Reviews
I was attracted by the Gold color and bought it, but… I was not sure if it would work or not.
I tried replacing it with a Gixxer 250 Rear pad, but the braking force is much weaker than OEM and relies on the Front brake. it may be a compatibility issue with Caliper, but I can't get used to it, so I'm going back to NORMAL. View detail
Genuine DID 520ERVT Replacement Chain Link
I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERVT is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. I keep the rivet link type and this clip joint type but had ran out of this version, hence the purchase. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
Changed from Clip to Crimp
When replacing the chain on the KLX230R, the ERVT came with a clip-type joint, but the clip didn't fit well and I had to press-fit it too much and it failed, so I decided to use a Crimp joint, which I am used to.
I think the Crimp is fine for me, and the Crimp is easier to work with because I'm used to it.
View detail
I knew it! Brembo!
The Pad that originally came with it was getting very thin, so we replaced it.
At first, I wondered if the stop was worse than before. I thought that it was worse than before, but I drove on.
After running for a while and some heat, it settled down to a smooth stop, just the way I like it.
KTM is a BYBRE Caliper, which means that the braking power is fine, but until now it has felt like it was working too hard for me with the kakkun.
If you are asking if brembo's Pad is unstoppable, rest assured that it is not at all.
The brake system is brembo after all.
View detail
safety
DUCATI SCRAMBLER2020 Rear Wheel Brake
The original pad is from bremboOEM, but we replaced it with this one.
When I first started using it, I was worried that it wouldn't work…? But as I let it sink in, it worked just as described. It works as long as you hold it/step on it." I feel that it is more Mild than OEM.
I think it is suitable for running like adjusting the speed with the rear brake while keeping the RPM low with a tight corner.
As for durability, I don't know since I've only just started using it.
View detail
Reliable Brand
Brembo is now the standard equipment on the upper models, but the red color is very noticeable because of the fine detail on the Brake Pads.
SPMODEL is a product that is not intended for racing, so it can be used on public roads.
The product itself is easy to Control and feels good.
View detail
Genuine R&G Toe Guard for Honda CBR600RR 2010
R&G are a great brand and provide some cracking protection for all models of bikes. They sell a lot for the CBR600RR as these bikes do hit the deck often on track. This toe guard is an essential part when riding on a track as you just do not want your foot or anything in that area in the event of an off. Finding this part number was not too hard as this version does fit a lot of different models and manufacturers. The price from Webike was good value and add with the other items in my basket, I got them all shipped together to save on teh shipping cost. EMS got my order to me in 5 days from shipping. The toe guard is super strong and the bolts that attach this to the swing arm are also really strong. As this is aluminium, it will take a fait bit of hsammer before it gives up the ghost, I know this as I previous;y had one and it took some damage before it eventually snapped. The bolts are threaded really well, the painted finsih is really good and flawless too. Fitted in no time. Very pleased with this and now it will be good to go on the track once again. View detail
Easy to use with OEM Fee Ring
Some pads work with a Snap at the moment of grip, but a pad that works too hard is nerve-wracking when you want to slow down while dragging the Brake a little.
The Pad here has a Fee Ring that is close to OEM and is gentle at the beginning of the grip, making it easy to control the Brake.
Of course, it works well if you hold it firmly.
Breaking has become more enjoyable after adding this pad because it works consistently in a sensible speed range, regardless of weather conditions.
View detail
Expect performance of Rear-specific Compound
Used on F800GS 2013 Rear.
First of all, it looks good.
Not only the back plate, but also the sides of the lining are bremboRed.
I am satisfied with the large size and the change in appearance when installed.
Since it is used for city driving~touring in Maine, it is more important than absolute braking power to have control that allows fine speed adjustment, and to be able to adjust the quantity to the weather conditions.:Pair (for Left and Right) Expect Brake performance that will not be
My impression after driving only about 10 km on the way home from Shop is that the braking performance is sufficient for our needs.
We have a perimeter and would like to explore the differences with the OEMPad from now on.
View detail
Fits: bimota YB-7FORGORE, PIAGGIO X9Amalfi, PIAGGIO X9 200Amalfi, SUZUKI V-STROM650/ABS (reimport), HUSQVARNA TE450, HONDA SONIC125RS(Reimport), HUSQVARNA SM510R, HUSQVARNA SM400R, GILERA RUNNER VXR200 4T, CAGIVA RAPTOR650・V RAPTOR650, KYMCO RACING150, KYMCO RACING125, ADIVA R125, MOTOGUZZI NORGE 1200GT, GILERA NEXUS500 SS, ADIVA N125, KYMCO MOVIE AFI 125, MALAGUTI MADISON150, MALAGUTI MADISON125, MALAGUTI MADISON S200
periodic replacement
I purchased this plug because it is a dedicated Plug designated by Manufacturer. View detail
Fits: BENELLI VELVET125, BENELLI VELVET125, HONDA XR600, Vespa 150ET4, Vespa 50ET2, Vespa 50ET2, YAMAHA BWS100 (Bewith), YAMAHA BWS100 (Bewith), YAMAHA TDR125, YAMAHA Maxstar 125, YAMAHA Maxstar 150, SYM Attila 125, SYM RS-21 150 EFI, YAMAHA Virago 125, APRILIA RS50, BENELLI Velvet125, HONDA XR400R, HONDA XR600, KYMCO TOPBOY100, KYMCO TOP BOY 50
Small but satisfactory
[How is it used?
Installed on a Motorcycle for commuting.
Was the one you received as per Image?
Image
Was the installation difficult?
It was easy to replace the one we were using.
I was careful only there because I could not touch it with my bare hands.
How was your experience with it?
It is darker than before, but it is not a problem because Level is not troubled at night.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
Not so much a disappointment, but the simple packaging made me feel a little uneasy.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Joint link in Chain
I bought RossiMODEL's Chain, but only LINK was fluorescent yellow color, so I bought Silver color as same as other LINK.
I haven't put it on yet, but I think it will be a calming color scheme.
View detail
Fits: その他 , HONDA XL250, HONDA XL230, HONDA XL200, HONDA TLM220, HONDA TLM200, HONDA SL230, HONDA MTX250, HONDA Elsinore 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175., HONDA AX-1, YAMAHA DT200 WR, YAMAHA DT200 R, YAMAHA DT-1
Stylish & practical!
[How is it used?
Used on Yamaha's WR155R.
The handlebar to be installed is ZETA's CX Handlebar MX-412.
Was the one you received as per Image?
The product was exactly as shown in the picture.
Was the installation difficult?
Same as normal Grip exchange.
How was your experience with it?
I was looking for a replacement for my OEM Grip that was losing weight and chose one that looked good and functional.
The OffRod Grip is a great bite and the stylish DominoLogo is satisfying.
Wiring ditches are also provided and considered.
If you are going to replace it, I recommend this Grip because the price is not that different from others!
It is nice to be able to choose between Open End and Closed End.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Fits: INDIAN MOTORCYCLE 1130 SCOUT, INDIAN MOTORCYCLE 1130 SCOUT BOBBER, HYOSUNG RX 450 SM, INDIAN MOTORCYCLE 1000 SCOUT SIXTY, HUSQVARNA VITPILEN 401, HUSQVARNA VITPILEN 701, HUSQVARNA TR650 TERRA, HUSQVARNA TR650 STRADA, HUSQVARNA TE250, HUSQVARNA TE 510, HUSQVARNA TE 510 CENTENNIAL, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TC 510, HUSQVARNA SVARTPILEN 701, HUSQVARNA SMR 630, HUSQVARNA SVARTPILEN 401, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 510R
I am satisfied with the product. (Failed in Spring Sale lol) )
Yaay! If you buy in the afternoon on 3/24, 3,198 yen became 2,962 yen with the Spring Sale, or you bought in the morning! (Lol)
I replaced the front brake pads and now it stops when I snap it, so I'm going to replace the rear brake pads with new ones.
Pull the clamping shaft out to the back, pull the old one out to the front and frame the new one….
Hmmm, it won't fit… I have to push the pot in because it's thicker.
Disc Brake Piston Tools
https://www.webike.net/sd/20205012/
Press back against the
I'm not sure if it's time for an overhaul.
But I thought the exchange was over.
It was originally scuffed up with air biting and completely scuffed up. So, I connected DrainPipe and used a syringe type
https://www.webike.net/sd/1647527/
I did air ejection, but the Brake pedal is too skunky and Fluid is not coming out.
I might be able to get a better one with a Small Type Vacuum pump, but it won't be ready today or tomorrow, and I can't be sure.
I can't help myself today, so that's it.
The next day, I went to Red Baron in Asaichi! (Lol)
I'll write the full story in the shoppreview. (Lol)
View detail
Fits: HUSQVARNA SM 125 S, HUSQVARNA CR 250, HUSQVARNA CR 125, HUSABERG FE400, BMW F800 ST, YAMAHA XT660 Z Terene ABS, YAMAHA XT660 Z Terene, YAMAHA XT 660 X SM, YAMAHA XT 660 R, YAMAHA XC155 MAJESTY S, YAMAHA CYGNUS125 XC125 X, YAMAHA CYGNUS125 XC125 SR, YAMAHA CYGNUS125 XC125 (FI), YAMAHA WR125 X, YAMAHA WR125 R, YAMAHA TT600 S, YAMAHA TT600 R, YAMAHA SMAX, YAMAHA 660 MT-03, VOR SM 530
Cospar good
It improves BrakeFeel compared to the standard Pad. It is also appreciated for its reasonable price and higher abrasion resistance.
The use of the Rear brake will vary from person to person, but I think it is just the right Grade for speed adjustment and use when stopping.
Brake parts are important safety parts, so you will regret later if you choose a brake part made by an appropriate manufacturer.
In the end, using products made by a well-known manufacturer is the safest and cheapest way to go.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Rivet Joint
Is the price going up?
Everything is going up in price.
View detail
Fits: DUCATI HYPERMOTARD1100/S, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R125
It was perfect for Exhaust Protector.
It is sure to be useful to hide scratches on the Exhaust System and as a protector in case of accidental standing up. View detail
Fits: APRILIA Caponord 1200, APRILIA Caponord 1200 Travel Pack, APRILIA Caponord 1200, APRILIA Dorsoduro 1200, APRILIA Dorsoduro 750, APRILIA Dorsoduro 750, APRILIA Dorsoduro Factory, APRILIA Mana 850, APRILIA Pegaso 650 Trial, APRILIA Pegaso 650, APRILIA Pegaso 650ie, APRILIA Pegaso Strada 650, APRILIA RC250, APRILIA SL750 Shiver ABS, APRILIA SL750 Shiver GT ABS, BETA Euro 350, BETA Jonathan 125, BMW C1, BMW C1 125, BMW C1 200
It works fine
Rear Brake Pads for BWS125 were replaced.
It was very well worn and after the replacement it was very good.
The brake fluid had not been replaced after delivery, so the front and rear were replaced as well.
View detail
Fits: KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI RM250, SUZUKI DR200, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, HONDA FTR250, HONDA CRF250R, HONDA AX-1, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500, HONDA CR500
DIDClip joint is stable.
Product Name
DID Daido ERSeries Joint link 520ERVT
Item Number
520ERVT_G&G-FJ
Vehicles
KTM 250EXC-F (2022)
Number of man-hours
About 30 minutes
Why did you choose this product?
Because the Clip has come off.
Was the one you received as per Image?
As per Image.
How was your experience with it?
I still prefer DID Joint link for DID Chain.
The construction is solid and the Gold shine is beautiful.
Clip is easy to fit and perfect.
[Points to note]
If you do not press-fit the Clip firmly when stopping the Clip, the Clip will break.
To apply the supplied Grease.
How did it compare to other products?
I feel comfortably at ease.
Items to buy together
DID Daido:520ERVT_G&G-118FB
ERSeriesChain 520ERVT Gold Includes light press-fit Clip(FJ)Joint
View detail