Reviews
Nice...
I replaced it with a Sintered pad because the Brake squeal would not go away and it was less expensive and seemed more durable.
The pad before replacement came with an unknown manufacturer, so there is no comparison, but it works and does not squeal as usual. 。
Control is much better than I expected, and the effectiveness changes with the amount of force.
It seems to be a bit aggressive to Rotor, which is a concern, but it was a good decision to replace it.
View detail
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR800, HONDA VTR250, HONDA RVF400, HONDA VFR750R, HONDA NC700X, HONDA NC750, HONDA GB350S, HONDA NC700S, HONDA CBR1000RR-R SP, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB650F, HONDA CB650R
It is not a pure Black.
The color looks a little brownish rather than black in the right light. It is super easy to install. I think you can install it by yourself, but if you don't have the knowledge to remove the OEM bar end, you might want to ask a shop to do it for you. The included Inner Weight is a few Grams lighter than the OEM. View detail
It was EXACTLY!
I purchased this to replace an OEM Oil cap groove that was broken.
It was Exactly in JA10!
View detail
As expected of DAYTONA
Was the installation difficult?
pimping
How was your experience with it?
It's going to look different
View detail
Dress-up in a casual way
It can be dressed up casually.
I am satisfied with the quality of the product.
It would be better if it were a little cheaper.
View detail
Kagoshima Touring for 1,600 km
Saganoseki→Aso→Takachiho→Cape Sata→Nichinan and Kyushu Touring 1600 km or so, no problem! View detail
The oil filler cap is very convenient to use and decorate
Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail
Oil Filler Cap
Changed to Green Light or Gold. View detail
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
Casual Dress-up
For Front Axle Slider and Engine slider
I have Babyface on and a Stand Hook.
The same Manufacturer is used for this product.
View detail
Shallow angle
It came with a 10° Handlebar, which felt a bit tight, so I bought an 8° Handlebar.
Only drilling of the switch box is required, but I am satisfied because the position is relaxed and the front load is not lost.
View detail
2BL-SC54 is not compatible.
I purchased this product with CB1300SB2019MODEL.
The tank side is narrow and the cap side is wide, and the screw holes do not fit at all.
So I will return it.
I think the quality is good
I would like you to check it carefully before you describe it.
View detail
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
Is there a problem with being thinner than OEM?
I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance.
View detail
PetitCustom
[How is it used?
It has a custom feel.
Was the one you received as per Image?
As you wish.
Was the installation difficult?
It's very easy.
How was your experience with it?
I like it at One point.
[Included Parts:were they on?
Hexagonal Lunch is not enclosed.
[Was there anything that disappointed you?
None
Other items that would be helpful
Remove Oil cap for NORMAL It is easy to install.
I wish it had come with a Wrench, but ….
The first step of the Custom project was the installation of the new system.
View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
More rust-resistant than OEM Product
I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
Peace of mind that it is made by MORIWAKI
The peace of mind of being made by MORIWAKI.
I don't have Level gauge, so I guess I'll go back to OEM just in case I need to replace Oil.
So far, no problems at all.
View detail