Reviews
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
Does not fit the KL250 Sherpa.
The Manufacturer's list of compatible models says it is compatible with KL250 Sherpa, but that's too long.
If installed normally, there will be excess
The quality of the product itself is not bad, so I think it will be fine for cars with longer forks.
KL250 Sherpa's Fork outerTop to bottom of trident is 240mm
Catalogue value WheelTravel is 230mm
100mm remains above the Outer even when shrunk the most without processing.
This would make Stroke about 130mm.
If it was just for Inner Tube protection purposes, it would be fine, but I don't think it is, so I cut it off, even though it will look very ugly lol.
In hindsight, I lightly regret that using the top half wouldn't have made it so ugly.
However, even in this state, the Stroke will be reduced by about 50mm
Boots itself becomes Bump rubber.
Even other companies' products that say they are compatible with KL250 Sherpa are quite long.
Would it be better to just use a shorter product with more extension?
Maybe I'm losing my mind, but I'd like to find a good product!
I bought it + even processed it so I'll be using it for a while lol.
View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
Mobility Outclassing!
Used for Initial Model TW.
So far, it's been a regular Plug.
Replaced with this product and startup changed.
I did
The stability during Idling was also increased.
I think
TW is a single cylinder, so it's a good cosmetic choice.
I think
View detail
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power up by replacing Plug, Power cable and Hyper Ignition Coil!
Installed on SUPER CUB110JA44.
Removing the leg shield was a bit of a hassle, but installation was easy.
If you have about 15 minutes, I think you can do it.
I thought the cord was too long and wasteful for my Motorcycle.
If only it were a little cheaper.
As for the interval of running, since both NGKDXPlug and Mukawa's Hyper Ignition coil were replaced, I think that the ignition is now running smoother and stronger than before, although it is difficult to determine which one is working.
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
error of conformity check
I didn't check the part number I have on it now and placed an order based on the results I got by searching for GN125, and it was non-compliant.
We must not neglect the basics of properly checking what is currently attached. What shall I do with this Plug?
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
Iridium plugs
It is a good product with good spark flight. View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100EX, HONDA CB1100RS, HONDA CRF1100L(Africa Twin), HONDA CB1000R, HONDA CB1100B, HONDA CB1100C, HONDA CB1100D, HONDA CB1100F, HONDA CB1100R, HONDA CB250N, HONDA CB250T, HONDA CB350 Four, HONDA CB400 Four, HONDA CB400AT (HOWK II), HONDA CB400D (SUPER HOWK III), HONDA CB400LC, HONDA CB400N (HOWK III)
DID Daido VXSeriesJoint link525
[How is it used?
Used for Kawasaki W400
Was the one you received as per Image?
Yes
Was the installation difficult?
Jointed LINKs must be caulked with a caulking tool, Kashimaru-kun in WeBig.
How was your experience with it?
It works fine
[Included Parts:were they on?
No
[Was there anything that disappointed you?
No
Other items that would be helpful
nothing special
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Looks cool too:??
Used for VANVAN75.
Starting performance seems to have improved.
There was no change in maximum speed.
It looks pretty much like it.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
You can feel the increased power.
Installed with Mukawa Hyper Ignition Coil.
I don't know which helped, but it clearly increased power.
Even uphill climbs, which used to be tough, are now a breeze.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
While we're at it!
It had deteriorated, so I decided to use NGKPower cable, which has a proven track record and reliability, while replacing it. I think it is stable. View detail
Fits: HONDA VT500FT Ascot, HONDA Shadow 500, HONDA NV400C SP, HONDA NV400C, HONDA CM450E, HONDA CM450C, HONDA CM450A, HONDA CM400TC, HONDA CM400T, HONDA CM400E, HONDA CM400C Custom, HONDA CM400A, HONDA CM250TB Custom, HONDA CM250T, HONDA CB550SC, HONDA CB450T Hawk, HONDA CB450SC Nighthawk, HONDA CB450SC Nighthawk, HONDA CB450S, HONDA CB450N
old car
I am EXACTLY addicted to my 40+ year old Motorcycle and the Brake has helped restore the effectiveness of the Brake. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Replaced with Hyper Ignition Coil.
Replaced with Takegawa's Hyper Ignition Coil.
This can be easily replaced by simply cutting and connecting a long Cable.
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
To improve startability
[How is it used?
Used for ESTRELLA on Carburetor model.
We replaced the regular NGKPlug with this one to improve winter starting performance and fuel economy.
How was your experience with it?
With Carburetor model ESTRELLA, the heat value is usually number 9, but this time I put in a Plug with a heat value of 8.
There is a model that uses No. 8 Plug for heat value, and in winter when Cylinder also tends to get cold, No. 8 is easier to burn as it is more difficult for heat to escape, and I added it in the hope that it would have the effect of increasing fuel efficiency and stabilizing idling.
I am not sure if lowering the heat value has led to the desired effect, but the idling has also become less rosy than before, and is more stable even at lower idling speeds.
When the weather gets warmer, I will switch back to standard #9 and see how it goes.
How did it compare to other products?
I replaced it with a regular NGKPlug and the starting performance is excellent because it is brand new. Even in winter, I could start the engine by pulling the Chalk, but after changing to Iridium plugs, the time that the Cell is turning seems to be shorter.
[Points to note]
nothing special
Other items that would be helpful
A plug wrench is required for replacement, so if you do not have one, you will need to purchase a tool.
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
nice spark
[How is it used?
I noticed that the same plug had been used for over 10,000 km, so I replaced it. I thought there was no problem before replacing it, but after replacing it, there was a clear difference in the feeling of a nice spark flying DrumstickDrumstick.
Was the one you received as per Image?
I'm afraid to buy it because I heard that in jungle it arrives in an envelope as it is.
Was the installation difficult?
No problem. I have already purchased a Wrench for the Plug and was able to replace it with ease.
How was your experience with it?
I could see the difference just by starting the engine right after the change. I could accel/decel comfortably when running.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
Not particularly
Windshield IRIDIUM seems to have more delicate sparks flying. Generally, it is said to be replaced after 3,000 to 5,000 kilometers, but I thought it would last longer. I thought it would last longer, but after 10,000 km, I could feel that it was getting worn out.
View detail