Genuine DID 520ERVT Replacement Chain Link

I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERVT is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. I keep the rivet link type and this clip joint type but had ran out of this version, hence the purchase. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail

Refresh

[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.

Was the one you received as per Image?
Insert it into the mounting hole of the Front Fender. A collar with a brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.

How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.

[Included Parts:were they on?
Not particularly

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Rubber-based parts deteriorate, so it's a good idea to replace them periodically. They also protect the parts, so it is better to replace them before they stop functioning. View detail

exchange

It was off for Screen fixation, so I am repurchasing a new one.
It is sold by HondaOEM Product, which is helpful. View detail

purchasing a spare part

When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product. View detail

For CB250F

.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail

For CB250F

Genuine product FuseF (10A)(MINI 98200-41000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail

Changed from Clip to Crimp

When replacing the chain on the KLX230R, the ERVT came with a clip-type joint, but the clip didn't fit well and I had to press-fit it too much and it failed, so I decided to use a Crimp joint, which I am used to.

I think the Crimp is fine for me, and the Crimp is easier to work with because I'm used to it. View detail

The Swing Arm side was distorted and it was very difficult to install,

The hole positions are the same as OEM, but the thickness may be different, and I had a lot of trouble with the gap in the hole positions when actually installing the product.

As a result, a workaround was to reuse the OEM Bolt. The bundled Bolt could not be used.

However, since the body was used and there were signs that the underbody had been hit, it was a little difficult to tell.

The product itself is secure with a Rubber underside to release impact, and it seems to avoid the Trouble that OEMs would quickly distort.

The product itself is usable, and the installation is a bit of a lost cause, so I gave it 4 stars. View detail

When OEM is not readily available.

I bought this one in stock because the OEM was Timing which was not readily available.

There are naturally no problems with performance, quality, etc., and we have the peace of mind of being a DRC.
Thank you for treating OEM Equivalent Product as a niche for Motocrosser as well.

Racer has a low Oil capacity and will be replaced as soon as possible. View detail

Convenient and lightweight! But low strength

Large change is useful for washing the underside of the Motocrosser!
However, it is so strong that it will bend if you try to start KICK with STAND applied.
If it only supports the weight of the car, there is no problem.
The handlebar can be used as an insert, making it easy to insert into an Axle Shaft. View detail

23CRF250L replaced with WidePeg

WidePegQuantity for OEMAccessories:I gave up and considered alternatives because Set was still an 8 month wait.
I decided to purchase ZETA because I trust the quality of ZETA.
Due to the press-fitted Pin, the Wide effect is reduced compared to the Image of the Body.
Since the OEM footpeg is also quite wide, the actual front-to-back length of the Pin and the OEM footpeg tread width are +10mm.
It is true that it is relatively wide, but it is hard to deny the impression that the Body is unnecessarily large and heavy.
The feel is not bad.
I think it is also possible to shave the AluminumBody as it is and process it into a mountain wave.
I am satisfied because the texture is wonderful, just like ZETA. View detail

just right

The OEMSTAND has large, stable feet, but it cannot be hooked onto a vehicle body, making it difficult to carry.
So I bought this DRC STAND.
As shown in the photo, there are front and rear joints, and one of the joints can be changed longitudinally, so a total of three joints can be used.
Husk TC125 was Just size. View detail

Safety belt! Nice one with a safety belt!

I just take the OEM Pedal and replace it.
The tip must be Foldable.
Ability to fine-tune the tread
Safety Wire must be installed.
was the deciding factor in my purchase.

Of course, there is also the dress-up of the appearance.

However, the Wire part is hooked up to the coolant extraction area, but it was not stepped on due to the somewhat long distance, so I asked one Professional rider to test drive it, Maybe I'm not stepping up to the plate because of Wire..." He pointed out that the

I was embarrassed to see that PRO Riders don't often wear this kind of "clever" equipment....

This is necessary equipment for me who falls and throws. View detail

The quality is still different.

I have previously purchased a cheaper CHINA Exterior Kit. The quality and texture has improved a lot recently, but there are still some problems with the mold or the finish, such as bali, sagging, and deformed holes.

Poly sports' Exterior Kit has none of these problems. The exterior kit is beautifully finished in all areas and can be installed without any worries at all.
I am not too concerned about weather resistance for Motocrosser use, but what about TRAIL?
The Decal Kit will be applied immediately after installation, but it looks fine in terms of texture.
It is not surprising since the company also undertakes OEM for Manufacturer, but from User's point of view, the price is low and it is very helpful.

The fitment is listed as CRF450RX, but CRF250RX is also common, so it is used as is. View detail

Forged, solid feel.

The OEM was slightly bent, so it was replaced. Since the vehicle was used, it was aggravating to refresh these parts!
OEM is in reserve.

It is not a Lever with a particularly adjustable tip, and the Foldable portion does not change functionality all the way to the bottom.
The red color will eventually fade, but the black anodized body part is a good match to the Motorcycle's color!

I think I will replace it again because it bends a lot when I use it Hard. View detail

Screen Fixation

When the screen was removed and re-fixed, it was deformed and could not be reused, so a new screen was purchased and replaced. View detail

Custom Black color

[How is it used?
The current NORMAL is Black, so I bought it to make it Colorful!

Was the one you received as per Image?
Yes, the product was exactly as shown in the Image.
Was the installation difficult?
It was easy to remove the Normal cover, remove the Filter inside, and install it on the purchased product.
How was your experience with it?
The Handlebar area is now brighter.
[Included Parts:were they on?
It was originally a Single Item, so there was no need for it to be a Single Item.
[Was there anything that disappointed you?
There is none
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I had to be careful not to get brake fluid on the body of the car when removing the inner filter and installing it on this purchase.
Instruction Manual is also included in the package, so you should be able to install it with a good look.
I don't have any requests. View detail

Brake hose clamp and Quantity:Blue in Set

WR looks good with Blue parts anyway, Parenthesis is good.:We recommend the Blue color as a set. It is made of high-strength aluminum, so it is hard and does not deform even with large torques, and it does not chip easily. View detail

FOR CB250F

Actually this item i could not found in my country (Emblem，Production 86150-KPG-901). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. highly recomended. View detail

Genuine Honda Rear Piston Seal Set for CB1000R 2011

These was a set of replacements for a broken piston seals for the CB1000R I have in the garage. I found that a few of the seals were not in great condition but these ones actually split and deteriorated. I purchased a set so I now have spares if any are still ok already on the bike. I found the correct part using the help pages and links that Webike provide. All with some other parts were shipped and delivered to my door in 5 days. These are small seals and do need a little care when being shipped. No problem at all for Webike, they put them in a nice bubblewrap envelope and were already on the Genuine Honda packet anyway. They were kept flat so there was no damage to the seals. As I already had the caliper apart for servicing, this set of seals were super easy to install. They arrived in perfect condition and had enough flex to be able to seat correctly. All back together and now that is one of the jobs completed. Thanks Webike, great work. View detail