Reviews
It got brighter.
I purchased this because Light was dark.
It brightened up as expected!
View detail
Easy power extraction
I put this on my 2023 CB1300SB and was able to connect it without removing the rear cowl. The price is reasonable and I am glad I bought it. View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
Fits: HONDA NC750X, HONDA NC700X, HONDA Silver wing600, HONDA Silver wing400, HONDA FORZA X, HONDA FORZA Z, HONDA PS250, HONDA FAZE, HONDA CBR250R, HONDA CBR250RR, HONDA VTR250, HONDA FTR223, YAMAHA FJR1300, YAMAHA XJR1300, YAMAHA XJR1200, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI ST250, KAWASAKI W650
very good
They took good care of us. Thanks to them, I was saved. View detail
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
Mounted on REBEL 1100
I couldn't find any for the Rebel 1100, but this product was said to be compatible with it, so I bought it and installed it as an ACC power source for the Fog Lamp Unit. It was a simple installation, just peel off the tape and install it between the couplers. View detail
DAYTONA DAYTONA Oil Filter
The oil filter for PMC's short oil pan was discontinued, so I looked up where the OEM was and found out it was made by DAYTONA. I don't know the difference, but the price from PMC was 2000 yen and DAYTONA was 1115 yen, about half the price, so I think the cost performance was good. I will continue to purchase. View detail
DXPlug
Simultaneous replacement with Ignition coil is effective. Acceleration seems to have improved. View detail
The product came with scratches.
As per Title, I received a scratched product. 。
The price is quite expensive, but I guess that's what you get from an outside parts company. 。 The installation method is also quite insecure, just drilling holes and screwing them in. 。 So I'm trying to figure out if I can put 3 points on Bolt and Nut, but this is very difficult (especially Quantity).:Pair (for Left and Right) (MF10 is a large strange thing, like if you do this, you can't put that, or if you put that, you can't put this afterwards. 。
I think it looks nice, so it's good for someone who can afford almost 30,000 without worrying about the details.
View detail
Good cosmetics, old standby.
[How is it used?
It has been a standard consumable for a long time. I use this Filter every time.
How was your experience with it?
The quality is stable and reliable. I am satisfied with the quality of the product and have had no problems with it.
[Points to note]
Even if you use Filter wrench, you may choose to use Wrench because it is a Type without corners. I have never had a problem because I stick the Driver in and remove it.
How did it compare to other products?
It is comparable to the OEM Product, and I don't think there are any problems. There is no visible difference in performance, but it is a good consumable item for periodic replacement due to its good cost performance.
View detail
Cost performance!
It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail
Fits: HONDA SILVER WING, HONDA FORZAX, HONDA FORZAZ, HONDA FUSION, PIAGGIO RUNNER 125200VXR, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE650 burgman, SYM RV125, YAMAHA MAXAM, YAMAHA MAJESTY(s)
I'm out...
Within six months, it snapped and cracked...
It is not hooked anywhere.
Normally, when I pulled it to remove it from the Motorcycle, it snapped.
I think this is the amount of force you would normally use to remove a Cover from a Motorcycle.
It is a waste, so I will Repair it with Tape and use it up.
I wish I could keep it for at least a year!
In case you are wondering, the Yamaha Cover I bought 9 years ago is still in service!
View detail
Fits: HONDA SILVER WING, HONDA FORZAX, HONDA FORZAZ, HONDA FUSION, PIAGGIO RUNNER 125200VXR, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE650 burgman, SYM RV125, YAMAHA MAXAM, YAMAHA MAJESTY(s)
Toruna Motorcycle Cover
I am using FORZAMF-08 with backrest and box under the carport.
The size is exact, and the thickness and durability are commensurate with the price.
Not sure if it is suitable for outdoor use.
View detail
MotoDX Plug LMAR8ADX-9S 94965
I bought the MotoDX Plug LMAR8ADX-9S 94965 to install on my pcx160, the normal plug stopped running after about 3000 km, so I bought the MotoDX Plug LMAR8ADX-9S 94965, the engine starts and runs smoother, the acceleration is also smoother. The engine noise has become quieter and I would like to buy it again. View detail
There are advantages and disadvantages.
Originally, the OEM had a sluggish initial speed, perhaps due to fuel consumption considerations. After the replacement, the response of Axel at the time of transmission is also better, and it is easier to handle for me personally.
However, the reaction was slightly lower fuel economy.
If you want to focus on the feel of the operation, it is Recommendation.
View detail
Excellent choice, cheaper than OEM.
Gotta have oil filters, right? I like to change filters often but don't want to put a bunch of money into it if I can avoid it.Great filters. I learned about these when I had an older bike and found out they supply alot of oem and aftermarket oil filters. Same quality as oem and there cheaper. Why not buy directly from the manufacturer. Never had an issue running these. The inner screen has extra large holes and the metal is folded nicely. The rubber grommets fit tight on the filter's metal end caps and they fit tight around the pressure relief insert Mt09. I give it 5 stars plus These filters are a good value and have worked great for us. View detail
subtle
I received it and tried to replace it, but I was worried that the pad pin might break off because it was so tight. I thought there might be a problem with the motorcycle body, but the Caliper was already OH'd and I did some chamfering and firring, but it did not improve the problem. I tried chamfering and firring, but it didn't improve the problem. The cause of the problem was the pad, because I didn't see any drag with a Japanese pad of the same thickness. I trusted brembo, the manufacturer, but I was very disappointed because the accuracy of the pad was poor and it was unusable. I had checked the compatibility of the pad before purchasing it, but it was a disappointing result. View detail
Just the right angle
The angle is just right, without being obtrusive.
The cost is a bit high, so I gave it a 4 for cost performance.
View detail
It's a good feeling
I saw my friend's Motorcycle and… Number angle is different! I thought ….
Myself too! And … Choyage has been good... ♪
A little customization can change the impression of Motorcycle!
Recommendation
However, since the Number mounting is Bolt-do→Nut-do
If you are BoltCustom, please be careful.
(since they will no longer be using Bolt)
View detail