Reviews
Quality is unquestionable! Personally, it's not good….
Installed on CRF250RLY50.
I had been wondering whether or not to buy it, but I bought it with a bang along with the Brake pedal.
The quality is as expected from Zita, Anodized is beautiful and the CRF letters are Parenthesis nice!
Installation is easy and takes only a few minutes.
The result of the Custom is … hmmm. We also have a Jita Scud Protector installed, but while it has good wind protection, the cover range is so wide that the lever is not noticeable….
I am not sure if it was worth it to replace it, but it seems to be slightly easier to operate, so I'll give it a go,
View detail
Barang original honda tidak pernah mengecewakan belanja di sini apa lagi belanja parts di indo susah semoga terus seperti ini terima kasih View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-)
Installed at the same time as MC41 Bore Up Kit
Clutch feels the same as it did in NORMAL. I'm sure it's not slipping anymore, but... View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB250F, HONDA DN-01, HONDA REBEL250, HONDA CRF250M, HONDA CRF250 RALLY ABS, HONDA CRF250L, HONDA CBR250R, HONDA CRF250 RALLY, HONDA CB250R
Iridium plugs as standard
Tank was shifted sideways and replaced from above. mc41 with ABS View detail
Simple but good performance
It looks good, but the grip is good, so there is no burden when standing due to the grip of the boots and chassis. Installation is very simple and I think it's good because it prevents scratches.About quality and texture View detail
The color match is narrow, but it’s okay.
It is not difficult to attach, but you need to be careful about the location when attaching. Since it is generally thick, the fork cover's role is also high. And it's cool View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB250F, HONDA DN-01, HONDA REBEL250, HONDA CRF250M, HONDA CRF250 RALLY ABS, HONDA CRF250L, HONDA CBR250R, HONDA CRF250 RALLY, HONDA CB250R
CL250Plug replacement
I haven't replaced it yet.
As a backup in case of emergency
I bought it
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250M
The key section is not so tasty.
[How is it used?
I was thinking of customizing it since the key part is Black.
Was the one you received as per Image?
Yes, satisfactory, but a little less thick.
How was your experience with it?
The keys seem to be a little hard to turn, but that doesn't seem to be a problem.
[Points to note]
Double-sided tape is thin, so you may need to be careful when applying it.
How did it compare to other products?
I don't know, I didn't have anything to compare it to.
Other items that would be helpful
None
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Purchased to change the front/rear position of the handlebar.
I bought this to move Handlebar forward.
The description of the product says that it is the largest 8-position, but this product has only one hole in the base, so it is a 4-position.
As a result, I was a little disappointed that it did not move forward as much as I expected.
CRF250RALLY had a problem that when standing on a hard slope, it would be in a position like hanging from a handlebar, and the arms would be cramped.
I was aiming to increase the degree of freedom of the upper body by moving the handlebar, which is shallow and low, forward together with this clamp kit, but it did not work as I had hoped.
However, I have no regrets because of the difference from OEM.
The bolt that holds the key cylinder in place is a special one that can only be turned in the direction of tightening, so it was necessary to make a hole in the bolt and remove it with an extractor. 。
This work is not recommended for those who are not accustomed to using electric drills and the like.
View detail
FOR CB250F
Actually this item i could not found in my country (Emblem，Production 86150-KPG-901). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. highly recomended. View detail
FOR CB250F
Actually I could not find this item in my country (Key, Blank 35121-MAS-G01). Genuine key, reasonable price, good packaging.very nice.Thanks to the webike team.good for the genuine buyers.highly recomended. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
The easiest way to start tuning
If you're not familiar with electrical tuning, you can turn into a professional with this product. You can easily draw electricity by removing the headlights and attaching them. The downside is volume. Reattaching the headlights may require some skill. View detail
I was able to install it on a '22 MT-07 with no problems.
I was able to install it on a '23 MT-07 without any problems, only the HandlebarRight Side is possible.
Since MT-07 is not included in the warranty for this product by DAYTONA, I purchased a longer bar from another manufacturer. However, I was worried that the bar might shake and my phone might fall off when I actually ride the bike, probably because the mirror bracket on the bar is a thin plate.
This product from DAYTONA was comfortable to use because there was almost no rattling or shaking.
I chose the longer bar, but the Quantity:Pair (for Left and Right) It would have been better if it could be slid to "1", or if it was a smartphone 1pc. it would have been better to have a shorter bar.
I thought it would have scored 100 points if the attached color and Bolt color were also Black color.
View detail
Cospa is nice.
O-ring for CROSS CUB (JA45) level gauge
Once a year or so, when oil stains from the threaded part of the Level gauge become noticeable, we replace it.
View detail
Genuine Honda Rear Piston Seal Set for CB1000R 2011
These was a set of replacements for a broken piston seals for the CB1000R I have in the garage. I found that a few of the seals were not in great condition but these ones actually split and deteriorated. I purchased a set so I now have spares if any are still ok already on the bike. I found the correct part using the help pages and links that Webike provide. All with some other parts were shipped and delivered to my door in 5 days. These are small seals and do need a little care when being shipped. No problem at all for Webike, they put them in a nice bubblewrap envelope and were already on the Genuine Honda packet anyway. They were kept flat so there was no damage to the seals. As I already had the caliper apart for servicing, this set of seals were super easy to install. They arrived in perfect condition and had enough flex to be able to seat correctly. All back together and now that is one of the jobs completed. Thanks Webike, great work. View detail
Cost-effective dress-up
I purchased this product because I liked the simple design and more affordable pricing than other companies.
Since the mounting is hexagonal, it is difficult to tamper with by hand like the OEM, and I expect it to be somewhat tamper-proof.
The color of Gold is slightly lighter than Posh and Babyface, but once you get used to seeing it, it doesn't matter much.
The O-Ring is also included, so it can be popped in as is.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
Used for DAX125
I used this product to connect USB to my DAX125. The Bullet Terminal is female for both Plus and Minus. I was thinking of taking the Chassis Earth out of the Minus, but I couldn't get the Chassis Earth around the Handlebar, so I used the terminal of this product. It is convenient to be able to get power supply without using Electro Tap. View detail
Fits: HONDA CRF250L, HONDA CRF250L S, HONDA CRF250RALLY, HONDA CRF250RALLY S
The dress-up effect was quite good.
I wondered whether I should buy it or not because the price is quite expensive even though it is not a part directly related to performance, but I bought it with the momentum of Bonus.
The replacement itself was easy, but since there were no replacement Split Pins, it was a bit large for reuse. Finally, I had to gently turn the Motorcycle on its side to do the work (laugh).
The result is more noticeable and more custom than expected, Parenthesis good!
Even though we are careful not to fall over, it was a good part to purchase in terms of being prepared for any eventuality.
View detail
Fits: HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Heavy.
It is quite heavy. But it's solid.
It looks sturdy, but I wish it had a little more load capacity.
View detail
Fits: Others Universal, HONDA CRF250 RALLY, HONDA CRF250L, HONDA XR400 Motard, HONDA XR250, HONDA XR250MOTARD, HONDA XR230, HONDA FTR, HONDA XL230, HONDA SL230, HONDA XL-DEGREE, HONDA AX-1, HONDA XLR250R, HONDA XLR250BAJA, HONDA CRM250R, HONDA TL125, HONDA TLM220R, HONDA TRANSALP400V, HONDA NC750X, HONDA NC700X
For use in Garage
It is for inside Garage because the fabric is thin. It is good for dust protection. View detail