Reviews
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Repeat use. I don't remember how many times I have already replaced it.
I don't like the sticky feel of custom grips on the market.
I have been using it for years.
I was surprised that it had enough gripping power without being sticky.
In fact, it is not sticky to the touch with bare hands, and there is no sense of uneasiness due to its softness.
For wire lock (?) The grooves are cut to allow for use in Race.
[How is it used?
Touring ~ Circuit
Was the one you received as per Image?
YES
Was the installation difficult?
Easy (Installed on external high throttle)
How was your experience with it?
Satisfied
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[Opinions and requests to Manufacturer
The price is low but the quality is high and there is nothing to say about it.
However, currently there is only a 120mm lineup, so I am eagerly awaiting a 115mm version.
View detail
Fits: HONDA TLM200R, HONDA MVX250, HONDA JADE SLASH S (JADE SLASH S), HONDA JADE (JADE), HONDA JADE (JADE), HONDA GB500, HONDA GB400, HONDA CL400, HONDA CBX550F, HONDA CBX400F, HONDA CBX400F, HONDA CB900, HONDA CB750FB BOLDOR 2 (BOLDOR), HONDA CB750F BOLDOR 2 (BOLDOR), HONDA CB400SS, HONDA CB400SS, HONDA CB400SS, HONDA CB400SS, HONDA TLM220R, HONDA CB400SS
Overhaul
I had an overhaul because there was an oil leak, and I always buy from the manufacturer because it is no different from the OEM product. View detail
Fits: BUELL CYCLONE M2, BUELL FIREBOLT XB12R, BUELL FIREBOLT XB9R, BUELL LIGHTNING X1, BUELL LIGHTNING XB12S, BUELL LIGHTNING XB9S, BUELL S1 WHITE LIGHTNING, BUELL S1, BUELL THUNDERBOLT S3, BUELL X1W WHITE LIGHTNING, HONDA 400X, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CBR250R (2011-)
Easy-to-Control Brakes
Used in CBR250RR MC51
I couldn't tell the difference from OEMRear Brake Pads in terms of feel.
The only thing I would say is that it is easy to get Brake dust, but the price is about half, so as long as you don't mind that,
I think this is better for those who do heavy Youth.
View detail
Fits: BUELL CYCLONE M2, BUELL FIREBOLT XB12R, BUELL FIREBOLT XB9R, BUELL LIGHTNING X1, BUELL LIGHTNING XB12S, BUELL LIGHTNING XB9S, BUELL S1 WHITE LIGHTNING, BUELL S1, BUELL THUNDERBOLT S3, BUELL X1W WHITE LIGHTNING, HONDA 400X, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CBR250R (2011-)
Well-working front brake
I bought it as for Front for CBR250RR MC51
In terms of feel, it is almost the same as OEM.
However, brake dust comes out better on the Mega alloy and the wheel gets dirty easily.
So if you don't mind that, the lower-priced Mega alloy is better.
View detail
Fits: HONDA XR250, HONDA CR125, SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA tricker, YAMAHA SRV250, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), YAMAHA BJ, YAMAHA DT125R, YAMAHA BWS (Bewith), HONDA monkey
disappointed
I searched for parts from the car model on our site and purchased them, but could not install them. Crying I thought I could install it without any modification since I searched for parts by car model, but I am disappointed... View detail
Fits: SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA tricker, YAMAHA SRV250, HONDA XR250, HONDA CR125, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), SUZUKI street magic, SUZUKI Jebel 250XC, SUZUKI Jebel 200, SUZUKI Glass Tracker Big Boy
Cosmo!
I bought it immediately because of its affordable price.
The grip was also nice!
View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
2nd purchase
[How is it used? There is no problem. center belt, front and back, has a hole to put wire through.
How was your experience with it? It is durable, but due to the windy conditions in the area where we live and the fact that it is stored outdoors without a roof, it is likely that it will need to be replaced every few years.
How did it compare to other products? I feel it is strong.
[Points to note] If you want to continue to use the product without replacing it in a few years, you may want to consider a product on the top ranking. In my case, I had to replace it after about 15 months of use.
View detail
Fits: HONDA CBR400R, HONDA 400X, HONDA CB400F, HONDA NC750X, HONDA NC750S, HONDA NC750X LD, HONDA 400X, HONDA CB-1, HONDA CB250F, HONDA CB250F, HONDA CB400F, HONDA CB400FOUR, HONDA CB400SF, HONDA CB400SF Version R, HONDA CB400SS, HONDA CB750, HONDA CBF600S, HONDA CBR250R, HONDA CBR250R, HONDA CBR250RRR
The classic Red Pad
The standard Red Pad.
When I tried the Oil cooler on, the Hose came loose and hung over the Caliper and the Pad sucked the Oil.
I immediately tried to degrease it with PartsCleaner, but it still became a GarbagePad that did not work so well that it was no longer usable.
Therefore, Rotor was also degreased and a new Pad was installed.
After all, it works better.
Be careful not to get oil on it.
I'm converting an XR400 Motard Brake to an XR250, so the Pad part number is not helpful, though.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Looks cool!
The quality is better than the price, and I have driven 2000 km since installation and have not experienced any problems.
Breaking is not a problem, and I think the rigidity is sufficient.
I would recommend this product to everyone.
View detail
Fits: HONDA GIORNO CREA, HONDA JADE 250, HONDA JADE 250S, HONDA SILVER WINGGT400ABS, HONDA SILVER WINGGT400, HONDA SILVER WING, HONDA SILVER WINGFJS600, HONDA SHADOW125, HONDA CREA・SCOOPYSPECIAL Knife, HONDA CREA・CREA SCOOPYSPECIAL Knife, HONDA CREA・SCOOPY, HONDA CREA・CREA SCOOPY, HONDA XL-DEGREE250, HONDA XR250MOTARD, HONDA XR250, HONDA XR250, HONDA VTZ250, HONDA V-TWIN MAGNA250, HONDA X11, HONDA VTR
Recommended for VTR
I replaced the plug because the engine of my VTR-F was not running well and the plug seemed to have reached the end of its service life. I think it is the best plug for VTR. VTR is not easy to maintain. After replacing the plug, it is hard to put the plug cap back on.
I don't want to do this kind of work as much as possible, so the long-life MotoDX is perfect.
View detail
Fits: HONDA CBR400R, HONDA 400X, HONDA CB400F, HONDA NC750X, HONDA NC750S, HONDA NC750X LD, HONDA 400X, HONDA CB-1, HONDA CB250F, HONDA CB250F, HONDA CB400F, HONDA CB400FOUR, HONDA CB400SF, HONDA CB400SF Version R, HONDA CB400SS, HONDA CB750, HONDA CBF600S, HONDA CBR250R, HONDA CBR250R, HONDA CBR250RRR
Customized
Brake braking force is a little higher, and the control performance is higher for touring use. View detail
Fits: SUZUKI COBRA, SUZUKI GF250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSX250FX, SUZUKI GSX250R, SUZUKI GSX250S Katana, SUZUKI GSX250R, SUZUKI GSX250SP, SUZUKI GSX-R250R, SUZUKI GSX-R250SP, SUZUKI GSX250R, SUZUKI NZ250, SUZUKI NZ250S, SUZUKI ST250, SUZUKI WOLF250, SUZUKI BIG BOY, SUZUKI WOLF200, SUZUKI GSX-R125, SUZUKI GSX-S125
Weatherability
It is used outdoors
Color from Black to Color with ultraviolet light after one year.:It will change to Gray.
Color:The fabric is so thin when it's grays? The fabric is thin enough to be used for gray, but it tears when it is slightly caught!
Gold amount is also high and should last at least 2 years for outdoor use.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB-1, HONDA CB250F, HONDA CB250F, HONDA CB400F, HONDA CB400F, HONDA CB400FOUR, HONDA CB400SF, HONDA CB400SF Ver R, HONDA CB400SS, HONDA CB750, HONDA CBF600S, HONDA CBR250R, HONDA CBR250R, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR300R, HONDA CBR400R, HONDA CBR400R
brembo indeed!
I had newly delivered my GSX250R and replaced the brake pads with KITACO's HSSintered pads in the front and rear because I thought the brake was not working. Even after I replaced the pad with KITACO's pad, when the signal changed from Blue to Yellow, the brake did not work even if the signal was about 20 meters, so I often had to go over the stop line. It was really scary. My GSX has a Normal silencer and SP Tadao's Power Box Pipe, so the brake was completely outmatched by the power on the mountain roads. After replacing the pad with this one, the brake works so well that it seems like a double disc instead of a single disc. In town, the braking force rises quickly and easily after lever grip, and it is no longer impossible to stop at traffic lights. I was impressed by how much the pad alone has changed the way I drive. I have used DAYTONA's Golden, HYPERSintered, and KITACO's HSSintered on other motorcycles, but this brembo LAPad is by far the best in terms of effectiveness and control performance. I was considering using a mesh hose because the brake is a very large item, but I found it unnecessary because the pad replacement was sufficient. I thought what if the squeal was too much because they are not sold in Japan Motorcycle goods stores and I was not familiar with them, but when I received and saw the product, I thought that the surface treatment was very beautiful and if I chamfered it, it would be large and strong, so I used it and no squeal appeared. I will replace the pad with a brembo pad when I run out of rear tires. I would like to use this LASeries for other motorcycles, but I am a little disappointed that I only have SASeries for my motorcycles. I am looking forward to using SASeries, so that's good! It's a little pricey for a pad, but it's a good buy and a great recommendation.
I contacted WeBig because there was no anti-counterfeit card or QR code, but they told me that Brake Pads has neither anti-counterfeit card nor QR code. I was told that there is no possibility of counterfeit products and it is good that I can use the products with peace of mind.
View detail
Fits: HONDA NC750S, HONDA CB400F, YAMAHA XJ6S, YAMAHA XJ6F, YAMAHA XJ6F, HONDA NC750X, HONDA NC750X LD, HONDA NC750S, HONDA CB400SF Ver S, HONDA CB650F, HONDA CB400SF Ver R, HONDA CB400SF Ver S, HONDA CB400SF, HONDA CB400SF, HONDA CB400F, HONDA CB400FOUR, HONDA CB-1, HONDA BROS650, HONDA 400X, HONDA BROS400
Comparison with SBS 614LS
I replaced SBS 614LS with Golden Pad. The durability will be verified in the future. View detail
Fits: SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, HONDA FORZA Z, HONDA FUSION, YAMAHA RZ250, YAMAHA RZ350, YAMAHA TZR250, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ600, YAMAHA XJ600, YAMAHA XJ600, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XZ400, YAMAHA XZ550, YAMAHA YZF-R1, YAMAHA YZF-R6
It's bright
It shines very brightly and far, but does not illuminate the bottom very well.
Should I adjust the angle a little?
CYGNUS has a light at the bottom of the body, so I thought I had to up the memory by about 2Memory, but it turned out to be a bad idea.
The previous Today I was on had a Light on top of the body, and even then it wasn't very well lit underneath, so I'm not sure if that's the way it's supposed to be.
It is bright even on low, so if you don't pay attention to the distance between cars, you will naturally become an agitated driver lol.
During installation, the needle gold that holds the valve in place came off, and I couldn't figure out how to install it, so I spent about 30 minutes doing the "pusher-pusher" thing.
View detail
Fits: HONDA CB223S, YAMAHA MT03, YAMAHA RENAISSA, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YD250, YAMAHA YD125, YAMAHA TZR250, YAMAHA TDR250, YAMAHA MT-25, YAMAHA FZR250R, SUZUKI VOLTY, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI Gixxer, SUZUKI GRASS TRACKER, SUZUKI WOLF250, SUZUKI WOLF200, SUZUKI WOLF125, SUZUKI ST250
HONDA VTR250 with rear box
[How is it used?
HONDA VTR250 (with Rear box) with simple covered bicycle parking.
I also had a bar lock through the front wheel.
Was the one you received as per Image?
As per Image
HONDA VTR250 (with Rear box) was the perfect size.
HONDA VTR250 (with Rear box & Side bag) also entered Limit.
I put it on a MOTO GUZZI V7 (without Rear box and with Side bag) but the Exhaust System did not fit.
How was your experience with it?
I put it on and off every day for my Motorcycle commute and have no complaints.
[Points to note]
None in particular
Point and hang of installation
Just pour it on normally.
[ITEMS TO BUY TOGETHER
bar lock
[Opinions and requests to Manufacturer
I would like to see a fuller table of Size expansion and compatible car models.
Especially if the compatibility chart is complete, I can purchase another Size without anxiety (since I am currently driving a MOTO GUZZI V7 that is not on the compatibility chart).
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
With Pad exchange
When replacing the pad, the pin was replaced with this Stainless Steel.
It is good for rust resistance, but a little expensive.
Unlike the OEM Minus, the Cap part seems to be easy to remove and install.
View detail
Fits: HONDA 400X, HONDA CBR400R, HONDA NC750X, HONDA NC750X LD, HONDA NC750S, HONDA CB400F, YAMAHA Majesty S, YAMAHA Majesty 125, YAMAHA Majesty 125, YAMAHA Cygnus X, YAMAHA Cygnus X125SR FI, YAMAHA Cygnus X125SR FI, YAMAHA MT-01, YAMAHA BW'S125X, YAMAHA BW'S125, SUZUKI Sky Wave 650, SUZUKI Sky Wave 650, SUZUKI Gemma., SUZUKI Impulse 400 Type S, SUZUKI Impulse 400
Long life feeling
It works considerably better than NORMAL.
If you're going to go out of your way to buy OEM, this is the way to go.
View detail
Fits: HONDA 400X, HONDA CBR400R, HONDA NC750X, HONDA NC750X LD, HONDA NC750S, HONDA CB400F, YAMAHA Majesty S, YAMAHA Majesty 125, YAMAHA Majesty 125, YAMAHA Cygnus X, YAMAHA Cygnus X125SR FI, YAMAHA Cygnus X125SR FI, YAMAHA MT-01, YAMAHA BW'S125X, YAMAHA BW'S125, SUZUKI Sky Wave 650, SUZUKI Sky Wave 650, SUZUKI Gemma., SUZUKI Impulse 400 Type S, SUZUKI Impulse 400
work well
OEM replacement for GB250
I would like to see this level of effectiveness in de Fault as the OEM is hardly effective.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250X, HONDA XLR200R, HONDA NSR250R, HONDA NSR250R, HONDA NS250R, HONDA NS250R, HONDA NS250R, HONDA NS250F, HONDA NS250F, HONDA JADE, HONDA NS250F, HONDA JADE, HONDA JADE, HONDA JADE, HONDA JADE, HONDA XL600R, HONDA XL600R, HONDA XL600R, HONDA XL600R
Secondary reduction ratio change to high gear ratio
[How is it used?
FZS600 has the Largeest Torque of 6.2kg and Mission's 6-speed GEAR ratio is 1.074, which is enough for practical use but at high speed cruising, the car is running 100km/h at 5000rpm in 6th gear. I decided to change the front and rear sprockets and set a high geared secondary reduction ratio to lower the cruising speed a little more.
Was the one you received as per Image?
This lightweight Sprocket is anodized in Champagne gold. The processing quality is the most beautiful.
Was the installation difficult?
Since FZS600 is equipped with a center stand, the rear tire is floated, the wheel is removed, the Sprocket Nut is removed using the Impact Driver, the OEM Sprocket is replaced, the Nut is tightened using the Torque wrench, and the wheel is re-installed on the Swing Arm. Then, the Wheel is installed on the Swing Arm, the Chain tension is adjusted, and the work is finished. Even if you work at a leisurely pace, two hours should be sufficient.
How was your experience with it?
After changing the Driven Sprocket from OEM 15T to 17T and the Driven Sprocket from OEM 48T to 44T, and changing the secondary reduction ratio from 3.200 to 2.588, 100km/h cruising in 6th gear at 4000rpm became possible. Even with a secondary reduction ratio of 2.588, there was no lack of torque or difficulty in riding, and in fact, there was no jerkiness at low speeds, making the setting easy to drive and fatigue-free. However, the Axel is still too tight and the Axel opening angle increases, causing wrist fatigue, so we replaced it with an ACTIVE Throttle inner pipe 42Φ and compensated by making it High Solo. (OEM Throttle inner pipe is 37Φ)
In the case of FZS600, the fixing method of the Driven Sprocket is NutFixed Type as mentioned above, so both sides of the Sprocket can be used, making it more economical. (With the taper bolt type, only one side can be used.)
Also, the chain size was changed from the OEM 530 to 520 to match the front and rear Sprocket replacement to reduce weight.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I didn't notice it with the OEM Iron Sprocket, but the DuraluminSprocket has a GEAR squeal, or a squeaky operating noise. the Chain line is straight and not Gap, so is it a Material specific sound? It doesn't bother me that much during the ride, so I leave it alone.
View detail