Reviews
C7HSA
We are bringing my friend's SUPER CUB CUSTOM back to normal. We replace consumables, including the glow plug. We take only time-tested spare parts. In terms of quality, everything is on top, without complaints. The engine started working like a Swiss Watch. View detail
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
Does not fit the KL250 Sherpa.
The Manufacturer's list of compatible models says it is compatible with KL250 Sherpa, but that's too long.
If installed normally, there will be excess
The quality of the product itself is not bad, so I think it will be fine for cars with longer forks.
KL250 Sherpa's Fork outerTop to bottom of trident is 240mm
Catalogue value WheelTravel is 230mm
100mm remains above the Outer even when shrunk the most without processing.
This would make Stroke about 130mm.
If it was just for Inner Tube protection purposes, it would be fine, but I don't think it is, so I cut it off, even though it will look very ugly lol.
In hindsight, I lightly regret that using the top half wouldn't have made it so ugly.
However, even in this state, the Stroke will be reduced by about 50mm
Boots itself becomes Bump rubber.
Even other companies' products that say they are compatible with KL250 Sherpa are quite long.
Would it be better to just use a shorter product with more extension?
Maybe I'm losing my mind, but I'd like to find a good product!
I bought it + even processed it so I'll be using it for a while lol.
View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power up by replacing Plug, Power cable and Hyper Ignition Coil!
Installed on SUPER CUB110JA44.
Removing the leg shield was a bit of a hassle, but installation was easy.
If you have about 15 minutes, I think you can do it.
I thought the cord was too long and wasteful for my Motorcycle.
If only it were a little cheaper.
As for the interval of running, since both NGKDXPlug and Mukawa's Hyper Ignition coil were replaced, I think that the ignition is now running smoother and stronger than before, although it is difficult to determine which one is working.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Looks cool too:??
Used for VANVAN75.
Starting performance seems to have improved.
There was no change in maximum speed.
It looks pretty much like it.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
You can feel the increased power.
Installed with Mukawa Hyper Ignition Coil.
I don't know which helped, but it clearly increased power.
Even uphill climbs, which used to be tough, are now a breeze.
View detail
Fits: YAMAHA YFM80W, YAMAHA YFM50, YAMAHA YFA125, HONDA CB250, HONDA CB250 LACustom, HONDA ATC70, YAMAHA YFA-1BREEZE, YAMAHA TT-R125LWE, YAMAHA TT-R50E, YAMAHA XTZ125, YAMAHA XVS125DRUG STAR, YAMAHA YB-1 FOUR, YAMAHA YB50, YAMAHA YF100M, YAMAHA YF80M, YAMAHA YFA-1, HONDA XLR80R, HONDA XL80S, HONDA TRX70, YAMAHA RENAISSA
What is the Windshield IRIDIUM effect?
This is a purchase to compare with NORMAL.
It is said to improve acceleration, engine power, ignition, starting, and fuel economy, but is it that effective?
The price, not that high, but it is 3 times Cost of NORMAL, so I expect to see a difference.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
While we're at it!
It had deteriorated, so I decided to use NGKPower cable, which has a proven track record and reliability, while replacing it. I think it is stable. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Replaced with Hyper Ignition Coil.
Replaced with Takegawa's Hyper Ignition Coil.
This can be easily replaced by simply cutting and connecting a long Cable.
View detail
Fits: YAMAHA mio, YAMAHA TOWN MATET80, YAMAHA TOWN MATET80, YAMAHA YFA-1BREEZE, YAMAHA YF100M, PGO MyBuBu125, PGO I-I-CHRAGE125, PGO T-REX125, PGO PMX50, PGO PMX110NAKED, PGO PMX110, PGO G-MAX125, KYMCO Kahlo 100 II, KYMCO Kahlo 100, KYMCO VLINK125SR-C, KYMCO VLINK125, HONDA CD125, HONDA SUPER CUB 50SDX, HONDA XLR80R, HONDA XL80S
Candle NGK C7HSA
I purchased for HONDA SUPER CUB 50 CUSTOM. Part number: C7HSA, manufacturer NGK. You can buy such candles in Russia, but I order from Japan, because I think that they are of better quality. I order not the first time - now I bought in reserve. I am satisfied with the result, after the replacement the moped became faster and faster. This candle is recommended to be used during a full-fledged warm moto season, which I successfully do.Purchased for HONDA SUPER CUB 50 CUSTOM.Part Number: C7HSA, manufacturer NGK. are better in quality. It's not the first time I've ordered it - I've bought it in reserve now. I am satisfied with the result, after the replacement the moped became faster and more agile. This candle is recommended to be used during a full-fledged warm motorcycle season, which I successfully do.Webike change the previous review to this one - I always upload a photo, but it didn't load in the previous review. View detail
Fits: YAMAHA YFM80W, YAMAHA YFM50, YAMAHA YFA125, HONDA CB250, HONDA CB250 LACustom, HONDA ATC70, YAMAHA YFA-1BREEZE, YAMAHA TT-R125LWE, YAMAHA TT-R50E, YAMAHA XTZ125, YAMAHA XVS125DRUG STAR, YAMAHA YB-1 FOUR, YAMAHA YB50, YAMAHA YF100M, YAMAHA YF80M, YAMAHA YFA-1, HONDA XLR80R, HONDA XL80S, HONDA TRX70, YAMAHA RENAISSA
NGKPlug
I put it on my Bore upMONKEY and it is now easy to engage and stable. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
How effective is it?
It is necessary to cut a considerable length of cord, so it takes courage when cutting the cord.
I made it a Red code, which gave it a Custom feel and made it Parenthesis better.
I don't think we should expect anything too large in terms of effectiveness.
View detail
Fits: YAMAHA YFM80W, YAMAHA YFM50, YAMAHA YFA125, HONDA CB250, HONDA CB250 LACustom, HONDA ATC70, YAMAHA YFA-1BREEZE, YAMAHA TT-R125LWE, YAMAHA TT-R50E, YAMAHA XTZ125, YAMAHA XVS125DRUG STAR, YAMAHA YB-1 FOUR, YAMAHA YB50, YAMAHA YF100M, YAMAHA YF80M, YAMAHA YFA-1, HONDA XLR80R, HONDA XL80S, HONDA TRX70, YAMAHA RENAISSA
The difference between the standard and … maybe like there is a
[How is it used?
For KLX125. 1 pc is all I need, so it's a little better.
How was your experience with it?
Standard Plug BP5HA also had less than 100km, but the intake sound sounded a bit LARGER! (Quieter Engine sound?) I don't feel like I've become a
Not sure what the difference is in fuel economy, Torque feel, etc. (Lol)
How did it compare to other products?
I only have a comparison with the standard, but I don't think I can tell much difference. I think it's a mood thing.
[Points to note]
Many people are mistaken with Iridium plugs, but IX does not have a long life. Replacement time is the same as Standard Plug BP5HA.
View detail
Fits: YAMAHA mio, YAMAHA TOWN MATET80, YAMAHA TOWN MATET80, YAMAHA YFA-1BREEZE, YAMAHA YF100M, PGO MyBuBu125, PGO I-I-CHRAGE125, PGO T-REX125, PGO PMX50, PGO PMX110NAKED, PGO PMX110, PGO G-MAX125, KYMCO Kahlo 100 II, KYMCO Kahlo 100, KYMCO VLINK125SR-C, KYMCO VLINK125, HONDA CD125, HONDA SUPER CUB 50SDX, HONDA XLR80R, HONDA XL80S
Candle NGK C7HSA
"Purchased for HONDA SUPER CUB 50 CUSTOM.
Part number: C7HSA, manufacturer NGK.
You can buy such candles in Russia, but I order from Japan, because I think that they are of better quality. I order not the first time - now I bought in reserve. I am satisfied with the result, after the replacement the moped became faster and faster. This candle is recommended to be used during a full-fledged warm motorcycle season, which I successfully do. -------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Article details: C7HSA, manufacturer NGK. You can buy such candles in Russia, but I order from Japan, because I think they are better than quality. This is not the first time I order - now I bought in reserve. I am satisfied with the result, after the replacement, the moped became more frozen and reception. This candle is recommended to be used with a full-fledged warm motoseason, which I am successfully doing. Powered by Google Translator"
View detail