Hand BentTitanium great!

I bought it at the end of the year and finally installed it recently.
I knew I was right to buy this.
At first, I was thinking of buying the cheapest machine bended or Nojima, but I decided that if I was going to buy a new machine, I wanted a higher grade one.

I have no regrets at all, in fact, it was the Large right decision to buy this one.

The beautiful Hand Bent line and the color of the ware are all excellent. View detail

Design is good!

Lowdown type was selected for better footing.
MORIWAKI is a good parenthesis because it also has an auxiliary bolt!
I am satisfied with it with no regrets.
Parenthesis was further improved by using Titanium for Bolt. View detail

Fits well with White body

Since the OEM footpeg is Silver, the impression can be tightened without destroying the color balance.
Pre-assembled, footpeg is set at 23mm for a natural feel and easy adjustment of Stop-lamp lighting.
The overall stability has been improved because it is easier to hold the ankles, although the body is originally designed to have a natural knee grip.

If you are installing it by yourself, you need to use Pliers for Split Pin and Torque Management, and be careful not to forget to tighten them.
The first unit also had the Rear Sets installed, but it was a little more difficult because of the Full Cowl, the Quick Shifter, and the need to remove and insert the Split Pin.
The Instruction Manual is written for people who know what they are doing, so if you don't have the tools and knowledge, you should bring your own tools or buy them from a shop that can install them.

The item is definitely nicely finished and the Pedal's Rubber is solid.
Since there are not so many parts of a motorcycle that can be played with, this is recommended for those who want to create something different from others in areas other than the Handlebar area, Exhaust System, and Fender. View detail

It does not correspond to Japanese Vehicle Inspection.

for RaceIt does not correspond to Japanese Vehicle Inspection.
I don't remember there being any regulations for vehicle inspections in FOOTPEG? I was wondering.
Purchased with the understanding that the Manufacturer would just not warrant it anyway due to the disclaimer.
When it came time to install it, I understood what it meant.
The Shift side is fine, but the Brake Side is not.
I cannot add a NORMAL stop-lamp switch.
Therefore, the Stop-lamp does not turn on even if the Rear brake is stepped on.
So what to do about it, I hear it's common in other Rear Sets.
A separate Hydraulic Switch attached to the Brake line will solve the problem.
However, to do so, it is necessary to remove the banjo bolt of the rear brake and bleed the air.
Also, the stop-lamp switch needs to be wired.
The work itself is not that difficult, but it is dangerous for beginners Level, so choose to hire a PRO!

Feels good after installation.
Gear changing also seems to be well determined in a small way.
Position is still a little tight.
The non-slip surface of the footpeg is quite sharp and I don't think it slides at all.
The soles of the shoes feel like they are being scraped off, so be prepared for that to a certain extent. View detail

MORIWAKI split collar

I ordered this due to the loss of my cracked collar. After installation, it was perfect. View detail

MORIWAKIShort TubeFlange

One of the four I ordered had to be shaved a little to fit, probably because of the BALI. For some reason, one of the bags was also in a different bag. View detail

Cool

It has a more luxurious appearance.
I don't know about performance because I haven't run it that much yet. View detail

Fashionable HornGuard

Attach the HornBody by co-tightening it with the Bolt that holds it in place.
Guard's Logo can be adjusted to any desired angle.
The other item in the photo is ZEAT Headlight guard ZE52-4100. View detail

unaffected and sober

I chose it for its simple appearance because it is supposed to be left on. It works well when on duty without asserting itself. View detail

What special tools are required?

While working according to the Installation Instruction Manual, a special TorqueScrew tightening tool was required, although fortunately a hand-held tool of the same type could be substituted.
I think that a regular commercially available screw would be sufficient for this 4-point screw. View detail

Since the Exhaust System is MORIWAKI

[How is it used?
The front to protect the Z900RS Radiator and the true intention to make it look better.

Was the one you received as per Image?
It was just like the image.

Was the installation difficult?
There is also an Installation Instruction Manual, so I think it will be no problem at all!

How was your experience with it?
After installation, it was attacked by a bug attack as soon as possible, but it was properly Guarded!

[Included Parts:were they on?
Required bu for installation [How is it used?
The front to protect the Z900RS Radiator and the true intention to make it look better.

Was the one you received as per Image?
It was just like the image.

Was the installation difficult?
There is also an Installation Instruction Manual, so I think it will be no problem at all!

How was your experience with it?
After installation, it was attacked by a bug attack as soon as possible, but it was properly Guarded!

[Included Parts:were they on?
All parts necessary for installation are included.

[Was there anything that disappointed you?
Silver stands out quite a bit, so Black might have been better. View detail

It is casually MORIWAKI.

I was not happy with the snail-like cowl mirror on my CB400SB, and when I replaced it with a handle mirror, I bought a MORIWAKI one to fill the original hole. At first I ordered a cheap one from Amazon.com, but they didn't have the color I wanted, so I decided to go all out and get MORIWAKI anyway with WebikePoint.
It is a rather nondescript cover with a black matte finish, but since it is a MORIWAKIDesign (I don't know much about it and it is not Mania), I decided to go with it. As I have said many times, it is nothing special, but I think it covers the Mirror Hall in a subtle way. View detail

Bean-jam-filled wafers (Monaka) tube

[How is it used?
The Normal muffler was loud enough, but I still wanted the Full exhaust titanium.
Full exhaust titanium is not a hobby for large-bodied manufacturers' Silencer, so I'm going to use MORIWAKI bean-jam-filled wafers, although they are expensive. (Monaka) Tubes.
I made a choice.

Was the one you received as per Image?
As per Image, Titanium is still good.

Was the installation difficult?
The installation instruction manual is very detailed, so I was able to install it without any problems.

How was your experience with it?
At first it was about as loud as Plus alpha to the OEM, but after about 1000km it became quite wild.
Since it is solid titanium, you can add your own titanium browning to it. You will love it.
Also, many Z900RS cars have Short Tubes, so it's good that they don't look like other cars.

Other items that would be helpful
Installation points and hangs:Torque wrench and extension, deep socket for easy installation.
I also applied SledgeCompound to my Flange bolt. I also applied SledgeCompound to my Flange bolt.
Liquid Gas was included, but I didn't want to use it much, so I didn't use it this time.
(No exhaust Gas leakage even when not used) View detail

Good stuff

Easy installation, good appearance, Recommendation View detail

I am satisfied

Low unit price and ScrewQuantity with Driver:2pc
It is good to be able to exchange easily.
Inexpensive foreign-made products may be poorly processed.
I have a lot of defective products and I don't want them to leak.
We chose MORIWAKI products, even if they are a little more expensive.
The look would have been better if it were made of Plating. View detail

Large I'm satisfied.

I purchased the Silver color.
OEM Material:The PlasticCover is removed and the Hexagonal Wrenchetc. can be easily installed and replaced.
Since the OEM product is plastic, the texture has been improved considerably with gold parts.
The silver color gives it a larger appearance and a more custom look.
It is also used in OEMOption by a reliable manufacturerMORIWAKI, so you can rest assured. View detail

Exhaust System

I like it very much! View detail

Essentials for Maintenance

Purchased to use the Racing Stand during maintenance.
Therefore, I purchased the least expensive MORIWAKI product, but there is no problem at all in using it.
On the other hand, I wonder if there is any added value in what is effective.

We use STAND made by JTrip, and the body is upright and stable, giving us a sense of security when servicing.
Highly recommended if you are not particular about the appearance. View detail

Heat-resistant Sticker

When I purchased a certain Exhaust System, there was nothing in the Silencer section, so I put it on.
I know it is heat resistant, but is it really heat resistant? I think it's really heat resistant.
But when I looked at it after running, there was no problem at all. As expected of Mr. MORIWAKI.

The durability of the product is unknown as it has just been applied. View detail

Great Sound. Looks good. Love it.

Very easy to assemble this slip-on exhaust. Wrench nut size required is 12mm. One man can easily finish the job. This neo classic exhaust is very lightweight and the black paint blends in perfectly with the color of my bike. Sound is wonderful. View detail