Reviews
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
Rear brake rotor
When I had my CB750 RC42 inspected, the clerk at Honda Mahaja Super JOGZr Wing Black told me that I should replace the rear brake pad and rear brake rotor because they were worn out, so I bought the parts and replaced them myself. It took a long time to replace them, but it was a much easier replacement than I thought it would be.
It was a very enjoyable holiday. I think the next step is to replace the front brake rotors.
View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
Logo from brembo is good.
Normal disk rotor became thin and was used as a replacement.
I drove about 600km and changed the pads with new brembo pads at the same time, so I think they came on quickly.
Naturally, it stops firmly.
Control is also not a problem.
Now we expect durability.
View detail
I finally bought it.
The Rear disk rotor on my cb750 rc42 was due for replacement, but the OEM was discontinued. I bought the disc rotor from brembo at Timing without hesitation. I bought it without hesitation. I may not be able to install it before the end of this year.
Currently coordinating with Shop.
No complaints about the quality or appearance of the product.
I will give an impression when I install it again.
View detail
SUNSTARPremiumRacing disk rotor Hall Slit Type
[How is it used?
200 km traveled with it installed.
Was the one you received as per Image?
It was just like the Image and very cool!
I also bought Front and Front together, so the front and back together are a great parenthesis!
Was the installation difficult?
Pitches, etc. are the same as CB, so just replace them.
How was your experience with it?
Braking force has increased Control.
[Included Parts:were they on?
Only Body was in the bag.
[Was there anything that disappointed you?
nothing special
It was cooler than I expected.
View detail
The usual K&N, the usual peace of mind.
There are YOSHIMURA and regular MODELs, but the price is almost the same, so of course I chose the YOSHIMURA K&NOil Filter with Sticker.
It's a Brand that's almost like a standard when it comes to oil replacement, so it's a safe place to start.
The rest is with nut, so it can be quickly tightened with a regular Glasses Wrench or Socket.
You don't have to go out of your way to buy Oil Filter tools and save some money.
I did not use the YOSHIMURA Sticker that I received, but I stuck it on something other than Motorcycle as a decoration. Yes, it is YOSHIMURACup. It looks just right.
I have always been attached to K&N's, so when it comes to Oil Filters, I don't want to use anything else, or even think about it.
View detail
The activity is in a confined space and Circuit
[How is it used?
Five times, I think.
How was your experience with it?
Oil used is 10W-40.
Filter wrenchetc. can be attached and detached only with this product without tools. (A special tool is required to remove a filter other than the original one for the first time only.
Even Filterenchi felt it was very easy to attach and detach only the apex of the Filter for a vehicle with a Limit.
I've put it on and taken it off about 5 times, and there was never any trouble with the part where the tool hangs coming off.
How did it compare to other products?
・YAMAHA 5GH-13440-50 https://www.webike.net/sd/25727395/
This product does not have the ease of use that comes with Grease applied to the O-ring section from the beginning.
This product is easier to attach and detach because it requires a Filteren tool, etc.
・K&N KN-204:https://www.webike.net/sd/19861663/
The multicultural head family. it was good enough to buy the one in stock because it was thought that there was only a difference in the attachment of Sticker, but it had been sold out.
・KIJIMA 105-833:https://www.webike.net/sd/20386956/
Magnet is not in this product
Filteren tools are required.
Except for KN-204, the price of this productQuantity:2pc. The Set is equivalent to 3 competing products, which reduces the hassle, but is not Wallet-friendly. In addition to ease of replacement, ease of wiring is also a Merit of this product only.
[Points to note]
As mentioned above, if the original Filter is not this product, a special tool is required to remove it.
View detail
Fits: BETA 450 RR 4T 05-12, HONDA XR 250 L R 91-93, YAMAHA YZ 450 F 03-07, YAMAHA YZ 426 F 02-02, YAMAHA YZ 426 F 00-01, YAMAHA YZ 250 WR 01-02, YAMAHA YZ 250 F WR F 4T 03-06, YAMAHA YZ 250 F WR F 4T 01-02, YAMAHA YZ 250 F WR F 4T 00-00, YAMAHA YZ 250 F 03-06, YAMAHA YZ 125 WR 04-07, YAMAHA YZ 125 WR 03-03, YAMAHA YZ 125 WR 01-02, YAMAHA WR 450 F 12-15, YAMAHA WR 450 F 03-11, YAMAHA WR 426 F 02-02, YAMAHA WR 426 F 00-01, SUZUKI RM 250 Z 07-12, SUZUKI RM 250 Z 04-06, SUZUKI RM 250 96-98
No more heat or fade,Good value
I bought these for my bike. The install went very easy. I tested these immediately the very next day on a twisty road 220 km ride. These brake pads are amazing! They do not squeak, and the stopping power is awesome. Much better than the OEM pads I still had on my bike.I ordered the rear pads and it made a huge difference in stopping power! Now I have ordered the same for the front because these pads seem awesome. Galfer is a brand that I will trust with all my future pad purchases. I don't have a longevity review since I just installed them yesterday but everything so far is great. As always, Webike delivered fast shipping. View detail
Fits: HONDA CB1000R 998cc All, HONDA CB1000R 998cc All, HONDA CB1000R 998cc All, HONDA CB1000R 998cc All, HONDA CB1000R 998cc All, HONDA CB1000R 998cc All, HONDA CB1000R 998cc All, HONDA 919 919cc All, HONDA 919 919cc All, HONDA 919 919cc All, HONDA 919 919cc All, HONDA 919 919cc All, HONDA 919 919cc All, HONDA 599 599cc All, HONDA 599 599cc All, HARLEY-DAVIDSON XG750 STREET 46 CI - All, HARLEY-DAVIDSON XG750 STREET 46 CI - All, HARLEY-DAVIDSON XG750 STREET 46 CI - All, HARLEY-DAVIDSON XG500 STREET 30 CI - All, HARLEY-DAVIDSON XG500 STREET 30 CI - All
K&NOil Filter
[How is it used?
Replace Filter every two Oil changes.
This is the product every time.
How was your experience with it?
I have trusted K&N for a long time and I have no doubt.
Speaking of Filter, K&N is the only choice for compatible car models.
How did it compare to other products?
The hexagonal tip allows the use of a Glasses Wrench or Ratchet for easy replacement.
[Points to note]
Not particularly
View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
Installation on xjr1200
I am not sure.
But I feel like I'm getting stronger!
View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
First DensoPlug
NGK had always been the supplier, so I replaced it with NGK for a trial.
It is not something that can be felt, but I think the starting performance is good.
We believe that Premium components have an added peace of mind fee that regular products do not have, so those who think they are Waste should not buy them.
I like the fact that Gap management is not required.
View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
Batch!
It's helpful because I don't have to search for part numbers myself. View detail
Fits: HONDA AFRICA TWIN, HONDA AFRICA TWIN, HONDA CB400 FOUR, HONDA CB400 FOUR, HONDA CB400 FOUR, HONDA CB400 FOUR, HONDA CB400 FOUR, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB
sounds good
Purchased for $14190
OEM is 15,600 yen, so it is more economical than OEM & SUNSTAR for your peace of mind!
I wanted a HallAndSlit, but decided against it because the price was almost double!
I will bring it in and have a Motorcycle shop do the work, but please note that the bolt that stops the disc is not reusable and must be prepared separately!
I was told that it has a screw lock and that I should prepare a bolt in case it gets burned by the burner.
I simply got a consumable item at a little discount! I'm not looking for performance or anything like that.
In the case of CB400SF, the brake touch can be changed by changing the pad to DAYTONA's Red Pad, so those who are particular about pad, master, caliper, etc. will enjoy changing them.
View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
This is the first time I have chosen DENSO.
I have been using NGK for a long time, but this is the first time I tried DENSO.
The advantage of Iridium plugs is that they do not require Gap Management, so they can be installed right out of the box.
Plugs are consumables, so we were not stingy in replacing them.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
NGK Iridium Spark Plugs for Honda CBX125 1993
A friend wanted an iridium plug for their CBX125 and Webike was the place to get it. This was easy to find using the tools provided by Webike and all the links to the manufacturers websites. They had previously had an iridium installed and wanted to keep to the one they are used to. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The plug arrived in 100% perfect condition. Fired on test and then fitted to the bike. This now makes the bike run as it should and no more bogging down and getting misfires. Very pleased with the result from this plug change. Thank you Webike View detail