Reviews
Perfect for dress-up!
The dress-up effect is great.
It also feels right in use.
View detail
I feel like I have more Control.
Inner rotor is made of material.:The design is close to OEM, so I don't feel any discomfort after the replacement. The durability (life span) is yet to be determined.
This is just my subjective opinion, but so far I can't find anything wrong with it. I wish the price was a little lower, but I think that is too much to ask for....
View detail
Small
I bought it for my BMW R1150GS because it fits VST 1050, but it is smaller than I expected. I bought it knowing that it would not fit over the SIDEPannier, but I did not expect that it would not fit over the Top case either. The storage is compact. View detail
MAXAMRotor bolt
Bolt was replaced along with Disc Rotor replacement.
I originally intended to reuse it, but purchased it because the Hex hole was deformed into a gouge.
Quantities of 3-packs:Buy 2 sets
Since it is a KITACO product, quality should not be a problem.
View detail
These are great Custom parts!
FZ750 and FZr750 (2LM) The Front area of the "M" is transplanted and used.
Caliper is a Yamaha Brembo.
I bought this with the intention of just renewing the disc because it was old.
Brake works better than before when I test drive it.
The MASTER is equipped with a Radial for the R1 style, but I usually operate it with one index finger.
Thanks to this, Stress was reduced even in city touring.
View detail
To match the Gold amount up to free shipping.
As per Title, I bought it to get free shipping.
We strictly follow the routine of one in every two Oil changes, so this is fine.
This one also has an O-ring attached, which is convenient.
There were two types of large O-rings in the package. I used the one with the smaller diameter wire, but I think it is fine.
Is it because of these two types of O-rings that I feel like there are so many compatible car models listed?
A certain "Kansai Soul", which is only cheap, is poorly made, but I think this one can be used with peace of mind.
View detail
HURRICANE triangular table spindle nut
Exquisite workmanship, cheap price, good materials, beautiful colors, very accurate size, easy to install, and fits perfectly in the car View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
High sense of security
The fabric is firm and sturdy, so you don't have to worry even in Large rain. The weight is not as heavy as I thought it would be, but rather it is a good weight that is not likely to be easily blown away by the wind. View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
I wonder if the hardness will engulf the sand.
Since it is thick and not flexible, sand etc. will be caught by the wind from under the Seat and will dance inside the Seat when it is near a field, etc. It prevents rain, but when the wind blows, rain will naturally enter from underneath and dance inside the thick Covers. It prevents rain, but when the wind blows, rain naturally enters from below and dances inside the thick cover, making it quite damp. When the sun shines, it is necessary to remove the Seat to dry the Motorcycle. I wish I could use several of them. View detail
Fits: Others Universal, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLDOR, HONDA HAWK11, HONDA CB1100EX, HONDA CB1100RS, HONDA REBEL1100, HONDA CBR1000RR-R FIREBLADE, HONDA CB650R, HONDA CB1000R, HONDA VFR800F, HONDA CBR650R, HONDA CB1000 SUPER FOUR, HONDA CBR900RR, HONDA X11, HONDA VFR, HONDA X4, HONDA CBR1000RR, HONDA CBR600F, HONDA VRX
add-25r Use BlackMotorcycle Cover 3L
[How is it used?
Motorcycle Cover in Garage
Was the one you received as per Image?
As per Image
How was your experience with it?
It is easy to apply.
[Points to note]
Be careful with Exhaust System after driving or when it is hot.
How did it compare to other products?
The delivery time is fast and the price is good.
Other items that would be helpful
Installation Point or hang
This size is just right with SeatBack mounted with zx-25r up on Motorcycle stand in front and back.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA virago, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA YZF750SP, YAMAHA XJR1300, YAMAHA XV250, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA XJR1200R, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZX750, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750, YAMAHA FZR1000
Recommendation can be made to all Yuetc. Motorcycle Cover
First of all, this Motorcycle Cover "buy" It is! Attraction Point1 A good looking, unique camouflage pattern." Attractiveness Point2 The Key for Hole's 40mm Eyelet. (Large and convenient) Attractiveness Point3 Red LoopTape on Front section. (It's very useful!) It doesn't have great rainproof performance, but it's affordable, easy to use, and the camouflage pattern is cool! It is very useful in the parking lot of the apartment because I can easily recognize my motorcycle with the camouflage pattern! View detail
Nice upgrade from stock wires
Since I upgraded my ignition system during an engine rebuild, I decided to get brand new spark plug wires as well. NGK appears to be the best choice, and the price from this retailer was lower than my local bike parts store. Honestly can't tell or feel a difference between these and the OEM ones,It seems like cold starting is easy. but hey, they're red and they look cool... plus they are backed by NGK, so you know the quality is solid. View detail
Element is always this!
Required Packing on OEM Equivalent Product (excluding Drain Washer) It is easy to use because everything is included in the package. View detail
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA virago, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA YZF750SP, YAMAHA XJR1300, YAMAHA XV250, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA XJR1200R, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZX750, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750, YAMAHA FZR1000
Motorcycle Cover After 3 months of use.
[How is it used?
Used in a parking lot with a carport. Where rain does not hit directly.
Was the one you received as per Image?
Camouflage pattern, as per Image. I prefer this area.
Was the installation difficult?
The size is a little large.
I'm satisfied with it because it just covers me completely.
How was your experience with it?
Use it for 3 months.
(1) Camouflage patterns can be quite recommendation in terms of security since they blend in at night.
A color that can recommendation in terms of security. This was a pleasant miscalculation.
I don't know about the durability of the PelePera fabric, but if it is not exposed to direct rain and can be stored indoors, it seems to be reasonably durable.
At any rate, I've been using it for 3 months with no problems at all. I just think it would not be suitable for places with Blue empty parking. Especially the fabric is so thin that I think the Cover will tear in windy areas.
[Included Parts:were they on?
[Was there anything that disappointed you?
My concern is the Buckle, if it breaks I won't be able to tie the Motorcycle down and it will probably crack over time after a few years. I'll see how it goes.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Stable braking powerGolden Padχ.
I am not looking for an absolute increase in braking power, but since I use the RRBrake a lot, I feel that it heats up and wears out quickly. I've chosen Sintered padGoldenχ which is highly resistant to fading, and the control is not bad. View detail
At Caliper's Overhaul.
I replaced the pad at CaliperOverhaul for about half the price. View detail
Handlebar cannot be installed without it.
I bought this Holder together with the Top Bridge for my ZZr Bar handle, and since the Top Bridge is also a HURRICANE, I was able to install it without any difficulty. I am satisfied with the position, not too far and not too close. View detail
Go to Front Disc
It took a long time to deliver the product because we were suffering from Judder due to the decrease of OEM Product, but we chose Breaking's product because of its track record and design. The Judder that had been bothering me was gone and you can feel the difference in rigidity because it is thicker than the OEM Product. It is not a cheap purchase, so it was worth the trouble and the decision! View detail