Reviews
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Fits: HONDA CB900, HONDA CBR250R, HONDA CBR250RRR, HONDA VFR400R, HONDA VFR400R Pro Arm, その他 , HONDA AX-1, HONDA CBR400F, HONDA CBR400F F3, HONDA CBR400R AERO, HONDA FT400, HONDA FT500, HONDA NS250F, HONDA NS250R, HONDA NS400R, HONDA VFR400Z, HONDA VT250F SPADA
Bolt
Bolt rusted instantly, but otherwise satisfied. View detail
I knew this was easy to use.
The fabric is thicker and has some stiffness compared to the Simple made by DAYTONA, which I bought last time, but I prefer this one because it feels more protective.
It is easier to have a belt sewn to the cover to prevent it from being rolled up.
The size is a little bit oversized around the rear, but I think the 3L size is good because it can wrap around the entire motorcycle.
View detail
It's worth the price
I think it is a good product. The only thing that bothers me is that the hole for the lock in the back is hard to find. My concern is that it will deteriorate over time. View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Mobility Outclassing!
Used for Initial Model TW.
So far, it's been a regular Plug.
Replaced with this product and startup changed.
I did
The stability during Idling was also increased.
I think
TW is a single cylinder, so it's a good cosmetic choice.
I think
View detail
Size was not suitable for CBR1000RR-R.
[How is it used?
It is used in a covered outdoor parking lot.
I am using it on a CBR1000RR-R, which is listed as a compatible model, but the size is too large.
I think it is also due to the fact that I am using Mirror in a folded state, but the excess part of the Cover contacts the ground quite a bit.
Due to the nature of the product, many people will use it outdoors, but the Cover will stick to the ground when it rains.
[Points to note]
If you are thinking of using it on CBR1000RR-R, we recommend you to buy 1Size or 2SizeSmallest one.
View detail
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
Great product
Fits perfectly on my CB1000SF '94, I am not yet sure though if it's really a one-time use as advertised. Nevertheless, product is great. View detail
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
easy to use
I think the tightness feeling is good. The package is too large. View detail
Fits: HONDA CB750F Bol d'Or II, HONDA fusion, HONDA Wing Custom, HONDA wing, HONDA g, HONDA VT250F Integra, HONDA VF750F, HONDA VF400F Integra, HONDA V45 Magna, HONDA NS400R, HONDA NS250R, HONDA NS250F, HONDA GB500, HONDA GB400, HONDA GB250, HONDA FT500, HONDA CBX750 Horizon, HONDA CBX750F, HONDA CBX250RS, HONDA CBR400F
Red Pad to Hyper pad
I replaced the brake pads with Hyper pads, which are a little cheaper than the Red pads, but they seem to be less durable than the Red pads. The work started with the chamfering of the pad, and it only took about 15 minutes to remove the pad and assemble it. The operation is the same compared to the Red Pad. The durability of the Pad is different from that of the Red Pad. I have tried Vesra and Red Pad, but I feel that the durability is proportional to the price. Also, GB250 CLUBMAN is a 2-pot caliper, so the pad wear is concentrated on the One Side. It seems that it can still be used if it is assembled in the opposite direction, but for safety reasons, I will not do so. View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
Vehicle Inspection Measures
NORMAL H4 will pass vehicle inspections, but for further peace of mind, 60W is labeled as equivalent to 100W.
Highly efficient Type was selected.
I measured the illuminance with a smartphone app and saw that it was up about 20%.
However, the H4 was used for years before replacement, and even if it is NORMAL, replacing it with a new one will pay for itself.
I also think it will increase illumination.
Because of its high efficiency, we are concerned about its durability and would like to evaluate it in the future.
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
error of conformity check
I didn't check the part number I have on it now and placed an order based on the results I got by searching for GN125, and it was non-compliant.
We must not neglect the basics of properly checking what is currently attached. What shall I do with this Plug?
View detail
Fits: KAWASAKI KLE400, YAMAHA YF350E(QUAD), HONDA CB500F, YAMAHA YP250/S/A, YAMAHA YZF1000R/THUNDERACE, YAMAHA YFM350R(QUAD), YAMAHA YF400M-FW(QUAD), YAMAHA XZ550D, YAMAHA XZ400/D, YAMAHA XT250T, YAMAHA XT200, YAMAHA XT125, YAMAHA XS400SP, YAMAHA XS250/S, YAMAHA XS250SP, YAMAHA XJ400/D/SP/Z/Z-S/Z-E, YAMAHA WARRIOR YFM350X(QUAD), YAMAHA TW225/E, YAMAHA TW200, YAMAHA TW200E
Idling!
Idling seems to have stabilized?
It seems as if it does or does not ….
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
I've always loved it.
It is thick and easy to grip, and I have been using it for a long time. View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Firm and direct feel
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The material feels firm and provides high grip. I imagine it would perform well in wet weather, too. I would recommend these grips to those who prefer a "direct" feel. View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
Iridium plugs
It is a good product with good spark flight. View detail
Fits: KAWASAKI W400, HONDA CB1300SB SP, HONDA X-4, HONDA CB1100, HONDA CB1100 typeI, HONDA CB1100 II, HONDA CB1100 EX, HONDA CB1100 BLACK STYLE, HONDA CB1100, HONDA CB1100 EX , HONDA CB1100 EX E Package, HONDA X11, HONDA X11, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000SF-T2, HONDA CBR1000RR, HONDA CBX1000, HONDA CBX1000, HONDA GL1000
Price is reasonable. Heat resistant pad comes in a single piece.
Car models used:TRX850 Size:3L
I have been using Y's Gear Motorcycle Covers with Repeat for almost 20 years, but was attracted to the low price and decided to give it a try.
In conclusion, I should have chosen Y's Gear even if it was expensive. The material texture is cheap, but it looks reasonable from a distance because it is black. It is a pity because I would like to put it on the back. The heat resistant pad is only one piece and does not fit my car which has two Exhaust System. I looked at the product specs again, but the quantity of the heat resistant pad is not written. However, 3L is a Large type for Vehicle, so the standard is 2 pads, right? Also, they made me choose 3L because of the fitment guarantee, but it's too big. Too bad.
View detail