WR450F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250F, YAMAHA TRICKER, YAMAHA SEROW250, HONDA CRF300RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250L(S)
Fashion!
Dress-up!
Installation is easy with a 7mm Spanner or MONKEY.
View detail
Shad click system bracket
Ordered separately as didn't notice it doesn't come with it when ordered the tank bag. Everything is good and works well . View detail
It was cheap but no problem.
One point of view is good to stand out well. View detail
The simple key area becomes luxurious!
I put it on ja65, it's not hard to do, just stick it on with Double-sided Tape.
Since it is a type that covers the key cylinder, it looks more luxurious than one that is attached to the surface (laughs).
I chose Gold because there is also a Gold color around the Front. It gives a sense of unity and makes me feel good!
View detail
For Forest Road Touring
I bought it to enjoy touring in the woods, I also replaced the front fork with a trick fan kit, but I didn't have the confidence to do the work by myself, so I had Technics come in and do it for me.
The NORMAL shock was soft and comfortable to ride on and was very good for toddling along forest roads, but when driving at a slightly better pace, there was a lot of sinking of the Front, especially when decelerating, and I sometimes felt instability. The initial setting of this Rear shock is a little hard and is good for general roads and highways up to forest roads, but I feel it is a little hard on forest roads, so I will try to set it soon. I will try the initial setting of Technics for a while.
The texture is as high as you would expect from an Aluminum Cut-out compared to a Normal shock. The weight is also lighter and slightly lighter. The only thing is that the color of the spring is red for Normal, but this is a Color:Gray, so it is a bit plain.
When changing, not only Rear but also Front is Quantitative.:It would be good to change it with Set.
View detail
To prevent mud clogging
I bought the Chain after seeing someone with a Chain that was stuck in the mud and disconnected.
I think people who often rush into mud as well as Dress-up should purchase this product.
View detail
REBEL250
I am satisfied with the quality of the product, which was comparable to the OEM. View detail
CROSSCUB110/Mounted on JA60
CROSSCUB110 (JA60) The product has been installed in the
However, the supplied boltc. is M8 size, so it cannot be installed as it is.
The handlebar mounting bolt on the CROSS CUB is M6 size, so it will fit.
Bolt×2 pieces of M6 - Collar (Spacer) of M6×Quantity:2pc. Set is the minimum requirement. I bought it from Net mail order because it is not sold in Home center around here. I bought the M6 Washer×Quantity:2pc. Set was also used.
☆ Reference
M6 Bolt…M6 x 45mm Bolt With Hexagon Hole/Half-Screw
M6 color (Spacer) …13X6.2X15
M6 Washer is sold at home centers around the area.
It is not impossible to substitute the M6 collar (Spacer) with the M8 collar that comes with the product, but I bought the M6 one because it might be wobbly.
Quantity of the four Bolts at the Center of the Handlebar Mounting section in the front.:Remove and install the 2pc.
As shown in the photo, JA60 has almost no clearance between the Multi Bar and the Meter, so parts to be attached to the center of the Multi Bar may not be suitable or require some ingenuity.
View detail
Apparently not.
The product was installed by a Motorcycle shop during the initial inspection.
The effect is clearly an increase in low and mid speed Torque, and a sharper Response when the Axel is opened.
The driver can go to the sixth gear when he used to have to drop to the fifth gear.
I had no idea Pipe could make such a difference. The price is reasonable and this is a great buy.
View detail
23CRF250L replaced with WidePeg
WidePegQuantity for OEMAccessories:I gave up and considered alternatives because Set was still an 8 month wait.
I decided to purchase ZETA because I trust the quality of ZETA.
Due to the press-fitted Pin, the Wide effect is reduced compared to the Image of the Body.
Since the OEM footpeg is also quite wide, the actual front-to-back length of the Pin and the OEM footpeg tread width are +10mm.
It is true that it is relatively wide, but it is hard to deny the impression that the Body is unnecessarily large and heavy.
The feel is not bad.
I think it is also possible to shave the AluminumBody as it is and process it into a mountain wave.
I am satisfied because the texture is wonderful, just like ZETA.
View detail
Lightweight skid plate!
This is a light Material:This is a Plastic Skid plate.
But it seems to be quite strong.
I chose ACERBIS Black because I don't intend to use it for hard use like TRIAL or attacking rocky terrain.
The body of the car is Color:Gray and Orange, so Black, the same color as the Frame, blends in well.
The installation went on easily without any positional issues. First, I applied grease to the screws and tightened them once only with screws.
When replacing the Oil, it is necessary to remove it, but it seems to take about 5 minutes.
2023 CRF250L Installed on 8bk-md47.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
Solid for the price.
The installation was easy with the Instruction Manual included.
Since there is no reflector, I installed DAYTONA's Slim reflector on top of it.
View detail