Reviews
I made a mistake in my Size selection.
Motorcycles like mine with a Rear Carrier installed should be 1 or 2 sizes larger than the appropriate size.
If this Cover gets damaged, I'll go for 2SizeLarge next time!
View detail
Matching with Caliper
Purchased a 1/2-inches diameter short lever to replace the front caliper with a Brembo crab caliper.
Piston diameter 32mm in combination with Caliper (hydraulic pressure ratio 6.35) is
No Control at all with stiff Touch.
Piston diameter 34mm in combination with Caliper (hydraulic pressure ratio 7.17) is
Good Controllability, although a little softer than the preferred Touch.
If it were a standard Lever, would the former combination have been acceptable?
View detail
Maintenance.
I have not used it yet but the Bolt on the R1 has rusted so I bought it to replace it.
I would recommend everyone to replace it before this happens because it will make the Brake less effective. LOL!
View detail
Size is Exactly
The Size is Exactly and does not flap. It withstood a typhoon by tying up. It is also easy to lock.
Consumables, so they need to be replaced regularly.
View detail
Fits: HONDA CB1100R, HONDA STEED600, HONDA Gold Wing, HONDA VALKYRIE, HONDA CB1300P, HONDA VT250Z, HONDA V-TWIN MAGNA, HONDA VT250 SPADA, HONDA VT250F, HONDA XELVIS, HONDA VTZ250, HONDA Steed400, HONDA RVF400R, HONDA VF400F, HONDA VF400F INTEGRA, HONDA VFR400R, HONDA VFR400Z, HONDA Shadow VLX, HONDA Interceptor, HONDA MAGNA
It is a good product for Choi Custom.
OEM is Material:Plastic and cheap-looking, so I replaced it. Simply Material:The aluminum finish is not aluminum, but a satin-like high quality finish like titanium, so it feels massive for its weight and is very satisfying to look at.
It is Material that is the cautionary tale.:Since the cap is not plastic, it is safe not to touch the cap when the Engine is hot after a stop due to high thermal conductivity. Turn the cap after the engine has cooled down to a certain degree. You may get a slight burn.
OEM is Material:I understand that it is Plastic.
View detail
After 10,000 km
Purchased due to Idling failure. It has been improved. View detail
For CB250F
good quality Oil Filter and great deal from Webike, super fast international shipping, very well packaged and a reasonable price, thanks Webike team great! View detail
Recommended for Gymkhana and police training sessions
It is stuck in the speed range of the Gymkhana and police training sessions. It is also easy to ride in town.
I continue to use the same product, replaced at 15,538 km.
View detail
Directly attached to Ignition coil
As others have said, 250tr has a shorter original IgnitionCable, so I made it the same length and attached it directly.
The cable diameter is thick, so it was installed while shaving it with a cutter as appropriate. This was quite a difficult task.
After installation, I feel a little more power up.
Dress-up can be effective by showing a glimpse of the Yellow-colored Cable.
View detail
Used for MAJESTY 125 FBrakes custom
The MAJESTY125 and R1-Z have the same 83mm Pitch of the front brake caliper, so I used the R1-Z's caliper and changed the front brake to 4POD to strengthen the brake. So, I wanted to lower the Piston size of MASTER, and I wanted to be able to adjust the lever play by Dial as well as CB1300 Caliper, and I wanted to use a short lever. I also wanted to use short lever, so I replaced it with Nisshin's MASTER.
As expected, the brake has improved in both touch and braking power due to the MASTER's smaller-diameter piston size,
Now I have a performance problem on the Caliper side and want to replace the Caliper with the SumitomoCaliper from TZr250 after 3MA or the Nisshin caliper with 83mmPitch released from TZ125, TZ250 and AdvantageNisshin in the 90's. I'm looking for a new caliper.
View detail
A little short, a little thick
I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people.
View detail
Used for ESTRELLA
This is a change from NORMAL. The replacement was made in anticipation of aging deterioration.
I can't really feel the difference, but it looks good, so I'm satisfied.
View detail
Iridium plugs
Iridium plugs have also exploded in ignition! View detail
Good product
Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail
Genuine DID replacement chain link
As I said before, I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERV7 is one I do not surrently have in stock so no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. These chains are generally used on tracxk bikes from a 530 or 525 conversion so I do use a lot of them. As you can imagine, I go through a lot. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
XG250 TRICKER
I use it on my XG250 TRICKER.
The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price.
View detail
Standard, no problem
It is a standard. No problem at all. View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
Fits: HONDA HORNET, HONDA JADE, HONDA VTR250, HONDA VTR250F, HONDA V-TWIN MAGNA250, HONDA VTZ250, HONDA XELVIS
For CB250F
About quality and texture Excellent product About the feeling of use smooth running.quality is good. About shipping and packaging good packaging and fast shipping View detail