Reviews
Control voltage is too high.
After installation, I casually applied a tester to the battery and found that 16V was output!
I thought it was quirky and expensive, so I measured it and found that both Regulator and Battery
Idling (1600 rpm) The control was at 16V at 4000 rpm and 17.5V at 4000 rpm.
This is not usable!
Idling when I put it back in the OEM that I removed it from. (1600 rpm) The voltage was 14.5V at 4,000 rpm and 16V at 4,000 rpm.
Wasted... Worst of all...
View detail
Number 100, number 100 ♪
I am purchasing this for my CUB.
When we did the bore up, we also installed Big cabPC20. Originally, the jets were already installed. I could have used it as it was, but I wanted to replace the jets while I was touching it.
This time, we decided not to replace the Throw and Needle, but only the MJ. The Jet system of the carburetor must be made properly, otherwise it will not give good results even if you touch it. It is difficult to confirm if it is made properly just by looking at it. I think trust is the best.
I have no problem with the installation. I checked with different numbers, and I enjoyed working with OEM because there is no doubt about the accuracy of the parts. It is a very important thing to have no doubt about the accuracy of the parts, and it reduces the amount of work. As a result, we decided to use No. 100.
I can't see the number on the Jet well with my old eyes, and I can write the number on the Large Jet with a thin Magic when I store it, but I can't write it on the Small Jet. There is no limit to the working time, so I look at it with my eyes. Magnifying glasses and reading glasses are good, but I imitate people of my age who are looking at small letters on their smartphone screens. When I store them, I put the package paper inside the Accessory Case to make it easier to read.
It's been around for a long time, but carburetor is fun once you start touching it. It takes a lot of time and effort, but the best thing is that it is fun.
View detail
No problem, but...
Coupler is a little bit small and a little bit tight.
At first I thought I had the wrong part number because it didn't fit.
View detail
Anyway, it's a cosmetic!
I don't know about durability, but I chose it for its cosmetic value. View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Can't tell the difference between OEM and
I used it to replace the RearShoe on my commuting Motorcycle SUPER CUBja10.
The OEMs that had 21,000 km of use had used the TouchCUBs so close to the limit that the Touch was poor and the effectiveness of the Touch was very weak, but after replacing them with these Shoes, the effectiveness and Touch of the new car was restored.
View detail
Purchase Repeat
I bought Repeat because I used it before on my LITTLE CUB and it worked well. View detail
Product # 450-3021000
It was purchased for the Honda Super Cub to adjust the fuel mixture after installing the whale 75, size 85. Everything is great, I recommend it to everyone to purchase. Purchased for a Honda Super Cub to adjust the fuel mixture after installing kit 75, size 85. Everything is great, I recommend it to everyone for purchase. View detail
Hand Jet
It was purchased for the Honda Monkey to adjust the fuel mixture size 85. Everything worked out great, I recommend it to everyone for purchase. Purchased for a Honda Monkey to adjust the fuel mixture size 85. Everything fits perfectly, I recommend it to everyone to purchase. View detail
Commuter Rapid Spec.
This is the second time I have purchased High Speed Pulley.
The last one was NRMagic.
The Slide Piece shattered and damaged the inside of the piece and turned elliptically to replace it.
This time I want to use it with care.
Compared to NRMagic, it feels a little slower at the beginning of the run, but once the speed increases, it doesn't bother me.
View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
It was Garbage,,, it's Aluminum, so it will be crushed.
I didn't expect the material to be Aluminum...it doesn't say anywhere, so I didn't know what it was and I bought it.
Since it is Aluminum, it is just tightened with the stipulated Torque, but it crushes easily and makes no sense.
I'm crushed when I run after installation and I don't see any difference in acceleration.
I use a lot of KN projects because they are inexpensive and available, but this was Garbage.
View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
Mini greap hunter
very good grips, similar to the factory ones, very soft, comfortable to hold, I really liked it, I will recommend it to my friends View detail
Fits: HONDA NS-1, HONDA CB-1, HONDA CB400Four , HONDA GB250 CLUBMAN, HONDA MOTRA, HONDA V-TWIN MAGNA V-TWIN MAGUNA, HONDA V-TWIN MAGNA V-TWIN MAGUNA S, HONDA JADE 250, HONDA TOPIC PRO, HONDA GYROUP, HONDA GYROX, HONDA GYROX Standard, HONDA GYROX Basic, HONDA TOPIC, HONDA TOPIC FLEX
Improved visibility!
I purchased this product because the clear tail on my NS-1 is hard to see and the paint on the red bulb is fading. It was very easy to install, just remove the original bulb, insert it into the socket, and fit it into the tail lens. The license lamp is also integrated and shines very nicely. When the voltage is low, it may blink due to the characteristics of LEDs, but it stabilizes when warmed up.
It has the effect I was excited to buy, but it's a bit pricey….
View detail
Fits: HONDA CUB [Cub]., HONDA CUB [Cub]., HONDA CUB90 [Cub]., HONDA GROM [grom]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI BIRDIE [Birdie]., SUZUKI Birdie 50, SUZUKI Birdie 50, YAMAHA GEAR [gear]., YAMAHA Town MATE90 [Mate]., YAMAHA News MATE [Mate]., YAMAHA News MATE80 [Mate]., YAMAHA News MATE90 [Mate]., SUZUKI DF125, HONDA APE100 [Ape].
Hunter grips as original
Hunter grips are like the original and even better and better than the original grips. The rubber itself is thicker, denser, and the price is very budget. I recommend to everyone, I will still take. -------------------------------------------------- -------- Hunter flips as an original and even better and better than the original grips. The rubber itself is thicker, denser, and the price is very budget. I recommend it to everyone, I will still take it. Powered by Google Translator View detail
Fits: HONDA Ape (50)(APE), HONDA PCX, HONDA BENLY50, HONDA PCX, HONDA PCX, HONDA PCX, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA nighthawk 250 (Night Hawk), HONDA NS-1, HONDA NS-1, HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA LEAD50 (LEAD), HONDA LEAD50 (LEAD), HONDA LEAD100 (LEAD), HONDA LEAD125 (LEAD)
Required for Front forkOverhaul
Product Name
NTB Front Fork Oil Seal Set
Item Number
FOH-01S
Vehicles
Grom ( JC61 ) 2015
Number of man-hours
About 2 hours
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers
Why did you choose this product?
I chose this product because I wanted to overhaul the front fork of my Grom. I tried to overhaul it about two months ago, but I failed and damaged the oil seal, which caused a light oil leak.
Was the one you received as per Image?
It was just as shown in the Image. No problems.
Was the installation difficult?
I had already installed it once, so it was quicker than the first time, although I had a hard time fitting the oil seal. I used a vinyl chloride pipe as a substitute.
How was your experience with it?
The installation was done successfully and without any oil leaks.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
For MTX200RII
The rear brake of MTX200RII was extremely ineffective, so I checked it and found that it was the same shoe as the CUB, so I replaced it immediately. View detail
Fits: HONDA CD50, HONDA BENLY CL50 (BENLY50), HONDA Broad (BROAD), HONDA CBX125F, HONDA CBX125F, HONDA CBX125C, HONDA CBX125C, HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA CBX125C, HONDA CBX125C, HONDA Broad 90 (BROAD), HONDA CABINA (CABINA), HONDA CABINA 90 (CABINA), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic
Replace the old one
I think it is good for city driving, it is enough for slow driving, just my personal opinion. View detail
Fits: HONDA Ape (50)(APE), HONDA PCX, HONDA BENLY50, HONDA PCX, HONDA PCX, HONDA PCX, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA nighthawk 250 (Night Hawk), HONDA NS-1, HONDA NS-1, HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA LEAD50 (LEAD), HONDA LEAD50 (LEAD), HONDA LEAD100 (LEAD), HONDA LEAD125 (LEAD)
Size is Exactly! The rest is durability.
[How is it used?
Used for wife's used car APE
How was your experience with it?
Cosmo
How did it compare to other products?
It is comparable to OEM Parts.
[Points to note]
Dust Seal is receiving Damage and Seal should also be confirmed before purchase.
Other items that would be helpful
Items to buy together
We recommend that you remove the Dust Seal and check it once, and then prepare the oil seal?Fork oil and other consumables that need to be replaced.
View detail