Reviews
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
KITACO KITACO Non Fade Brake Shoe
2Quantity as it is used for CANOPY:Set was required.
I just installed and used it, so I don't know how durable it is yet.
Brake's gain has improved.
View detail
KITACO Non Fade Brake Shoe
I just installed and used it, so I don't know how durable it is yet.
Brake's gain has improved.
View detail
It works well
This is a 2007 ZOOMER.
The mileage is about 6,000km as I only drive it occasionally, but the Brake squeal was getting worse, so I replaced it.
At first, the effect was not so good, probably due to the lack of hits, but then it started to squeak.
When I disassembled it, I found that it was still on one side, and after licking the perimeter with a file, it looked better.
I am satisfied with the soft but firm feeling of working well.
Durability is not yet known.
View detail
OEM Equivalent Product, cheaper than OEM
Used for LITTLE CUB.
The low beam ran out, and a short time later the high beam also ran out. I bought this one because it was an emergency situation and it was immediately available in stock. The standard is 25-1. The Pine Stripe part number is 1P2015.
The grade of the bulbs is also the same as the OEM, White Hot bulbs, not Halogen.
I also found HalogenType, but the price difference was about three times as much, so I decided to go with the cheaper version.
Replacement is Light rim bottom, Quantity:Pair (for Left and Right) Remove the screw on the Plus of the light rim and lift the light rim upward to remove it.
The Glass part is replaced while touching as little as possible. Time required:2 minutes.
It lit up with no problem. I am relieved. I don't know about the durability yet, but it is a long-established domestic product and I am sure there will be no problem.
View detail
Very good Touch!
This is a 2008 ZOOMER.
The mileage was only about 5,000 km and it was still usable, but it started to squeal and work poorly, so I replaced it with a reliable Daytona.
It took some effort to remove the rear tire nut, but I am satisfied with the soft touch and effectiveness.
Durability will be confirmed in the future.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Product # 1P2004
One of my friends has a rare YAMAHA Town Mate 6 volt motorcycle. He was faced with the problem of finding incandescent headlamps. We are very lucky that this product is available in the webike. The workmanship is good. Great price. View detail
Fits: HONDA ROAD FOX, HONDA LEAD110(EX), HONDA LEAD 50, HONDA LEAD 50, HONDA VOCAL, HONDA BENLY50110PRO, HONDA BENLY50110, HONDA FLUSH, HONDA PAL, HONDA DIO110, HONDA DIO110, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Tacty, HONDA ZOOMERX
Just size for old Motorcycle
HondaA-AF09Courreges TACT used in 85 years.
I was worried about the availability of KITACO products since I have a very old motorcycle, but I am glad that KITACO has their products.
When I removed the Exhaust System and saw it with the original, it was Just size and really helped me out.
The old Gasket is an old 2Cycle and I thought it was too large when I removed it, but it was attached to the exhaust system and I was able to remove it quickly with a slotted screwdriver.
The Gasket itself has the same structure as the OEM parts and is KITACO's product, so we can use it with confidence.
I have only driven about 100Km after installation, but I have tightened the bolts and there is no exhaust leakage.
I would like to say thank you to KITACO for continuing to stock Parts for old cars.
View detail
Fits: HONDA CRF50F, HONDA CRF50F, HONDA DJ-1, HONDA DJ-1, HONDA XR50R (for competition), HONDA XR50R (for competition), HONDA Eve, HONDA Eve, HONDA Eve, HONDA Eve, HONDA Carene, HONDA JOY, HONDA JOY, HONDA SKY, HONDA SQUASH, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT
Brake enhancement of old cars
I used it on a HondaA-AF09Courreges TACT, which is a very old vehicle and the brake wire and meter wireetc. were sticking, but I lubricated it with Oiletc. and it cleaned up and moved normally, but it has not moved for many years so I replaced the brake and shoes for safety. The Brake Wire and Meter Wireetc. were sticking.
The brake shoes had grooves dug in them by KITACO for cooling, which was a big help, and the drum brake tension springs were also included in the kit.
The Shoe is still in the early stages of use and the chamfering of the Shoe was done when it was assembled, but it will be broken in for another 100Km.
Thank you KITACO.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA TLR200, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125, HONDA NSR50, HONDA NSR80, HONDA Super Cub 50, HONDA Super Cub 90, HONDA monkey
Normal is best
It is a standard product that is neither too much nor too little, and can be used with confidence. I haven't tried it yet, but when I replace the Valve, I almost always use this Valve. View detail
Fits: HONDA CRF100F, HONDA CRF100F, HONDA CRF70F, HONDA CRF70F, HONDA CRF80F, HONDA CRF80F, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA TLM50, HONDA TLM50, HONDA XLR80, HONDA XLR80, HONDA XR100R (for competition), HONDA XR100R (for competition), HONDA XR70R, HONDA XR70R
Exchange from OEM
[How is it used?
The XR100R has front and rear drum brakes, and perhaps because I am used to disc brakes, the brakes do not work very well.
I had a near-miss on a forest road when the rear brake didn't work...so I decided to replace it for safety. When I opened the drum, I found that the OEMShoe was still full, but there was a burn mark on it. I opened the drum and found that the OEMShoe was still full, but there was a burnt mark.
How was your experience with it?
The control of the brake has also been improved and it is easier to handle. I haven't driven on forest roads yet, so I will check it out when it gets warmer.
How did it compare to other products?
I considered other Shoes, but the price was lower, so I went with this one.
[Points to note]
It is quite troublesome to replace the shoes, and it is difficult to install the spring that holds the shoes together. Be careful not to skip the spring by mistake.
Don't forget to clean the inside of the Drum as you remove it.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
nothing special
View detail
Fits: HONDA CB125, HONDA CD125., HONDA BENRY CD50, HONDA CD70 (Benly), HONDA Benly CD90, HONDA MT125 Elsinore, HONDA TLR250, HONDA XL125, HONDA XL125, HONDA XL125, HONDA XL200, HONDA XL250, HONDA XL250, HONDA XL250, HONDA XL400R, HONDA XLR250, HONDA CD125., KAWASAKI KL250, SUZUKI GN125, SUZUKI GN250E
Replace from LED
The LEDs look white and are clearly brighter than Halogen, but they seem to be incompatible with the headlight lens and the light seems to be diffused, making it very difficult to see on the road at night. The LEDs are highly visible to oncoming traffic, but DT's Material:Halogen light seems to be a better match for PlasticLens Headlight. The color is a gentle yellowish color, not bright at all! The color is a gentle yellowish color, but nothing more than this is Material:I guess there is a risk of melting PlasticLens with heat.
If we want more than this, we will have to port the XT250X Headlight Assy and use the H4 Valve, so we will wait and see.
View detail
Fits: HONDA Live Dio, HONDA Live Dio ZX, HONDA G', HONDA Dio SR, HONDA TLR200, HONDA HUMMING, HONDA LEAD50SS, HONDA LEAD50R, HONDA Helmet in TACT, HONDA FLUSH, HONDA BEET, HONDA Byte, HONDA HUMMINGG, HONDA TACT FLUMARK, HONDA TACT, HONDA TACT IVY, HONDA TACT, HONDA TACT, HONDA SUPER Dio ZX, HONDA SUPER Dio
Good, better than OEM
[How is it used? For ZOOMER
Was the one you received as per Image? high
Was the installation difficult? LargeIt is durable.
How was your experience with it? It is not comparable to OEMs.
[Included Parts:were they on? Yes
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA ROAD FOX, HONDA LEAD110(EX), HONDA LEAD 50, HONDA LEAD 50, HONDA VOCAL, HONDA BENLY50110PRO, HONDA BENLY50110, HONDA FLUSH, HONDA PAL, HONDA DIO110, HONDA DIO110, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Tacty, HONDA ZOOMERX
Eve Smile
I purchased it because OEMParts is discontinued, and I have installed it and so far there seems to be no problem. View detail
Fits: HONDA Live Dio, HONDA Live Dio ZX, HONDA G', HONDA Dio SR, HONDA TLR200, HONDA HUMMING, HONDA LEAD50SS, HONDA LEAD50R, HONDA Helmet in TACT, HONDA FLUSH, HONDA BEET, HONDA Byte, HONDA HUMMINGG, HONDA TACT FLUMARK, HONDA TACT, HONDA TACT IVY, HONDA TACT, HONDA TACT, HONDA SUPER Dio ZX, HONDA SUPER Dio
Totally better than OEM
[How is it used? Mounted on ZOOMER
Was the one you received as per Image? Yes
Was the installation difficult? I have been working on the "Mendori etc.," and I have been working on it for a long time.
How was your experience with it? Good feeling
[Included Parts:were they on?
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Used for NSR50
Headlight went out and was replaced.
I don't know how bright it is because I basically don't ride at night.
Replacement was easy.
View detail
Fits: HONDA ROAD FOX, HONDA LEAD110(EX), HONDA LEAD 50, HONDA LEAD 50, HONDA VOCAL, HONDA BENLY50110PRO, HONDA BENLY50110, HONDA FLUSH, HONDA PAL, HONDA DIO110, HONDA DIO110, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Tacty, HONDA ZOOMERX
EWound East Exhaust Gasket
The Gasket that arrived was an XH-02 (for RoadFOX) with an inner diameter (about 24?) and outer diameter (about 30?), but the RoadFOX
Exhaust System and Exhaust System dimensions are inside diameter (about 32mm) I made a double winding of the electric wire of the rank of 2 now, and it won't become useless at all.
I use it as a substitute, because RoadFOX itself is not too much, and I think that there is no order in the future, but I think that attention is necessary
I would like to contact you. The HX-02 I purchased was raised at a local Motorcycle shop, so don't feel bad! 。 White Water
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125, HONDA NS50F
Great light! But it's expensive.
CUB's OEM Headlight was crazy dark and my eyesight was deteriorating and I was worried about driving at night, so I installed this one.
The headlight lens was also changed to Multi-reflector, so I was worried about the optical axis, but there was no problem.
I really wanted to use White color, but Valve seems to be blue, so I thought that the whole Headlight is too young to be blue. [Color] I chose Clear and it was the right choice. I thought about using LED but I didn't want it to flicker;
I am satisfied with the product, but the price is too high for the consumables.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
I'm doing my job reasonably well.
Products used in TLRs modified from 6V to 12VSpec.
I don't see any changes compared to the OEMs, or rather, I don't know, since they don't run nearly as much at night.
There is no hindrance in its use. The fact that it does not have any problems means it is a good product.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
I'm doing my job reasonably well.
Products used in TLRs modified from 6V to 12VSpec.
I don't see any changes compared to the OEMs, or rather, I don't know, since they don't run nearly as much at night.
There is no hindrance in its use. The fact that it does not have any problems means it is a good product.
View detail