Reviews
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
Genuine DID 420NZ3 Gold Spare Chain Link
I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Rear Sprocket purchased with tooth count change
Purchased to change the number of Chain pieces when changing the number of teeth on the Rear Sprocket. clip type is easy to adjust as it can be removed as many times as needed. View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
Chain assembly
The chain was stretched, so I cut it and used it for reassembly.
Installation does not seem to be that difficult since it is a Clip.
View detail
Not too much or not enough?
The crankcase gasket seems to be thinner than the OEM product, so I have some concerns.
Head Gasket seems to be fine as it is quite firmly. Is the exhaust port gasket thicker than the OEM Product? I am not sure if I can tighten it up as it is because there is too much resistance to crush it and crimp it.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X SR, YAMAHA YD250, YAMAHA YD250S, YAMAHA Cygnus 125, YAMAHA YD125, YAMAHA YD125S, YAMAHA SDR, YAMAHA TZR125, YAMAHA TZR50, SUZUKI Vexter 150., SUZUKI Hustler 50, SUZUKI SW-1, SUZUKI Wolf 50., SUZUKI Koreeda., SUZUKI RG125 gamma, SUZUKI RG50 gamma, SUZUKI GN125E, SUZUKI GS125E, SUZUKI K-125
It's not cheap or bad.
My own ideas on how to choose Motorcycle Covers.
○ First, consider the performance required to protect Motorcycle.
It is not enough to apply a cover to your product. Check the waterproof and water-repellent properties.
Check it out especially if you spend a lot of time parking your motorcycle! After a rain or during the rainy season, the inside of the motorcycle cover tends to get very humid, so a humid environment is not good for your motorcycle. 。 If you remove your Cover every day when commuting to work or school, you may not have to worry about it much, but if you do not ride your motorcycle frequently or frequently, you should choose one with ventilation.
Small scratches when attaching and detaching should be avoided! Can the inside fabric also be protected from Check tampering?
Check here for security. Also, check if there is a hole for a chain lock. It is important that the chain is visible from the outside of the cover!
I bought this based on the above four points.
Certainly the more expensive Covers are superior in durability, etc., but since they are basically outdoors, it is essential that the fabric weaken over time.
I think it is not the price.
good point
○ Water repellent performance of the fabric is sufficient for the need.
○ The bottom of the Cover is open, not sealed, so there is no need to worry about ventilation.
The fabric is smooth and soft TaffetaMaterial, so it will not damage the body of the vehicle.
There is a hole through the ○○ bar type lock.
○ Inexpensive, but with basic functionality.
A bad point
I thought it would only last about 2 years.
Even an expensive Seat will inevitably deteriorate over time, and if we have to replace it eventually, it would be good if it is inexpensive and has basic functionality.
View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
Fits: YAMAHA BRONCO, GASGAS PAMPERA250125, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 WE, YAMAHA SEROW225, YAMAHA XT250X, YAMAHA XTZ125E, YAMAHA TW225E, YAMAHA TW200, YAMAHA TW200E, YAMAHA TT-R125LW, YAMAHA DT50, SUZUKI GRASS TRACKER, KAWASAKI KLX125, HONDA XR50 MOTARD, HONDA XR230, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA TLM220R
ExactlyFit
It is nice to have a Belt that can be fixed to the Center.
It is also very good that the front wheel side can be squeezed.
View detail
Fits: KAWASAKI KS-II, SUZUKI RG50γ [Gamma]., SUZUKI Wolf 50., SUZUKI Hustler 50, YAMAHA XJ900
BPR8ES Even if you can't find it in the store, you can always buy it here!
I couldn't find it in the store and was able to purchase it here.
Thank you
View detail
GRASS TRACKER BIGBOY
BIC BOY's main jet was quite old, so I changed it.
I'm a novice, so I'm going to do my best, even though setting and large is a little bit strange.
View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail