Reviews
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
Also for Restore of older vehicles.
[How is it used?
I acquired this product as part of the Restore process when I reached middle age, having acquired the vehicle of my dreams that I was unable to obtain during my Blue Spring days, "Run" "Bend" "Stop" The most important of the "Stop" Focusing on NISSIN for Peace of Mind In
Was the one you received as per Image?
It was the equipment that was equipped with Large body on the vehicle that I admired in the Racer replica era from the late 1980's. It was a product just like Image, and I am thankful for the age when we can easily purchase products with higher performance than those days at Motorcycle accessory stores and Webike.
How did it compare to other products?
The comparison was a longing for those of our generation. "Brembo" When YamahaOEM Product It was
Since then, brembo products have become easier to obtain and there is a wider selection of brembo products compared to Nisshin products. Very expensive."
And OEM Product, when I was allowed to test drive a friend's vehicle at that time. It doesn't work very well." I also have a feeling that it would be better to stick with the OEM, which I have always felt was the best way to go. And, above all, it is impossible to get new parts for the 1987 Motorcycle because the manufacturer has stopped selling them.
It's not that we don't have overhaul kits, but it's just not worth the time, effort, and money for something that doesn't work as well as it should...
in the manner of Works great." Affordable prices." Brand for Peace of Mind." The Nisshin brand is the best choice.
[Points to note]
Please check the compatibility with the Brake Caliper and the standard before purchasing.
When installing, be sure to connect and bleed the brake fluid properly, and be sure to install and maintain the brake troublemaker properly, as it can kill you and others.
[Included Parts:were they on?
All images attached on Webike's Site.
[Was there anything that disappointed you?
Nothing at all, so much so that I don't think it should be compared to the OEM time with Caliper. It works as well as it should." They will give it to you, and you will never go back to NORMAL again.
0Other items that may be useful include
Point and hang of installation
Both point and hang. We make sure each task is done right." It is important to
After temporarily assembling this product in the handlebar and aligning the position balance with the lever on the clutch side, firmly install the brake hose and brake caliper to prevent leakage, and be sure to bleed air from the brake fluid.
[ITEMS TO BUY TOGETHER
Let's replace the Brake hose, Caliper, and Pad.
Even if it is a Large kesa, at the very least, you should have new Brake fluid and hose connection washertc.
[Opinions and requests to Manufacturer
More and more people are restoring various old cars on SNS and YouTubeetc. video sites.
I have a feeling that demand will continue to increase in the coming years, and I look forward to the continuation of Lineup for many years to come.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Installed on SKYWAVE250 burgman (CJ43A)
The front master cylinder is deteriorating and I bought it instead of OH.
It has bolt holes for mirrors (with Reserver tank), so it may not be suitable for Cowl mirror cars.
It is more like an OEMSpec. ready-made product sold in Rose than aftermarket parts, and the prices are reasonable.
It is made by NISSIN, a trusted manufacturer, so people who do not want to use cheap Chinese products can rest assured.
Since it is basically an OEMSpec, there is no difference in feel between NORMAL and LARGE, and it is a kind of dress-up parts, but it comes with an adjust lever as a byproduct.
View detail
Fits: HONDA 400X, HONDA AfrIca TwIn, HONDA BROS I (NT650), HONDA BROS II(NT400), HONDA CB-1, HONDA CB-1 II, HONDA CB1000R, HONDA CB1000SF, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300DC X-4, HONDA CB1300SF, HONDA CB1300SB, HONDA CB400F, HONDA CB400Four, HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
For self-satisfaction.
I had about 4 Oil Filters as spares, so I could use the Oil Filters I had for the next 4 years.
I was very confused when I came to purchase the product.
I was wondering if the Gold amount is the same as replacing the CartridgeOil Filter 30+ times for the Gold amount.
However, I was excited and told myself that Engine oil flow is good without Garbage.
Since the purchase, MORIWAKI's Mark and colors have increased my satisfaction.
I also felt a little self-loathing because my motorcycle is a Rebel, so I don't turn it at high rpm, and I was later convinced that the oil fluidity had nothing to do with it.
I still have a CartridgeOil Filter and am considering whether to use it or not.
The sense of ownership is perfect.
View detail
Fits: HONDA NC700S, HONDA GL1500GOLD WING, HONDA GB250 CLUBMAN, HONDA CBR600RR, HONDA CBR600F, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB750, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB1300 SF, HONDA CB1100 RS, HONDA CB1100 EX, HONDA CB1100, HONDA CB1000 SF (Big One), HONDA CB-1, HONDA HORNET600
Looks Upgrading:??
The NORMAL feeling is not bad, but this one is more Upgrading??Cost is not bad either! View detail
Fits: HONDA GIORNO CREA, HONDA JADE 250, HONDA JADE 250S, HONDA SILVER WINGGT400ABS, HONDA SILVER WINGGT400, HONDA SILVER WING, HONDA SILVER WINGFJS600, HONDA SHADOW125, HONDA CREA・SCOOPYSPECIAL Knife, HONDA CREA・CREA SCOOPYSPECIAL Knife, HONDA CREA・SCOOPY, HONDA CREA・CREA SCOOPY, HONDA XL-DEGREE250, HONDA XR250MOTARD, HONDA XR250, HONDA XR250, HONDA VTZ250, HONDA V-TWIN MAGNA250, HONDA X11, HONDA VTR
Buy for durability alone.
The comparison is to the company's Windshield IRIDIUMIXPlug.
So there is little change in feel. It was just a little bit of Brush-bo, a little bit of gloss. I felt that it might be a little bit Brush-bo.
But it is also more durable, which means less maintenance, which is a big advantage for Cowl vehicles that are troublesome to replace.
The price difference is not expensive at all considering the usable distance, so I will probably only purchase and install this MotoDX plug when I run out of my current stock of standard Iridium plugs.
View detail
Fits: HONDA SH125, HONDA SH150, HONDA VFR750, HONDA Claire Skoopy., HONDA Claire Scoopy i, HONDA Clare Scoopy i-Special, HONDA Claire Scoopy Special, HONDA Shadow 125, KYMCO Venox 250, HONDA AX-1, HONDA CB-1, HONDA CB400 Super Four Version S, HONDA CB400 Fore, HONDA CB500, HONDA CB500S, HONDA CB900 Hornet, HONDA CBF1000, HONDA CBR400RR, HONDA CBR600F, HONDA CRF150R
ScooterAF57 NGK standard CR8EH-9 5666 Plug replacement
Scooter with more than 30,000 km was not able to climb hills, and it was hard to start the engine. We thought it was a problem with the engine, but after replacing the plug, we were amazed! The power is coming out and the car is accelerating very well. The Gear oil was also changed to a good one, so even with AxelOff, the speed did not drop and the car kept going.
I think it is better to replace the Plug every 20,000 km so that it can be run comfortably. I have been thinking that I have been putting a lot of strain on the engine. Before changing to a new car, I would like to change the plug first as a trial.
View detail
Fits: HONDA SILVERWING 600 [Silverwing] FNo: PF02-1000001-, HONDA SILVERWING 600 [Silverwing] FNo: PF01-1000001-1699999, HONDA SILVERWING 400 [SILVERWING] FNo: NF03-1000001-, HONDA SILVERWING 400 [SILVERWING] FNo: NF01-1000001-1599999, HONDA FORZA [FORZA] (MF06) FNO: MF08-1300001-, HONDA FORZA [FORZA] (MF06) FNO: MF08-1000001-1299999, HONDA SILVERWING 600 [Silverwing] FNo: PF02-1000001-, HONDA SILVERWING 600 [Silverwing] FNo: PF01-1000001-1699999, HONDA SILVERWING 400 [SILVERWING] FNo: NF03-1000001-, HONDA SILVERWING 400 [SILVERWING] FNo: NF01-1000001-1599999, HONDA FORZA [FORZA] (MF06) FNO: MF08-1300001-, HONDA FORZA [FORZA] (MF06) FNO: MF08-1000001-1299999
It was diverted to the Front Tappet CoverO-ring of XR250.
(Reference is at your own risk...)
XR250BAJA (1998 MD30/MD17E) was experiencing after fire while running. the front of the engine was particularly noisy, so we investigated and found an oil leak from the Front Tappet Cover. The leak was only at one place, but we decided to replace all of them (4 places) by the way. I found the OEM (part number 91301-428-003) at an auction, but it was too expensive, so I bought this product of the same size (35.5×3mm) and replaced it. Fire is also improved, so I give it 5 stars. By the way, there was no crack on the O-ring before the replacement, but the elasticity was gone.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600FS, HONDA CBR600F, HONDA CBR600F, HONDA CBR400R, HONDA CBR600F4i, HONDA CBR250RR, HONDA CBR400R, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR-R FIREBLADE, HONDA CB900F, HONDA CB750, HONDA CB650F, HONDA CB650R, HONDA CB400SF
Oil Filter
I purchased the Oil Filter and put it on my mt09, it is a good and stable product. View detail
Fits: HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB650F, HONDA CB650R, HONDA CB650R, HONDA CB650R, HONDA CB750, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000L Africa Twin
EasyCustomization
ScrewQuantity:The two components can be easily installed by simply removing them, and they are now visible while driving and look very much like a parenthesis. This is the easiest customization. View detail
Fits: HONDA GIORNO CREA, HONDA JADE 250, HONDA JADE 250S, HONDA SILVER WINGGT400ABS, HONDA SILVER WINGGT400, HONDA SILVER WING, HONDA SILVER WINGFJS600, HONDA SHADOW125, HONDA CREA・SCOOPYSPECIAL Knife, HONDA CREA・CREA SCOOPYSPECIAL Knife, HONDA CREA・SCOOPY, HONDA CREA・CREA SCOOPY, HONDA XL-DEGREE250, HONDA XR250MOTARD, HONDA XR250, HONDA XR250, HONDA VTZ250, HONDA V-TWIN MAGNA250, HONDA X11, HONDA VTR
MotoDxPlug
Idling is more stable and I feel like it blows better. I think it is a good product. View detail
Fits: HONDA XR250, HONDA CR125, SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA tricker, YAMAHA SRV250, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), YAMAHA BJ, YAMAHA DT125R, YAMAHA BWS (Bewith), HONDA monkey
disappointed
I searched for parts from the car model on our site and purchased them, but could not install them. Crying I thought I could install it without any modification since I searched for parts by car model, but I am disappointed... View detail
Fits: HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB650F, HONDA CB650R, HONDA CB650R, HONDA CB650R, HONDA CB750, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000L Africa Twin
Up Fashion around Handlebar??
The installation work is quick and easy, and the coloring around the handlebar adds a fashionable touch. View detail
Fits: SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA tricker, YAMAHA SRV250, HONDA XR250, HONDA CR125, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), SUZUKI street magic, SUZUKI Jebel 250XC, SUZUKI Jebel 200, SUZUKI Glass Tracker Big Boy
Cosmo!
I bought it immediately because of its affordable price.
The grip was also nice!
View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA MAGNA750, HONDA MAGNA750, HONDA HORNET600S, HONDA HORNET600, HONDA BROS650, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FORZA Si, HONDA XELVIS, HONDA FAZE, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Silver wing600
high
Gasket exchange itself is something I think some people leave to Shop,
I would have liked to see some notes on the exchange.
Price could be a little lower.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Looks cool!
The quality is better than the price, and I have driven 2000 km since installation and have not experienced any problems.
Breaking is not a problem, and I think the rigidity is sufficient.
I would recommend this product to everyone.
View detail
Fits: HONDA GIORNO CREA, HONDA JADE 250, HONDA JADE 250S, HONDA SILVER WINGGT400ABS, HONDA SILVER WINGGT400, HONDA SILVER WING, HONDA SILVER WINGFJS600, HONDA SHADOW125, HONDA CREA・SCOOPYSPECIAL Knife, HONDA CREA・CREA SCOOPYSPECIAL Knife, HONDA CREA・SCOOPY, HONDA CREA・CREA SCOOPY, HONDA XL-DEGREE250, HONDA XR250MOTARD, HONDA XR250, HONDA XR250, HONDA VTZ250, HONDA V-TWIN MAGNA250, HONDA X11, HONDA VTR
Recommended for VTR
I replaced the plug because the engine of my VTR-F was not running well and the plug seemed to have reached the end of its service life. I think it is the best plug for VTR. VTR is not easy to maintain. After replacing the plug, it is hard to put the plug cap back on.
I don't want to do this kind of work as much as possible, so the long-life MotoDX is perfect.
View detail
Fits: HONDA NC700S, HONDA GL1500GOLD WING, HONDA GB250 CLUBMAN, HONDA CBR600RR, HONDA CBR600F, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB750, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB1300 SF, HONDA CB1100 RS, HONDA CB1100 EX, HONDA CB1100, HONDA CB1000 SF (Big One), HONDA CB-1, HONDA HORNET600
The old master cylinder cover was really bad
There was a master cylinder cover that was completely different from the concept of the existing bike. It was neither aesthetic nor functional, and there was no reason to keep wearing it. So I decided to install a new one and searched on Webike. I am grateful to have found such a good product, and I will have to buy more in advance. -------------------------------------------------- -------- There was a master cylinder cover that was completely different from the bike's concept. This was neither aesthetic nor functional, but there was no reason to keep it. So I decided to install it and searched in Webike. Thank you for finding such a good product, and I should buy it in advance. Powered by Google Translator View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FS, HONDA CBR600FS, HONDA CBR600FS, HONDA CBR600FR, HONDA CBR600F4i, HONDA CBR600F4i, HONDA CBR600F4i, HONDA CBR600F4i, HONDA CBR600F, HONDA CBR600F
There's no doubt about it.
It was as good as expected. Great cosmetics. ?? View detail
Fits: HONDA SHADOW750Classic, HONDA VT750S, HONDA Shadow slasher 750, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450R, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450R, HONDA DN-01, HONDA TRANSALP 600V, HONDA Silver wing 600, HONDA SHADOWPHANTOM 750, HONDA CRF450R, HONDA CRF450R, HONDA Silver wing 400, HONDA Shadow slasher, HONDA Shadow slasher, HONDA SHADOW 400 Classic, HONDA VT400S
Included Parts:I bought it because it wasn't
Purchased as needed to replace Slip-on Silencer View detail
Fits: TRIUMPH Legend TT, TRIUMPH Bonneville T214, TRIUMPH Bonneville T120 Black, TRIUMPH Bonneville T120, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville Street Cup, TRIUMPH Bonneville Sprit, TRIUMPH Bonneville SE, TRIUMPH Bonneville SE, TRIUMPH Bonneville Newchurch, TRIUMPH Bonneville Bobber, TRIUMPH Bonneville Black, TRIUMPH Bonneville America, TRIUMPH Bonneville 800, TRIUMPH Bonneville, TRIUMPH Bonneville, TRIUMPH Bonneville
Used for CBR250RR MC22
[How is it used?
I recently installed it on a CBR250RRMC22 Front.
No actual driving has been done.
How was your experience with it?
Installation was fine. I can't say for sure since I haven't done any actual driving, but I didn't think there was anything wrong with the equipment.
I'm hoping to see how long it will last.
How did it compare to other products?
The price is inexpensive.
[Points to note]
Please check the compatibility of Front and Rear.
View detail