Reviews
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
For CB250F
OEM 88 jet size. reasonable price.Very good packaging. Fast shipping. Thanks to the webike team. It Highly recommended. View detail
Fits: HONDA CB125TT P, HONDA CB250, HONDA CB250T LACustom, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA CBR600F, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR929RRFire blade, HONDA CBX750P 2H, HONDA CBX750P 2R, HONDA CBX750P H
Frame plate
This is a frame sticker for HINDA manufacture by country. Genuine product by Honda. Sticker made with good quality material. Made in Japan. Recommended View detail
Fits: YAMAHA Vino, YAMAHA Vino, YAMAHA JOG, YAMAHA JOG, SUZUKI XCH50, HONDA XR125LK, HONDA XR125LEK, HONDA XR125L, HONDA XR125, HONDA XL125, HONDA XL125, HONDA Today, HONDA Today, HONDA Today F, HONDA Tact, HONDA Tact, HONDA Tact Basic, HONDA Tact Basic, HONDA Super Cub50 Pro, HONDA Super Cub50 Pro
usually
I don't know about durability yet, but from the initial feeling, I think it is usually good.
Perhaps asking for more would not make much difference.
View detail
Fits: YAMAHA Vino, YAMAHA Vino, YAMAHA JOG, YAMAHA JOG, SUZUKI XCH50, HONDA XR125LK, HONDA XR125LEK, HONDA XR125L, HONDA XR125, HONDA XL125, HONDA XL125, HONDA Today, HONDA Today, HONDA Today F, HONDA Tact, HONDA Tact, HONDA Tact Basic, HONDA Tact Basic, HONDA Super Cub50 Pro, HONDA Super Cub50 Pro
Cheap!
This is the first time I bought a Brake Shoe, and the good point is that they are inexpensive.
Comparisons with OEM Parts have not yet been made, but I doubt there will be any difference in Large.
If it is in stock and cheap, I think it would be OK.
I don't care about the PAGE, I just want it to be a penny more inexpensive.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CG125, HONDA SUPER CUB, YAMAHA XSR700, YAMAHA MAJESTYS, YAMAHA Tricity155, YAMAHA BirdCity, KAWASAKI BALIUS250, SUZUKI ADDRESSV125, HONDA CROSS CUB, HONDA CBR250RR
Easy installation
I'm happy with the Refreshing because the Tough one doesn't fit around the handlebar of the MOTARD. View detail
Fits: HONDA CB50, HONDA CBX125, HONDA CG125, HONDA CRM50, HONDA CRM50, HONDA CRM80, HONDA CRM80, HONDA MAGNA 50, KAWASAKI D Tracker, KAWASAKI KLX125, KAWASAKI KSR110, KAWASAKI Z125 PRO, KAWASAKI ELIMINATOR 125, SUZUKI RA125, SUZUKI RH250, SUZUKI SX125, SUZUKI SX200, SUZUKI DF125 DJEBEL, SUZUKI DF200 DJEBEL
It works well!
[How is it used?
Front disc brake was replaced to improve its effectiveness.
How was your experience with it?
Braking power was not a good result.
How did it compare to other products?
It works better than NORMAL, but DAYTONA's Red Pad works better.
I think this one is more durable.
[Points to note]
Be careful not to get oil on the surface when installing the unit.
View detail
Fits: HONDA CB125TT P, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CBX125 CUSTOM, HONDA CBX125 CUSTOM, HONDA CBX125 CUSTOM, HONDA CG125, HONDA CG125, HONDA CG125, HONDA CG125, HONDA CL50, HONDA CL50, HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB)
exchange
Blinker not blinking, bulb seemed to be out, so I bought a new one and replaced it. I guess a similar product would be OK, but it is not that expensive, so I replaced it with the same HondaOEM Product. View detail
Fits: YAMAHA YBR125, YAMAHA YBR125 CUSTOM, TRIUMPH SCRAMBLER, TRIUMPH THRUXTON, TRIUMPH THUNDERBIRD, TRIUMPH THUNDERBIRD 1600, TRIUMPH THUNDERBIRD SPORT, TRIUMPH THUNDERBIRD STORM, YAMAHA SR125, YAMAHA SR250, YAMAHA SR400, YAMAHA XJ600, YAMAHA XJR1200, YAMAHA XJR1300, TRIUMPH BONNEVILLE, SUZUKI SV650, SUZUKI GSX750, SUZUKI SV1000, SUZUKI GSX1400, SUZUKI GSX1200
I guess I'll have to choose a design.
I had it on my SR, but it doesn't look right.
I think DucatiMONSTER S2 or Triumph would look good. Or a domestic NAKED.
good point
The windproof performance is high.
It is highly universal.
The design is very large and fits many kinds of cars.
Installation is easy.
A bad point
It is not suitable for some car models.
I think it's a good product as a windshield, although it was a mistake for me. If you have a NEO CLASSIC car, it will definitely look good.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CG125, HONDA SUPER CUB, YAMAHA XSR700, YAMAHA MAJESTYS, YAMAHA Tricity155, YAMAHA BirdCity, KAWASAKI BALIUS250, SUZUKI ADDRESSV125, HONDA CROSS CUB, HONDA CBR250RR
Highly Universal
I bought this to connect my phone and my GoPro, it has a high degree of universalism and can be used in various situations depending on the combination.:In addition to the Set sale, I think one of the attractions of the RAM Mount is that you can buy it in Rose like this one. View detail
Fits: YAMAHA YBR125 CUSTOM, YAMAHA YBR125, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA SR400, YAMAHA XJ600, YAMAHA SR125, YAMAHA SR250, TRIUMPH THUNDERBIRD STORM, TRIUMPH THUNDERBIRD 1600, TRIUMPH THUNDERBIRD SPORT, TRIUMPH THUNDERBIRD, TRIUMPH THRUXTON, TRIUMPH BONNEVILLE T100, TRIUMPH SCRAMBLER, TRIUMPH BONNEVILLE, SUZUKI SV650, SUZUKI GSX750, SUZUKI SV1000, SUZUKI GSX1400
Well, that's it …
Installed on a TVR250 2007. First of all, the Instruction Manual is all English. Although an illustration is attached, it is not easy to see and is not used Bolts. (Do you use it in some cars?) Carbon type is expensive, so I decided to use Black, but my hand blush is noticeable. The fitting of TVR is not so good, but I managed to wear it. The running wind is a little better. View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125 Special Edition, HONDA SH150iS, HONDA SH150iR, HONDA SH150i, HONDA SH150Di, HONDA SH150D Elite, HONDA SH150, HONDA SH125iS, HONDA SH125iD, HONDA SH125iR, HONDA SH125, HONDA SH Mode, HONDA SCV100, HONDA RAVI RAVI
Dust is sticking to the ground.
The braking force and the amount of stepping to lock are better than OEM and easy to handle, but Dust is a little too much. Because it is not easy to fall, even if Drum rotates, it seems that Dust does not escape because it feels like Dust sticks to it, and Dust was attached to the Bear Ring seal. even more so since the meter gear is also available.
The picture I took of the panel that was all burnt brown and cleaned with Brush and Parts cleaner, but it really doesn't flow.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CG125, HONDA SUPER CUB, YAMAHA XSR700, YAMAHA MAJESTYS, YAMAHA Tricity155, YAMAHA BirdCity, KAWASAKI BALIUS250, SUZUKI ADDRESSV125, HONDA CROSS CUB, HONDA CBR250RR
I used it to install it on a place other than Mirror.
The C-type of ZX-9R seemed not to be able to use the STEMCenter hole for the installation of the Smallさく Ram Mount, so this Mirror mountBase was used.
The Separate handle is co-tightened to the angle fixing bolt. It seems to be better if you prepare the Bolt which is long under the neck.
I used it upside down to make sure the meter is not hidden.
In combination with Short arm, I managed to settle into a good spot.
If you have a similar car model, it would be helpful.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR-PRO, DAELIM DLX III Trans Eagle, DAELIM DLX III Trans Eagle, DAELIM DELFINO., DAELIM Cordi 50, DAELIM Altino 125ES, DAELIM Altino 125, DAELIM AS100 Alinto, KAWASAKI KLX125, KAWASAKI Eliminator 125, KAWASAKI D-Tracker, KAWASAKI D-Tracker 125, KAWASAKI BN125 Eliminator 125, HUSQVARNA WXE360, HUSQVARNA WXE350, HUSQVARNA WXE250, HUSQVARNA WXE260, HUSQVARNA WXE125, HUSQVARNA WXC360
I used it on the KSR110
I used it for KSR's rear brake
It's easy to control and works well when you step into it
Push the Piston all the way in, and the abrasive material was Large eye with just the Clearance So Life seems to be long
View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125 Special Edition, HONDA SH150iS, HONDA SH150iR, HONDA SH150i, HONDA SH150Di, HONDA SH150D Elite, HONDA SH150, HONDA SH125iS, HONDA SH125iD, HONDA SH125iR, HONDA SH125, HONDA SH Mode, HONDA SCV100, HONDA RAVI RAVI
As the name suggests, it's the same as the OEMSpecifications same etc
I replaced it while I was replacing the Tire
It's new, so of course it works perfectly
Rear locking is easy to do, too
It works well enough on a rainy day to allow you to break in without worry
Now it's just a matter of how long Life will last …
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CG125, HONDA SUPER CUB, YAMAHA XSR700, YAMAHA MAJESTYS, YAMAHA Tricity155, YAMAHA BirdCity, KAWASAKI BALIUS250, SUZUKI ADDRESSV125, HONDA CROSS CUB, HONDA CBR250RR
Most useful mount by Ram
On a scooter like the Honda Zoomer of Ruckus, there are endless possibilities to attach this 1" ball mount. The primary purpose is for it to be mounted to a mirror stem, which makes the hole size of 9mm a strange choice since most mirrors are 8mm or 10mm fittings. If would have to be drilled out for 10mm and fits too loose for 8mm. I found an unused hole on the left handlebar control on my Honda Ruckus, it's next to the mirror stem and is a perfect position for attaching my cellphone X-Grip holder. As you can see from my picture, the black finish is missing from around the neck (this it when it was new before it was ever mounted). I've noticed a slight dip in quality of more recent Ram products although they are still made in America and function flawlessly. View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CG125, HONDA SUPER CUB, YAMAHA XSR700, YAMAHA MAJESTYS, YAMAHA Tricity155, YAMAHA BirdCity, KAWASAKI BALIUS250, SUZUKI ADDRESSV125, HONDA CROSS CUB, HONDA CBR250RR
a good choice
a good choice It's still a fitting battle, but I'm very satisfied. I think you made a good choice. I'm sure it's worth it. I'll use it well. Thank you. View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CG125, HONDA SUPER CUB, YAMAHA XSR700, YAMAHA MAJESTYS, YAMAHA Tricity155, YAMAHA BirdCity, KAWASAKI BALIUS250, SUZUKI ADDRESSV125, HONDA CROSS CUB, HONDA CBR250RR
Very well, thank you.
be very good Above all, I liked the fast delivery. Although I have not installed it yet, I think I can trust it because it is a very famous product. View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125 Special Edition, HONDA SH150iS, HONDA SH150iR, HONDA SH150i, HONDA SH150Di, HONDA SH150D Elite, HONDA SH150, HONDA SH125iS, HONDA SH125iD, HONDA SH125iR, HONDA SH125, HONDA SH Mode, HONDA SCV100, HONDA RAVI RAVI
It is Repeater.
BESSLER 's Brake Parts reduces Stress in Machine control.
Motorcycle I was the leader who made Riding the most fun for me for over 30 years Brake Pads.
I used different Brands differently, but I arrived at Bessler.
I am sorry that Lineup that also corresponds to old vehicles is not available for my FirstMachine.
View detail
Fits: HONDA XL185 S, HONDA XR80 R, HONDA XR75 K1-, HONDA XL100 S, HONDA TL125 S, HONDA XL75, HONDA XL70, HONDA Z50 A, HONDA CT90 K1-K6, HONDA CT90 K6, HONDA CT90 K1, HONDA MB5S 50, HONDA MB80 RS D, HONDA MBX125 FE, HONDA MBX50 SW, HONDA MT125 K1, HONDA MR50 K1, HONDA MT50 Z, HONDA MTX80 C, HONDA NS125 RK
At Restore
As a restore of NS-1, long ride after fixing
OEM's Bearing was gorigori so I tried inserting Taper roller even in the sense of experiment
First of all, since the area to be hit is different even from the receiving side of Bearing, I think that it contributes to the dispersion of force and is related to the Length of the life span.
As for installation, it is the same as OEM and by saying that Bearing's Outer is press-fitted into the Frame's Stem section
Rubber with Han or the like etc etc. I hit and hit the OEM Outer that I removed.
Bearing is driving in StemRace, but I got on with the removed OEM Outer and hit it with PVC Pipe and inserted it
I assembled Stem into Frame and cut Handlebar, before exchange it had gorigoly feel but it was very pleasant to move to Smooth.
Grease sticks out water resistant Bearing Grease and wipes out if it runs out
I still can not get out of Fork's OH because of the Gold monetary problem but I would like to Impression if there is another opportunity after installation.
View detail