Reviews
Fits: HONDA CBR400 R, HONDA GOLD WING, HONDA VTR1000, HONDA NC750S, HONDA NC750X, HONDA NC700X, HONDA DN-01, HONDA NC700S, HONDA VT1300CX, HONDA SHADOW400, HONDA SHADOW600, HONDA CTX700, HONDA INTEGEA, HONDA FORZA, HONDA Silver wing400, HONDA VTX1800, HONDA VTX1300, HONDA GOLD WING F6B, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
I installed it in the CB 750
I have been replacing the Oil Filter every two Oil changes because it is air-cooled and has been for years and I want to drive it for a long time. Installation is easy. View detail
Better movement.
[How is it used?
I recently acquired a long-abandoned VTR1000SP2 from an acquaintance. Whenever I buy a used car, I replace the stem bearings, not only to improve handling, but also to return the car to standard condition.
Was the one you received as per Image?
The usual HondaOEM Parts arrived. There is no doubt about it.
How was your experience with it?
The movement is still better.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Stem bearings should be replaced because everything moves better. Although it is a troublesome process, it is more effective.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Moriwaki master cylinder cap
I ordered these caps as an upgrade and to add a bit of style, my caps were as ever packaged and boxed to the highest standard,with only four screws holding these on both were fitted within minutes an easy upgrade for your cb13 View detail
Standard, no problem
It is a standard. No problem at all. View detail
purchasing a spare part
When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product.
View detail
For CB250F
Genuine product Spark (CR9E 98059-59916) Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
For CB250F
I am happy to deal with the webike team.Actually this item i could not found in my country (Batsugu, Service Butsuku 77251-342-000). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. View detail
For CB250F
Genuine product FuseF (10A)(MINI 98200-41000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Fits: HONDA CBR400 R, HONDA GOLD WING, HONDA VTR1000, HONDA NC750S, HONDA NC750X, HONDA NC700X, HONDA DN-01, HONDA NC700S, HONDA VT1300CX, HONDA SHADOW400, HONDA SHADOW600, HONDA CTX700, HONDA INTEGEA, HONDA FORZA, HONDA Silver wing400, HONDA VTX1800, HONDA VTX1300, HONDA GOLD WING F6B, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
Excellent piece
Genuine Honda part, new, high quality. It has a great finish and is well made internally. Comes with original tag from the brand in question. Fits adequately to my motorcycle. Reliable part. I recommend. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
I am satisfied
Low unit price and ScrewQuantity with Driver:2pc
It is good to be able to exchange easily.
Inexpensive foreign-made products may be poorly processed.
I have a lot of defective products and I don't want them to leak.
We chose MORIWAKI products, even if they are a little more expensive.
The look would have been better if it were made of Plating.
View detail
Abrahams chirp when they get used to it.
I bought this for my SILVER WING600for Front, and while the OEM Product is not necessarily sweet, it certainly feels sweet at the speeds I use it at. Especially at the beginning of the grip, I sometimes felt a slight twinge, so I decided to purchase the external product.
At first, I was looking for DAYTONA's GoldenPad, but it was not available due to the fact that the vehicle was old, so I looked elsewhere, but the brake was very special and there was an on-parade of incompatibilities, and eventually I settled on this brake.
I have to say that after the break-in period, I started to hear a jiggle sound every time I held it. At first I thought it was ABS noise, but it is not. I don't mind it in noisy places, but when I am touring on a mountain pass, the noise is just too much. Also, it seems to be very disc aggressive. I am wondering if I should replace the pad and disc at the same time next time.
View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
Fits: HONDA NC750X, HONDA NC700X, HONDA Silver wing600, HONDA Silver wing400, HONDA FORZA X, HONDA FORZA Z, HONDA PS250, HONDA FAZE, HONDA CBR250R, HONDA CBR250RR, HONDA VTR250, HONDA FTR223, YAMAHA FJR1300, YAMAHA XJR1300, YAMAHA XJR1200, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI ST250, KAWASAKI W650
very good
They took good care of us. Thanks to them, I was saved. View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
Large change in installation work
If you remove the handlebar cover of the scooter, a hole will be made there, and you just want to hide it.
I happened to have another job to replace the handlebar, so I worked on it in conjunction with that. In addition, there is nothing to hold the parts in place, so you have to use gold glue to fix the handles in place.
If you are not confident if you want to replace it, I suggest you ask Shop to do so.
View detail
DAYTONA DAYTONA Oil Filter
The oil filter for PMC's short oil pan was discontinued, so I looked up where the OEM was and found out it was made by DAYTONA. I don't know the difference, but the price from PMC was 2000 yen and DAYTONA was 1115 yen, about half the price, so I think the cost performance was good. I will continue to purchase. View detail
FOR CB250F
It's realy genuine and reasonable price.Spark (CR9E 98059-59916). It is Genuine. Very good packaging. Fast shipping. Thanks to the webike team. It Highly recommended. View detail