Reviews
Replace instead of overhaul 20 year old OEM
The MAJESTY 250 OEM Master Cylinder is 20 years old, the paint is peeling, the fluid level window is white and cloudy, and the touch screen is dead. I thought that if I replaced it with OEM, it would be in the same condition again someday, so I replaced it with this one, which has better accuracy and quality.
The original vehicle had some customization done to the exterior, and the replaced handlebars gave it a more custom look.
I am satisfied that the color of the handlebar matches the color of the MASTER and Lever, creating a sense of unity.
Unlike the OEM, the 6-step lever play adjustment is also highly satisfactory.
Also, we are happy to be able to strengthen the brake with the SKULL Helmet principle by lowering the diameter by 1 Size to 11mm, compared to the OEM MASTERPiston diameter of 1/2-inches.
The brake hoses were stainless steel mesh when they were installed, so we did not have to worry about a large increase in stroke volume, and both control and braking power were improved, resulting in a highly satisfactory brake customization.
View detail
Small
I bought it for my BMW R1150GS because it fits VST 1050, but it is smaller than I expected. I bought it knowing that it would not fit over the SIDEPannier, but I did not expect that it would not fit over the Top case either. The storage is compact. View detail
New Master Cylinder while replacing Lever.
[How is it used?
The Yamaha MT-25's Brake lever had been made in China since delivery and I was concerned about rattling.
I was worried about using such a product in Brake, but I was wondering what to do because OEM products are too expensive and other brand products from proper manufacturers are expensive. I was wondering what to do. I realized that if I just refurbished the Master Cylinder, it would solve everything, and I came across this product, which is a NISSIN product with a separate tank.
Was the one you received as per Image?
I have used a different Master Cylinder diameter on a different car model, so it was as per Image.
Was the installation difficult?
In the case of MT-25, of course, there is no need to consider interference with Cowl, so it is almost a simple installation.
The banjo bolt was left in place, and the brake switch was simply replaced since the terminals are exactly the same.
In my case, I had a hard time getting the air out because I had changed to Separate Handlebars.
How was your experience with it?
The OEM and Piston diameter is the same 11mm and the same sideways push, so we did not feel much change in the touch and effectiveness of the Brake.
However, with Lever's new, crisp and accurate, I feel that my peace of mind has increased many times over.
Also, NISSIN Lever's R condition etc. is so exquisite that my fingers do not get sore at all even if I ride for a long time.
It looks better and Repair Parts are readily available, so there is nothing to say about it.
[Included Parts:were they on?
Basic AlmostQuantity:It is a Set, but the Mirror Holder Bolt for M10Pitch 1.25 does not come with it.
Perhaps the M6 Tank fixed Bolt is a mistake.
It just so happened that the original Mirror Holder cap had the same cap, so I was able to use it and get away with it.
[Was there anything that disappointed you?
Not particularly
【Review】
Quantity:Pair (for Left and Right) It is great to be able to refresh the Master Cylinder for about the price of a Lever set.
Anyway, it is very reliable and has the best Touch of Lever and even Adjuster.
I have graduated from the mysterious Chinese Lever and can now ride without hesitation.
View detail
Reliable DAYTONARed Pad
I have been using Red Pad for generations for my city riding and Touring Main Machine, so I didn't feel any particular anxiety.
It seems that the previous owner had DaytonaGolden in his car, and even with the same grip, the Golden felt like it stopped with a final jerk, but the Red Pad feels like it stops naturally with the same deceleration ratio until the end when it stops smoothly, so I prefer the Red Pad for control.
This is a balance of Tire performance, disc, front fork and rider's weight, so please take this as a personal opinion.
View detail
Balance between cosmetics and seminal vesicles
The cost performance is good for the braking power, as there is little reduction in braking power. View detail
To change the oil.
Purchased to replace Element along with Oil replacement.
It was well made and worked fine.
View detail
Standard, no problem
It is a standard. No problem at all. View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
DAYTONAChain beware!
Chain hole is too small to fit Daytona's Chain. View detail
Fits: HONDA Forza300, APRILIA SRV850, BMW C650 GT, HONDA INTEGRA, HONDA Silverwing GT400, HONDA Silverwing GT600, HONDA phase, HONDA foresight, HONDA Forza Si, HONDA Forza Z, HONDA fusion, KAWASAKI Epsilon 250, SUZUKI Sky Wave 250 Type M, SUZUKI Sky Wave 250 Type S, SUZUKI Sky Wave 250 Limited, SUZUKI Sky Wave 400 Type S, SUZUKI Sky Wave 400 Limited, SUZUKI Sky Wave 650LX, SUZUKI Sky Wave SS, YAMAHA TMAX 500
Cover is consumable! I replace it after 2 years.
I always use two layers of cover. The first one is just size, and I put Oversize over it. We recommend LETSCover, which is heat-resistant and flameproof spec! View detail
It depends on how you run it.
With my current driving style, I was able to run 10,000 km per millimeter. Last time I installed the same pad, but the distance was half of this time because I was driving mainly on mountain passes and mountain roads. This time I drove mainly in town. View detail
FOR CB250F
I am happy to work with the webike team.Actually this item i could not found in my country (Mark, Drive Caution 87560MY1701). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
NGK Iridium Spark Plugs for Honda CBF1000 2006
I was going to go for the standard OEM spark plugs for this service but when I saw the price of the iridium ones for the CBF1000, it was a no brainer to get these bad boys. These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 4.I have used iridium plugs before with great success as they seem to fire better than standard. I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice and snug. The plugs themselves are perfect. I have had some plugs befpre from overseas suppliers and generally, one of those had been a dud or just been broken during transit. Not this time. All 100% perfect and fired as they should. They do have a better performance than standard plugs but you would have to be a professional to actually notice the difference of the bat. Once fitted, the bike just feels smoother. Take your time and don't over tighten. One very happy customer. Thanks Webike View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
sv650 is 2L
I bought a L because the fit guarantee said L, but when I put it on, it was BitchBitch's tight-fitting.
It took a while but they accepted the return and repurchased the 2L.
Easy to detach and attach.
Rain does not soak through.
It certainly does not dissolve when attached immediately after an Engine stop.
Good
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
Ease of use is the best
Can be used immediately after returning from touring.
Easy to install and remove
I was looking for a product that satisfied the above two points and found one that looked just right, so I popped it in.
From the results, I'm really glad I bought it.
It is very easy to put on and take off, the cloth is firm, and I am very satisfied. It is a bit pricey, but if you think you can use it for a long time without Stress, it is rather cheap…?
I bought it when I bought a new Motorcycle, but I wish I had bought it sooner.
View detail
Plug is consumable
Used for replacement on vtr250.
Plug on Front side is replaced by shifting Radiator slightly.
The Rear side cannot be replaced without removing the Tank.
It was Large strange, but it blew better after the replacement.
It's not Windshield IRIDIUM or anything like that, so it would be better to effect it on a regular basis.
View detail
subtle
I received it and tried to replace it, but I was worried that the pad pin might break off because it was so tight. I thought there might be a problem with the motorcycle body, but the Caliper was already OH'd and I did some chamfering and firring, but it did not improve the problem. I tried chamfering and firring, but it didn't improve the problem. The cause of the problem was the pad, because I didn't see any drag with a Japanese pad of the same thickness. I trusted brembo, the manufacturer, but I was very disappointed because the accuracy of the pad was poor and it was unusable. I had checked the compatibility of the pad before purchasing it, but it was a disappointing result. View detail
Braking power up by 1SizeDown from OEMMASTER
The wife of the owner of the vehicle said that she was afraid of braking due to the 20-year-old OEM Master Cylinder, so we decided to replace the OEM MASTER Overhaul with this MASTER. I also wanted to increase the braking power by reducing the size from the Piston type, so I replaced it with the 11mm Piston type MASTER. (Quantity:Pair (for Left and Right) to 1/2-inches→11mm)
The smaller piston size of the Master Cylinder increases the braking force, but the amount of stroke increases, so a change of about 1 size is recommended.
The MAJESTYC I installed is my wife's Motorcycle, and she has a weak grip, so I had a request to make the Brake a little lighter.
The touch was good, and together with the 20 year old Brake hose, which was also changed to Stainless mesh, the Brake looks very nice.
My wife was relieved to hear that it was easier for her to ride as well.
View detail
It works goofily!
Used for front brake of XELVIS.
The No Brand pad that had been on the car up to that point was so ineffective that I had to throw it away, even though it was 8 parts high. In comparison, the brembo pads are very controllable, starting to work slowly in accordance with the lever-on force, and finally suppressing it with a strong force. I can now enjoy driving on mountain roads that I had been too scared to drive before.
The color of the Pad is bright Red. A sense of doing Good to get out. brembo's marking is written on the Pad and is clearly visible with a cantilevered Caliper. I have used OEM, Vesla, Red Pad, Golden Pad, etc., and this is the easiest pad to use without feeling insecure. The Fee Ring is similar to the Red Pad, but feels softer and tighter than the Red Pad.
The only thing that seems to be a drawback is the lifespan, which reaches its limit after about 5000 km. This is normal for a Pad, but for some reason the new Element was very thin (about 4mm?). The Pad with 40,000 km without replacement before the replacement had more left. If they made it thicker, it should have a longer life.
View detail
Good looks
I bought a new GSX250R and replaced the tank with a new one, not because there was anything wrong with it, but because I wanted it to look good. I thought it would be cool if the tank was made Radial style. As others have said, when I tried to install the tank, the tank was a little askew and the position of the tank bracket was not quite right. I was disappointed in this point. The installation was easy. View detail
Easy to control
I use this Repeater on my Honda 400X. It is not very effective, but the Touch Fee Ring is very easy to control. I use it for my daily commute and it is easy to use in all weathers and traffic jams. I replaced it after 2.5 years with the OEM and replaced it after 1.5 years with this product. This time I felt that there was a little bit of BALI on the end face of the product, so I removed the BALI on the end face with File. (Is there a slight variation in quality from lot to lot?) View detail