Reviews
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
Securely mounted.
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased from an acquaintance was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert the Grommet into the mounting hole of the Front Fender. The collar with the brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It feels good to properly combine and install these parts.
View detail
For CB250F
Earlier I encountered some noise in my bendset. After inserting this the sound went away. genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
For CB250F
I am happy to deal with the webike team.Actually this item i could not found in my country (Batsugu, Service Butsuku 77251-342-000). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
For CB250F
Genuine product FuseF (10A)(MINI 98200-41000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
CB250F MUFLER COLLAR
Genuine product - COLLAR, FR. FENDER 61104-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
CB250F MUFLER GASKETS
Genuine product -GASKET,EX. PIPE 18291-MN5-650 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
Is there a problem with being thinner than OEM?
I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance.
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
More rust-resistant than OEM Product
I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
Beautiful part
Great, beautiful piece, new and genuine Honda, of a high standard of quality. Product in excellent condition. It fits with high precision on my motorcycle. Item with beautiful finish, and intact. Very well packaged, sealed and stored with plastic (bubble type) and air. I received it in really satisfactory time. I highly recommend it. View detail
Fits: SUZUKI DESPELADO, SUZUKI BOULEVARD, SUZUKI MARAUDER, SUZUKI VANVAN, SUZUKI TEMPTER, SUZUKI INTRUDER, YAMAHA Ensiter 125, SUZUKI SAVAGE, YAMAHA FZX750, YAMAHA XV950, YAMAHA R100 ROADSTER, YAMAHA VIRAGO, YAMAHA XV1900, YAMAHA DRUG STAR, YAMAHA Bolt, YAMAHA SR400, YAMAHA SR500, HONDA CTX700N, HONDA CB650, HONDA DREAM
Good cost performance for the production
I think the quality is high for the low price.
The body is a rather heavy gold, and the lens cut is a bit stylish.
I think that the cosmetics of inexpensiveness in relation to price is the strongest.
View detail
FOR CB250F
reasonable price.Carburetor o rings. It is Genuine. Very good packaging. Fast shipping. Thanks to the webike team. It has not been installed yet. Highly recommended. View detail
Fits: YAMAHA R100 ROADSTER, YAMAHA MAJESTY, YAMAHA GRAND MAJESTY, YAMAHA TMAX, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, KAWASAKI VULCAN DRIFTER, KAWASAKI Epsilon, KAWASAKI ZZ-R1200, KAWASAKI ZZ-R1100, HONDA VALKYRIE, HONDA FUSION, HONDA FORZA, HONDA FORESIGHT, HONDA Silver wing
Price suitable
This is sufficient for indoor use. For outdoor use, it may not be enough. The size of the CUB is 5L. 4L may be sturdy enough for large scooters, but 5L is better for big scooters. The price is cheap and it is recommended for indoor use. View detail
It depends on how you run it.
With my current driving style, I was able to run 10,000 km per millimeter. Last time I installed the same pad, but the distance was half of this time because I was driving mainly on mountain passes and mountain roads. This time I drove mainly in town. View detail
Genuine Honda Rear Piston Seal Set for CB1000R 2011
These was a set of replacements for a broken piston seals for the CB1000R I have in the garage. I found that a few of the seals were not in great condition but these ones actually split and deteriorated. I purchased a set so I now have spares if any are still ok already on the bike. I found the correct part using the help pages and links that Webike provide. All with some other parts were shipped and delivered to my door in 5 days. These are small seals and do need a little care when being shipped. No problem at all for Webike, they put them in a nice bubblewrap envelope and were already on the Genuine Honda packet anyway. They were kept flat so there was no damage to the seals. As I already had the caliper apart for servicing, this set of seals were super easy to install. They arrived in perfect condition and had enough flex to be able to seat correctly. All back together and now that is one of the jobs completed. Thanks Webike, great work. View detail
Fits: HONDA CB1100R, HONDA STEED600, HONDA MAGNA, HONDA RC30, HONDA VF750C, HONDA VFR750F, HONDA Crossrunner, HONDA VFR800F, HONDA VT250F, HONDA XELVIS, HONDA VT250Z, HONDA V-TWIN MAGNA, HONDA VT250 SPADA, HONDA VFR800X, HONDA CB1100F, HONDA CB1100SF, HONDA CBR1100XX, HONDA X-11, HONDA CTX1300, HONDA ST1300
MORIWAKIOil Filler Cap
One of these costs just under 4,000 yen.
The texture is good, so I'm satisfied.
Recommended for casual One point
View detail