If it is a single cylinder, it is very effective Large!

Fuel economy will also increase.
Power also goes up.
Life gets better, too.

Is there anything cheaper and more effective Large?
The effect is particularly large for single cylinders.
Installation on CUB110. View detail

I bought it as a Stock, but I replaced it as soon as possible and it works great!

I purchased it for Stock on April 6 and it was promptly replaced.
Even after replacing the battery, the cell was weak and rarely restarted from idle ring stop, so I checked the Fuse and found that the Fuse had not run out, so I checked the Plug and found that it was covered.
After the replacement, the cell runs well, and the car no longer has trouble restarting from idle ring stop.
It has about 13,000 km since I last replaced it with the same one, and I was hoping it would last a little longer, but the price is low, so it's a good thing. View detail

Advantages of Maintenance

I have been using DX since its release. I don't mind maintenance, but sometimes I get tired of doing it when I'm busy with the weather, so it's nice to have less frequent replacements. Fuel consumption and running performance do not change drastically. View detail

Okay!

It works well even for my 110kg fat self! View detail

Purchased for PCX150KF30 for Stock

Purchased as Stock because it has traveled 13,000 km since the last replacement.
Denso has no choice as only DXPlug is compatible.
I have replaced it with this plug last time and Idlingetc. is stable without any problem. View detail

Cheap but good product

I purchased it as a replacement for the genuine Benley 110. You can't feel any difference.
Although it is cheap, I think it is a really good product.
I replace it every 10,000 km, but I think the replacement cycle could be longer.
I plan to continue using it.
-------------------------------------------------- -------- I purchased it as a replacement for the genuine Benley 110. You can't feel any difference. Although it is cheap, I think it is a really good product. I replace it every 10,000 km, but I think the replacement cycle could be longer. I plan to continue using it. Powered by Google Translator View detail

Replaced with AJ59SUPER CUB110 Iridium plugs

To be honest, I don't know much about the effect of replacing it. 100% of the vehicles I have purchased so far have Windshield IRIDIUM in them.

I only feel that the Engine is working better, but that's OK, it's a world of self-satisfaction. View detail

Bore up car is a good component to check.

When we recently replaced the Valve stem seal during the Overhaul, we also replaced the exhaust Valve Stem.
Why? →Valve on the exhaust side is bright white and slightly GizaGiza................this looks bad (lol).

What symptoms did you have?
?Many stalls while driving.
No ?Idling.
I have not been able to improve the above even after ?Carburetor setting.
?Black smoke is now coming out of the Exhaust System.

[Cause?
Carbon adherence to Valve
↓
●●* Insufficient fuel in lean Burn region
↓
Insufficient cooling
↓
Carbon ignites (Detonation)
↓
Valve erosion

Lean Burn ... lean combustion. 。 In the case of gasoline engines, the ratio of air to fuel that is just right for combustion is called the theoretical air-fuel ratio (14.7 to 1), and if it is thinner than that, the Lean." The name of the product is called

→The possible reason is that when I initially bore up to 75cc, I was turning the carburetor setting quite a bit with the carburetor setting thin.

What is Valve Stem in Engine?
Valve Stem is related to Engine, and the axis of intake/exhaust valve formed by the umbrella and the Stem part is called "Quantity:The term refers to the bearing portion that is set.
Valve stem seals can be used to prevent engine oil leakage.

Where is the Engine valve?
Engine valves are installed at the intake and exhaust ports, and like valves in the heart, they are constantly opening and closing to control air inflow and exhaust gas discharge.
Simply put, it's like a doorway or door to the combustion chamber. 。 It is such an important component that it is not an exaggeration to say that it determines the performance of the Engine, and the reason why there is a limit to the number of revolutions of the Engine is because the Valve cannot keep up with the revolutions.
If you compare the engine to the heart, the engine valve is a valve-like component inside the heart. 。

Valve Replacement Method Same as with Stem Seal.
procedure
?Remove the Dynamo cover to expose the Flywheel. Similarly, remove the Side cover of the Cylinder head.
↓
(2) Match the notch on the Crankcase with the top dead center mark (T) of the Flywheel and the 0Mark on the Camshaft Sprocket with the notch on the Cylinder head.

Remove the locker arm, take the camshaft, remove the Valve Spring using the ValveSpring compressor, and remove the Stem Seal→.
Remove the Valve Stem and replace it with a new one.
After installation, do not forget to adjust the tappet clearance using a Thickness Gauge and Tappet Adjust Wrench.

The following is the sequence of assembly:?→?→?.

In my case, I found a damaged Valve Stem when I replaced the Stem Seal.
Stem seal replacement and valve stem cleaning or replacement are done at the same time.

The exhaust valve was available from POSH, but it was for the Big Fin Head Bore Up Kit, so it was NG.
OEM.

[After exchange]
◎Idling is good.
◎Stalling while driving was eliminated.
◎Black smoke also disappeared.

Regardless of the Engine Displacement Volume, if you bore up with the Normal head, the high RPM range and Main jet should be a slightly thicker number.
I don't want them to have to struggle and go the long way like I did (laughs). View detail

What a quality!

It is subtle in terms of Size.
I think the normal use is to use Side Stand with Handlebar Lock.
Sexy as in the picture, your legs are visible. I wanted it to be just a little bit longer.
Also, the bottom belt broke off after 3 days of use. What kind of quality is this?
The motive for purchasing the product was not only the price, but also the fact that it was written as heat-resistant, so I focused on the fact that I could apply it immediately after returning home, but Belt may have melted due to the heat from the Exhaust System.
As for the Cover, it is Black and has the word Security on it, so it is concealed for the purpose of minimum security. So, Belt is very disappointing because it is Clear.
I honestly want to return it. View detail

Grate item, original as far as I know

Cheapest price I could find anywhere on the internet. Defenately Cheaper than in my country. I installed them in my Honda cb500f 2020 and I rode about 3000 km a;ready and feels good. I will check them after 12000 km when I will replace them, hope all is well. View detail

More than I expected.

Product Name
NGK NGK Japan Special Ceramics MotoDX Plug CPR8EDX-9S 95321

Item Number
CPR8EDX-9S

Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020

Number of man-hours
About 1 hour

Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.

Why did you choose this product?
I decided to buy it for power up and good starting performance.

Was the one you received as per Image?
It was as per Image. None in particular.

Was the installation difficult?
The GSX had to be removed from the exterior, so that's where the time was spent; the Plug requires the supplied tools.

How was your experience with it?
I didn't experience any more change than other car models. It was no different than I expected.

[Included Parts:were they on?
None in particular

[Was there anything that disappointed you?
I didn't feel any change in performance.

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

Improved starting performance! Certainly works!

I repurchased the commuter issue because I switched from CUB110JA44 to JA59.
I had used a Plug of this series in my previous car and liked the improved starting performance and the acceleration feeling at the beginning of Axel opening.

So I decided to remove it from JA44 and reuse it in JA59, which I had switched to, but to my surprise, the designated Plug heat value was changed to 6→8 for JA59, which became a New ModelEngine!
I wonder if it is the effect of the higher compression ratio of the Engine?
Anyway, now I can no longer reuse it, so I bought another MotoDXPlug, number 8.

The installed impression is the same this time, with the first immediate impression being improved starting performance.
The image that used to be played with a "curl" sound is now played with a "curl" sound, and the increased pulse and torque feeling at the beginning of Axel opening is also unchanged.

We do not yet know how long this performance will last, but the manufacturer claims that the durability has been improved, so we are looking forward to the Large model. View detail

Easy Pon-mount LEDs

It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail

exchange of new products

It is time to replace it with a new one in accordance with the regular replacement.
The price is reasonable, which is helpful for consumables. View detail

FOR CB250F

I am happy to work with the webike team.Actually this item i could not found in my country (Mark, Drive Caution 87560MY1701). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail

having great efficacy

[How is it used?
Installed on a PCX125 JF56 with 30,000 km on the odometer, I replaced the Brake Shoe when I refreshed various parts.
It was not reduced enough to replace it at a glance, but I replaced it, so it is safe for the time being.
How was your experience with it?
Since I did not prevent the squeal, there is a dragging cue sound every time I do the Rear brake, but I think it can't be helped for the time being.
I thought there would be no difference between the OEM and the Rear brake, but I'm glad I made the change.
I also don't know how durable it is, so I gave it 3 stars.
It looks cool, and although it is a part that you can't see, it was nice to have the feeling that it was replaced.

How did it compare to other products?
I've only used OEM, so I don't know that much, but as mentioned, the efficacy has definitely improved.

[Points to note]
You should squeal!

Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer View detail

I wanted a camouflage Motorcycle Cover.

[How is it used?
Used for KSR-II.
It is kept in Garage, but the reality is that it is not a fashionable thing called Garage. Garage and workshop. It is reasonable to say that dust and dirt are falling on motorcycles that have not been ridden for a while....
I purchased the Motorcycle Cover to improve the current situation where the first thing I do when I start to ride my motorcycle, which is supposed to be kept indoors, is to wash it.
Did you receive the item as per the Image?
I have purchased 3L/4L Size and L Size of this product in the past, and they have been used on SV650, SEROW, LITTLE CUB, etc., respectively, and have been very useful. I usually buy 1~2Size Large size body cover, but this time, I bought a 3L/4L Size and L Size body cover, which are listed on the back side of the box. Size appropriate for KSR-II." I purchased the M Size which is
I personally like camouflage patterns, so I searched all over Webike for this product and chose it.
How did you like it?
The reason why I had purchased the Large size is that I had been using it for a vehicle with a Rear box and a front basket. Bare bones. I purchased the M Size as specified for the proper size because it is used for a vehicle with a
when covered with Just fit." I will probably buy the M size again next time because I don't plan to do any more customization or rear box installation, etc. on this vehicle.
As I mentioned above, I use it for vehicles stored in Garage, but the fabric is thin, so I feel that the durability and weather resistance are a bit stiff if the vehicle is stored in the sun, such as on a bicycle parking lot.
[Points to note]
It is a thin fabric, labeled 100% Polyester, so you may want to consider replacing it after around one year if used outdoors.
Also, when the Engine or Exhaust System is hot, it is stated that it should be used only after the system has cooled down sufficiently.
How did it compare to other products?
Camouflage-colored body covers used to be sold by several companies, but recently they have become scarce, perhaps due to lack of demand.
Among them, Mr. Uniker has Green Light camouflage and Color:I can only be thankful that they have S Size to 8L for each of the two color variations of Gray camouflage.
Other items that would be helpful
Point and hang of installation
Not for use on vehicles at high temperatures.
Since the Motorcycle Cover is not strongly appealing to durability and weather resistance for its price, it may last a little longer if it is stored indoors or in the shade when not in use to avoid unnecessary ultraviolet rays.
similar to the above Heat resistant, durable, weather resistant If you are looking for a more expensive Body cover, consider a more expensive Body cover.
[ITEMS TO BUY TOGETHER
If theft prevention is also a consideration, purchase a strong Motorcycle locketc. to enhance theft protection.
[Opinions and requests to Manufacturer
We would be very grateful for two different color variations, but we would also appreciate it if you could add sand camouflage pattern, marine camouflage pattern, etc. to the lineup to make the garage even more colorful. View detail

White light!

The LED Bulb can be attached to the bulb, as the name suggests, and the cosmetics are good. View detail

HondaOEMGrip heater

Installed on HA-02 with no problem at all.
Since the Handlebar Cover was attached at the same time, it feels so hot that it is the strongest in the northern part of Tokyo about now.
Is it ok to wear summer Gloves inside for safety?

OEM Product is good for peace of mind. View detail

Low cost Low Bright

To be honest, the brightness is not enough at all. However, if you want a LED light that shines white, this product is a good choice because of its low price and easy installation. If you need brightness for touring, this product is not reliable. It will be difficult to drive at night in places with poor street lighting, especially in bad weather. Especially in bad weather. But it is cheap! Easy installation is excellent. View detail