Reviews
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Fits: HONDA DIOSR, HONDA DIO, HONDA TACT BASIC, HONDA ZOOMER, HONDA SMART・DIO Z4, HONDA SMART・DIO, HONDA STAND-UP TACT, HONDA SUPER DIOZX, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA GORILLA, HONDA CREA SCOOPY, HONDA QR50, HONDA BAJA, HONDA TODAY, HONDA TODAY DELUXE, HONDA CUB PRESS, HONDA MONKEY
No Impossible part
There is no part that is not possible as a Body Cover. View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
Grip replacement for LETS4
The LETS4 grips that I have been using for many years have started to hydrolyze and become soggy, so I switched to this product's grips.
The original grips can be easily removed by wiping Parts Cleaner between the handlebar and the grips.
The grip is the same as OEM and easy to use.
View detail
Fits: SUZUKI ADDRESS V50, YAMAHA Remote controller jog, YAMAHA TOWN MATE80, YAMAHA MATE NEWS 50, YAMAHA JOG TRUNKSpec., YAMAHA SUPER JOGZ, YAMAHA MATE, YAMAHA JOG SPORTS90, YAMAHA JOGSporty, YAMAHA JOG Z, YAMAHA YV50 Z II, YAMAHA JOG Zr, YAMAHA AxisTrunkSpec., YAMAHA JOG, YAMAHA Vino, YAMAHA YB50, YAMAHA Axis, YAMAHA PW50, YAMAHA V80MATE50, YAMAHA V80MATE80
Very good for occasional motorcycle rides!
Purchased for an old CUB that I might ride once a month or so.
S Size was the perfect size.
The fabric is thick and flap resistant, and the waterproof property is very solid.
The inside is also soft material and gently wraps the body of the car. Considering the quality, the price is very reasonable.
Because of its weight, it cannot be applied quickly and easily, so it may be a hassle to put it on and take it off every day when you commute on your motorcycle.
This product was very Exactly for my needs for a vehicle that is only ridden occasionally. I am planning to buy one for my other motorcycle that I ride only once in a while.
View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Clutch outer replacement
APRIO (4jp5) The clutch outer of the "M" was worn and slippery, so I bought it for a replacement.
I had changed only the clutch first, but it started to slip a little when starting off, so I decided it was time to change it.
Inside of Clutch outer (Clutch contact surface) However, the old one was smooth as if it had been mirror-finished, but the new one had the same rough pattern as the surface, so I thought Clutch had a good bite.
I haven't done a test run yet after the replacement, but I don't think it will be a problem since there are no problems with the original running.
Outer clutches are supposed to be replaced when the color of the clutch burns out, so from now on, the clutch and the quantity:I will change it with Set.
View detail
Selected Gold as an insert color
The OEM filler cap from Mission oil was a milk-white color and looked too much like a dowdy cap, so I replaced it with this one! View detail
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
Excellent pads
About quality and texture
The brake pads were chosen for Yamaha Vino; this brand has already been tested more than once in harsh urban braking conditions, so the choice immediately fell on them
The quality of the linings is high, they are dust-free, even after 5000 kilometers there is a minimum of brake dust in the drum
The glue is not visible, but there is enough of it, the sizing is very good
About the feeling of use
Operation on the next scooter showed its best side, braking is effective, even though it is a drum brake
With the correct cam setup, the brakes grab instantly and hold the wheel perfectly when pressed hard.
The average service life is about 10-15 thousand in urban conditions with frequent braking
Products to buy together
The kit includes everything you need, brake pads and springs
Difficulty of installation
Easy installation, you need to remove the muffler and rear wheel, then replace the pads
Cost performance and comparison with other products
Low cost compared to the original, and the braking quality is approximately 1.5 times higher
About shipping and packaging
Excellent blister packaging, no damage during delivery
Any concerns, cautions, or advice when purchasing
I can only recommend this product, already tested with three scooters ---------------------------------------- ------------------ About Quality and Texture The brake pads were chosen for Yamaha Vino, this brand has already been tested more than once in hard urban braking conditions, so the choice immediately fell on them The quality of the linings is high, they are unbearable, even after 5,000 kilometers in the drum minimum brake dust Glue is not visible, but it is enough, the gluing is very good ABOUT THE FEELING OF USE Operation on the next scooter showed itself from the best side, braking is effective, although it is a drum brake With proper tuning the fist, the brakes are grasped instantly and hold the wheel perfectly with a strong press The service life of an average of about 10-15 thousand with urban conditions with frequent braking Products to Buy Together The kit has everything you need, brake pads and springs Difficulty of Installation Light installation, it is necessary to remove the muffler and rear wheel, then replace the pads COST Performance and Comparison with Other Products Low cost compared to the original, and the quality of braking is about 1.5 times higher ABOUT SHIPPing and PACKAGING Great packaging in a blister, damage during delivery is not Any Concerns, Countions, or Advice When Purchasing I can only advise this product, already tested by three scooters Powered by Google Translator
View detail
Necessary and sufficient.
I bought it for Setting.
4.5gSpec. and measured with a scale calibrated with weights, the error is sufficient to be at mostLarge0.03g.
The Body has the same shape of Both Sides, which does not seem to be oriented to the Body.
Durability is unknown, but I haven't seen any reviews that say it's bad, so I guess it's not a problem.
View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
Fits: HONDA Spacey 125, HONDA Super Cub 70, HONDA Super Cub 90, HONDA DIO Series, HONDA Super Cub 50, GILERA RUNNER VXR125, GILERA RUNNER VXR200RST, GILERA RUNNER ST125, GILERA RUNNER ST200, HONDA Lead 90, SUZUKI Let's II, SUZUKI Let's 4 Palette, SUZUKI Let's IIG, SUZUKI Let's 4, SUZUKI Let's 4 Basket, SUZUKI Birdie 50, SUZUKI Birdie80, SUZUKI Birdie90, SUZUKI Address V50, SUZUKI Address V50 G
Used for LETS II with CarrierCase. Second purchase.
[Durability]
Used in a covered carport for about 2 years.
The side-view mirror area that is exposed to direct sunlight was torn; the area where the tire is exposed has rubber, but this area was not torn by pulling.
Considering the price, I have the impression that the durability is not that great.
[Fit feeling]
The length seems a little short, but since there is no ventilation, I think it is a reasonable size considering the breathability.
Ease of installation
The side with the wheel lock hole is on the front wheel side, so it is easy to see the front and rear when applying the cover.
Buckle type is easier to use.
View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
For Bore up premise setting
Bore up assumption, #80-#105 Quantity:I bought the set
The original is #72, so I am trying #80 on it since it is still before bore up.
It is a 4JP5APRIO with High Speed Pulley and is in good shape with no problems.
Since there is a wide range of settings, I would like to use this to get a rough idea of the settings and then refine them a bit more if necessary.
View detail