Reviews
Valuable Exchange
Model YZF-R25
I replaced the Disc Rotor and all front brakes are now brembo. I am very satisfied and it was a worthwhile replacement. You can tell the difference from the moment you change.
View detail
It's perfectly normal
I used it on my MAJESTY125
The MotorcycleBROS specification table lists a different Plug, but this is the correct one, so please be careful if you are buying!
It is a Normal plug, so it is quite normal, but since it is NGK, it is still very safe.
I'm going to Repeat it again.
View detail
Plug replacement
Replaced the original old C7EPlug with no problems.
I'm not sure if it improves starting or fuel economy.
View detail
Used for Circuit practice
I use it for my Circuit practice runs.
I don't need it to be full, but it is too thin as it is on NORMAL.
Exhaust system was replaced and air cleaner OEM was installed, but Torque was raised and the burnt condition of the plug was good.
I am satisfied with the price because it is very effective with a simple installation.
By the way, since the driving is Cart course, I still think full control is necessary for long periods of high RPM in full Course.
It's like a city drive Plusα.
View detail
I knew it! Brembo!
The Pad that originally came with it was getting very thin, so we replaced it.
At first, I wondered if the stop was worse than before. I thought that it was worse than before, but I drove on.
After running for a while and some heat, it settled down to a smooth stop, just the way I like it.
KTM is a BYBRE Caliper, which means that the braking power is fine, but until now it has felt like it was working too hard for me with the kakkun.
If you are asking if brembo's Pad is unstoppable, rest assured that it is not at all.
The brake system is brembo after all.
View detail
safety
DUCATI SCRAMBLER2020 Rear Wheel Brake
The original pad is from bremboOEM, but we replaced it with this one.
When I first started using it, I was worried that it wouldn't work…? But as I let it sink in, it worked just as described. It works as long as you hold it/step on it." I feel that it is more Mild than OEM.
I think it is suitable for running like adjusting the speed with the rear brake while keeping the RPM low with a tight corner.
As for durability, I don't know since I've only just started using it.
View detail
Reliable Brand
Brembo is now the standard equipment on the upper models, but the red color is very noticeable because of the fine detail on the Brake Pads.
SPMODEL is a product that is not intended for racing, so it can be used on public roads.
The product itself is easy to Control and feels good.
View detail
Genuine R&G Toe Guard for Honda CBR600RR 2010
R&G are a great brand and provide some cracking protection for all models of bikes. They sell a lot for the CBR600RR as these bikes do hit the deck often on track. This toe guard is an essential part when riding on a track as you just do not want your foot or anything in that area in the event of an off. Finding this part number was not too hard as this version does fit a lot of different models and manufacturers. The price from Webike was good value and add with the other items in my basket, I got them all shipped together to save on teh shipping cost. EMS got my order to me in 5 days from shipping. The toe guard is super strong and the bolts that attach this to the swing arm are also really strong. As this is aluminium, it will take a fait bit of hsammer before it gives up the ghost, I know this as I previous;y had one and it took some damage before it eventually snapped. The bolts are threaded really well, the painted finsih is really good and flawless too. Fitted in no time. Very pleased with this and now it will be good to go on the track once again. View detail
Engine may generate less heat.
When the exhaust pipe was removed, the exhaust valve was too white and we wanted to reduce the engine heat generation.
Dial was adjusted at the specified value, and EngineCheckLamp was illuminated when driving more than 30 minutes at more than 100 km on the highway.
Lamp was turned off when running less than 100 km.
The engine oil temperature was just before 95 degrees Celsius at this time of the year.
The impression I got from driving the car was that it wasn't getting any worse.
Even if the rear wheel has 26 horsepower and 3% power up, it will still be about 1 horsepower, which will be difficult to feel.
Well, I will check again how the Oil temperature will be in the summer.
View detail
Genuine Yamaha Cotter Valve for FZ1 2006
I was doing a full valve rebuild on this FZ1N 2006 and needed the cotter valves as I did not have these is my garage. I did struggle to find the parts actually available locally so I decided to get them from Webike. I found the parts pretty easily as I already knew the other parts needed and had a schematic for the rest. The price Webike had these for was really good value. With a few other parts in my order, all the items were shipped together with EMS and arrived in perfect condition in 5 days. The packages were all individually packed in Yamaha envelopes and stapled together so I did not lose any in the box. The valves are really small parts and can become damaged if not well protected during transit. Webike have this part spot on, very well packed out with padding. The valves themselves are brilliant quality and you can see this from the machine work that has gone into them. Crisp and clean and no weird shards of swarf on them at all. Just got to get around to fitting this all in with a busy schedule now. Very pleased with the purchase for the 4 cotter valves. View detail
Genuine Yamaha Gaskets for MT07 2020
I wanted to get a few of these for future projects and it just so happened that one of these was also needed for the rebuild job on the MT07 2020 that had an accident and needed sorting out. This gasket was for the water pump to keep it from leaking. Not really a hard part to find as this one like a lot of other gaskets from Yamaha do fit a host of other models. This is why it is good to get more than one when I order from Webike. The part was easy to find using the tools Webike provide in their help sections and then if you like to cross reference, do this via Yamaha schematics. Simple. With a lot of other nuts, bolts, washers and gaskets needed to complete this rebuild, I had a lot of the parts shipped together to save me on shipping cost. When you add a few other parts, it really does work out cheaper in the long run. Also, EMS saves me time by shipping in a efficient manner and gettting my order to me fast. In 5 days from shipping, my order arrived. All my parts were in great shape, no damage caused in transit at all. I am not surprised really as Webike warehouse do a cracking job at packing the orders well. I got 5 of these washers and each came in a Yamaha packet. The gaskets are I think, copper but may be a composite but defintiely have copper in them. These are perfect as copper is a soft metal and will crush down to hold a tight seal. Exactly what you want for a water pump. Very pleased with the purchase and the gaskets are super nicely machined. Great work Webike, thank you. View detail
Easy to use with OEM Fee Ring
Some pads work with a Snap at the moment of grip, but a pad that works too hard is nerve-wracking when you want to slow down while dragging the Brake a little.
The Pad here has a Fee Ring that is close to OEM and is gentle at the beginning of the grip, making it easy to control the Brake.
Of course, it works well if you hold it firmly.
Breaking has become more enjoyable after adding this pad because it works consistently in a sensible speed range, regardless of weather conditions.
View detail
Tour NSR
I installed it on my NSR as a DIY project.
We used it for 4 nights and 5 days touring from Kanagawa to Lake Biwa.
Unlike TouringBack, Large worked well in the rain!
View detail
Expect performance of Rear-specific Compound
Used on F800GS 2013 Rear.
First of all, it looks good.
Not only the back plate, but also the sides of the lining are bremboRed.
I am satisfied with the large size and the change in appearance when installed.
Since it is used for city driving~touring in Maine, it is more important than absolute braking power to have control that allows fine speed adjustment, and to be able to adjust the quantity to the weather conditions.:Pair (for Left and Right) Expect Brake performance that will not be
My impression after driving only about 10 km on the way home from Shop is that the braking performance is sufficient for our needs.
We have a perimeter and would like to explore the differences with the OEMPad from now on.
View detail
Fits: HONDA ST1100 A, HONDA XL1000V VARADERO, HONDA HURRICANE, HONDA ST1100, HONDA Shadow slasher750, HONDA SHADOWCustom, HONDA Shadow classical, HONDA CB400 SB, HONDA CB400F, HONDA CB400 SE, HONDA GOLD WINGSE, HONDA GOLD WINGF6B, HONDA GOLD WINGF6C, HONDA GOLD WING, HONDA Integra, HONDA Integra, HONDA Africa Twin, HONDA Integra S, HONDA Africa Twin, HONDA XRV650J
Cl500
I bought a Daytona while looking for an oil filter. The outer diameter of 64mm seemed to fit perfectly. I didn't buy it to use it right away. The price was cheap and it was a first-hand product, so I bought it with confidence. The dimensions were not written in detail. Other products also have the product dimensions written on them so that consumers can easily use them. I would like you to know if it is possible ----------------------------------------------------------- -------------- I bought the dayon while I was looking for an oil filter. I think it's perfect for 64mm. I didn't buy it to use it right away. The price is cheap and it is a Japanese product. I want you to know if it can be Powered by Google Translator View detail
Fits: YAMAHA FZ6F azer, YAMAHA FZ6, YAMAHA FZ6 Fazer ABS, YAMAHA FZ6 Fazer, YAMAHA FZ6, YAMAHA FZ1Fazer ABS, YAMAHA FZ1Fazer, YAMAHA FJ-09, YAMAHA FZ-07, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ-09, YAMAHA FZ-10, YAMAHA FZ1, YAMAHA Fazer8 ABS, YAMAHA Fazer8, YAMAHA FZ8 ABS, YAMAHA FZ8, YAMAHA FZS 1000 Fazer, YAMAHA FZS 600 Fazer
Genuine Gilles Tooling Sport foot peg set, pillion for Yamaha FZ1 2012
Having changed out the front rear sets the foot pegs they came with were great for grip and the rear also could do with changing to match and also for passenger grip. Not a hard part to find as these do fit a lot of different Yamaha models. The price was about the same as I could source locally but my supplier was awaiting them so I got them direct from Webike. There were a few other parts in my order so I got them all shipped together. EMS delivered my order in 5 days from shipping. Everything was packed well and no damage during transit. These foot pegs are a thing of beauty, the machining that went into them is fantastic, the foot area is super grippy and will not fail even when wet, (I know from experience). The glossy black paint finish is awesome and probably the best I have seen on foot pegs before. Not a hard job to fit, I used new cotter pins to add the foot pegs as the old ones were not great. The overall finish is better than expected. Thank you very much Webike, great job. View detail
Fits: HONDA ST1100 A, HONDA XL1000V VARADERO, HONDA HURRICANE, HONDA ST1100, HONDA Shadow slasher750, HONDA SHADOWCustom, HONDA Shadow classical, HONDA CB400 SB, HONDA CB400F, HONDA CB400 SE, HONDA GOLD WINGSE, HONDA GOLD WINGF6B, HONDA GOLD WINGF6C, HONDA GOLD WING, HONDA Integra, HONDA Integra, HONDA Africa Twin, HONDA Integra S, HONDA Africa Twin, HONDA XRV650J
Purchased for 778
Replacement for 67926? Purchased with the following information.
I know you want to organize the part numbers, but a normal search by Motorcycle's name would bring up the higher end Filters, and I thought the method was too stingy.
The quality is made by DAYTONA and I have been using it for about 60,000 km so far while replacing it and I have never had any problems!
Be careful not to mistake the part number for the corresponding car model!
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
It is quite a nice attachment!
These parts replace the bolt for the Handlebar Clamp and allow the RAMMount to be installed.
I am in this state of attachment (⇒ see photo).
It was quite a challenge, but I like the way it is attached to the handlebar and it does not affect the handlebar easily.
This will be useful for attaching a smartphone or Radar or something.
View detail
Fits: KAWASAKI NINJA 400, YAMAHA YZF-R7, DUCATI STREETFIGHTER V4, YAMAHA MT-03, Others
Middle & Litter SS's to accompany.
Purchased for ZX-10R.
The Rear Sets were originally developed for the Small SS, and the compatibility is excellent.
Especially for Middle to Litter SS, Rear Sets are so small that I don't want to put people and backs on them,
It has a shape and stability that fits well with such Rear Sets.
Although the capacity is not large, it is not a problem for day-touring or MINI maList.
Also, it is not too large vertically, so it is acceptable even for a liter SS with high rear cowl and easy to be caught by the foot.
I think it is high.
We have not experienced any rain yet, but the Material looks Large sturdy enough for some street rain.
[Covers for rain are included.
The only Demerit is compact and easy to attach and detach, so I always carry it with me when touring,
The only thing is that if you don't keep a key on it, it can easily be taken away.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Essential Items for attaching the Smartphone Holder to the ZX-10R.
Essential Items for attaching the Smartphone Holder to the ZX-10R.
The installation itself is not so difficult, but the Screw where it is attached is special,
It is impossible without a proper Torque wrench.
[Maybe it's just the '24 model, but...]
It also requires a locking agent, so at first glance it looks like it can be popped on, but to a certain extent it is.
Tools and equipment are sometimes necessary.
I've only been using it for a short time, but the RAM Mount system is just as good. Durability is for sale,
It is safe in the knowledge that it will not break that way unless it is defective in the initial stages.
View detail